Journal of Econometrics 178 (2014) 231–242

Contents lists available at ScienceDirect

Journal of Econometrics journal homepage: www.elsevier.com/locate/jeconom

Testable implications of affine term structure models✩ James D. Hamilton a,∗ , Jing Cynthia Wu b a

Department of Economics, University of California, San Diego, United States

b

Booth School of Business, University of Chicago, United States

article

info

Article history: Available online 5 September 2013

abstract Affine term structure models have been used to address a wide range of questions in macroeconomics and finance. This paper investigates a number of their testable implications which have not previously been explored. We show that the assumption that certain specified yields are priced without error is testable, and find that the implied measurement or specification error exhibits serial correlation in all of the possible formulations investigated here. We further find that the predictions of these models for the average levels of different interest rates are inconsistent with the observed data, and propose a more general specification that is not rejected by the data. © 2013 Elsevier B.V. All rights reserved.

1. Introduction Affine term structure models have become a fundamental tool for empirical research in macroeconomics and finance on the term structure of interest rates. The appeal of the framework comes from the closed-form solutions it provides for bond and bond option prices under the assumption that there are no possibilities for risk-free arbitrage (Duffie et al., 2000). ATSM have been used for purposes such as measuring risk premia (Duffee, 2002; Cochrane and Piazzesi, 2009), studying the effect of macroeconomic developments on the term structure (Ang and Piazzesi, 2003; Beechey and Wright, 2009; Bauer, 2011), the role of monetary policy (Rudebusch and Wu, 2008), explaining the bond-yield ‘‘conundrum’’ of 2004–2005 (Rudebusch et al., 2006), inferring market expectations of inflation (Christensen et al., 2010), and evaluating the effects of the extraordinary central bank interventions during the financial crisis (Christensen et al., 2009; Smith, 2010; Hamilton and Wu, 2012a). Gürkaynak and Wright (2012) and Rudebusch (2010) provide useful surveys of this literature. Clive Granger’s primary interest was not in a model’s theoretical elegance, but instead in its practical relevance. He would always want to know whether the framework generates useful forecasts, and whether the properties of those forecasts could be used to test some of the model’s implicit assumptions. To be sure, forecasting interest rates has been one important goal for many users of ATSM. Improved forecasts are cited by Ang and Piazzesi (2003)

✩ We thank Jonathan Wright and anonymous referees for helpful comments on an earlier draft of this paper. ∗ Corresponding author. E-mail addresses: [email protected] (J.D. Hamilton), [email protected] (J.C. Wu).

0304-4076/$ – see front matter © 2013 Elsevier B.V. All rights reserved. http://dx.doi.org/10.1016/j.jeconom.2013.08.024

as an important reason for including observed macroeconomic factors in the model, and by Christensen et al. (2011) as an advantage of their dynamic Nelson–Siegel specification.1 And comparing the fit of a broad class of different models has been attempted by Dai and Singleton (2000), Hong and Li (2005) and Pericoli and Taboga (2008). However, as implemented by these researchers, making these comparisons is an arduous process requiring numerical estimation of highly nonlinear models on ill-behaved likelihood surfaces. As a result, previous researchers have overlooked some of the basic empirical implications of these models that are quite easy to test empirically. In a companion paper (Hamilton and Wu, 2012b), we note that an important subset of ATSMs imply a restricted vector autoregression in observable variables. These restrictions take two forms: (1) nonlinear restrictions on the VAR coefficients implied by the model, and (2) blocks of zero coefficients. In this paper, we test the first class of restrictions using the χ 2 test developed by Hamilton and Wu (2012b), and note that the second class of restrictions often take the form of simple and easily testable Granger-causality restrictions, and indeed provide an excellent illustration of Granger’s (1969) proposal that testing such forecasting implications can often be a very useful tool for evaluating a model. We apply these tests to the data and find that the assumptions that are routinely invoked in these models can in fact be routinely rejected. We show that the assumption that certain specified yields are priced without error is testable, and find that the implied measurement or specification error exhibits serial correlation in

1 On the other hand, Duffee (2011a) found that the ATSM cross-section restrictions do not and should not help with forecasting.

232

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

all of the possible formulations investigated here.2 We further demonstrate that the predictions of these models for the average levels of different interest rates are inconsistent with the observed data. We find that a specification in which (1) the term structure factors are measured by the first three principal components of the set of observed yields, (2) predictions for average levels of interest rates are relaxed, and (3) measurement error is serially correlated, can be reconciled with the observed time series behavior of interest rates. We illustrate how Granger-causality tests can also be used to determine the specification of complicated macro-finance term structure models. Such tests suggest that a strong premium should be placed on parsimony. 2. Affine term structure models Let Pnt denote the price at time t of a pure-discount bond that is certain to be worth $1 at time t + n. A broad class of finance models posit that Pnt = Et (Mt +1 Pn−1,t +1 ) for some pricing kernel Mt +1 . Affine term structure models suppose that the price Pnt depends on a possibly unobserved (m × 1) vector of factors Ft that follows a Gaussian first-order vector autoregression, Ft +1 = c + ρ Ft + Σ ut +1

(1)

with ut an i.i.d. sequence of N (0, Im ) vectors. The second component of ATSM is the assumption that the pricing   kernel is characterized by Mt +1 = exp −rt − 21 λ′t λt − λ′t ut +1 for rt the risk-free one-period interest rate and λt an (m × 1) vector that characterizes investors’ attitudes toward risk; λt = 0 would correspond to risk neutrality. Both this risk-pricing vector and the risk-free rate are postulated to be affine functions of the vector of factors: λt = λ + ΛFt and rt = δ0 + δ1′ Ft . The risk-free rate rt is simply the negative of the log of the price of a one-period bond,

of the yields on m others should have an R2 of unity. Although such an R2 is not actually unity, it can be quite high, and this observation motivates the claim that a small number m of factors might be used to give an excellent prediction of any bond yield. One common approach is to suppose that there are m linear combinations of Yt for which (6) holds exactly, Y1t = A1 + B1 Ft

(10)

where the (m × 1) vector Y1t is given by Y1t = H1 Yt for H1 an (m × N ) matrix, A1 = H1 A, and B1 = H1 B. The matrix H1 might simply select a subset of m particular yields (e.g., Chen and Scott, 1993; Ang and Piazzesi, 2003), or alternatively could be interpreted as the matrix that defines the first m principal components of Yt (e.g., Joslin et al., 2011). The remaining Ne = N − m yields are assumed to be priced with error, Y2t = A2 + B2 Ft + u2t

(11)

for u2t an (Ne × 1) vector of measurement or specification errors, Y2t = H2 Yt , A2 = H2 A, and B2 = H2 B for H2 (Ne × N). The measurement errors have invariably been regarded as serially and mutually independent, u2t ∼ i.i.d. N (0, Σe Σe′ ) for Σe a diagonal matrix, and with the sequence {u2t } assumed to be independent of the factor innovations {ut } in (1). 3. Testable implications when only yield data are used

rt = log(P0,t +1 /P1t ) = log(1) − log(P1t ) = −p1t ,

In this section we consider the popular class of models in which the entire vector of factors Ft is treated as observed only through the yields themselves. We first describe the implications for the underlying VAR in Yt , and then investigate tests of the various restrictions.

for pnt = log(Pnt ). After a little algebra (e.g., Ang and Piazzesi, 2003), the above equations imply that

3.1. VAR representation



pnt = an + bn Ft

As in Hamilton and Wu (2012b), we premultiply (1) by B1 ,

where the values of bn and an can be calculated recursively from ′



bn = bn−1 ρ − δ1

(2)

ρ = ρ − ΣΛ

(3)



Q

Q





an = an−1 + bn−1 c Q + (1/2)bn−1 ΣΣ ′ bn−1 − δ0

(4)

cQ = c − Σ λ

(5)

starting from b1 = −δ1 and a1 = −δ0 . The implied yield on an n-period bond, ynt = −n−1 pnt , is then characterized by

1 B1 Ft +1 = B1 c + B1 ρ B− 1 B1 Ft + B1 Σ ut +1 .

Adding A1 to both sides and using (10), ∗ Y1,t +1 = A∗1 + φ11 Y1t + u1,t +1

(12)

1 A∗1 = A1 + B1 c − B1 ρ B− 1 A1

(13)

φ11 = B1 ρ B1

(14)

u1,t +1 = B1 Σ ut +1 .

(15)



−1

ynt = an + b′n Ft

(6)

Similar operations on (11) produce

bn = −n−1 bn

(7)

∗ Y2t = A∗2 + φ21 Y1t + u2t

(16)

(8)

1 A∗2 = A2 − B2 B− 1 A1

(17)

φ21 = B2 B1 ,

(18)

an = −n

−1

an .

Suppose we observe a set of N different yields, Yt (yn1 ,t , yn2 ,t , . . . , ynN ,t )′ , and collect (6) into a vector system Yt = A + BFt

= (9)

for A an (N × 1) vector whose ith element is ani and B an (N × m) matrix whose ith row is b′ni . If m < N, then the model (9) is instantly refuted, because it implies that a regression of any one

2 Duffee (2011a) has also noted the substantial serial correlation of measurement errors.



−1

for u2t the identical error as in (11). Under the assumptions made above for ut and u2t , the error u1,t +1 in (12) is uncorrelated with {Yt , Yt −1 , . . .}, and u2t in (16) is uncorrelated with {Yt −1 , Yt −2 , . . .}. Hence although the nonlinear recursions that define the ATSM are quite complicated, the fundamental structure is very simple—the ATSM is simply a ′ vector autoregression for (Y1t , Y2t′ )′ that is subject to a variety of restrictions. A number of these restrictions are quite simple to test without using the core equations (2) and (4), as we now discuss.

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

3.2. Granger-causality tests: Y1 Eqs. (12) and (16) are a special case of a VAR(1), whose first block in the absence of restrictions would take the form ∗ ∗ Y1t = A∗1 + φ11 Y1,t −1 + φ12 Y2,t −1 + u1t .

(19)

In other words, the ATSM implies that the yields priced with error Y2 should not Granger-cause the yields priced without error Y1 . Since the coefficients of this unrestricted VAR can be estimated using OLS equation by equation, this is an extremely straightforward hypothesis to test. We test this implication using end-of-month constant-maturity Treasury yields taken from the daily FRED database of the Federal Reserve Bank of St. Louis, using maturities of 3 months, 6 months, 1 year, 2 years, 3 years, 5 years, 7 years and 10 years. All the insample estimation was based on the subsample from 1983:M1 to 2002:M7, with the subsequent 60 months (2002:M8–2007:M7) reserved for out-of-sample exercises.3 For our baseline example, we use m = 3 factors and suppose that 3 yields – namely the 6-month, 2-year, and 10-year yields – are priced without error (Y1t = (y6t , y24t , y120t )′ ), while the other yields are priced with error (Y2t = (y3t , y12t , y36t , y60t , y84t )′ ). The first row of Table 1 reports tests for Granger-causality from Y2 to Y1 for this specification. An F -test of the null hypothesis that the ∗ first row of φ12 is zero (in other words, that Y2,t −1 does not help predict the 6-month yield) leads to strong rejection with a p-value ∗ of 0.006. Analogous tests that the second and third rows of φ12 are zero (Y2,t −1 does not predict y24,t or y120,t ) fail to reject with pvalues of 0.198 and 0.204. A likelihood ratio test with Sims’ smallsample correction4 of the null hypothesis that all 15 elements of ∗ φ12 are zero leads to very clear rejection (last column of row 1). This test makes apparent that the specification of which yields are assumed to be priced without error is not an arbitrary normalization, but instead is a testable restriction. If Y2t is priced with error, it should contain no information about the factors beyond that contained in Y1t , and therefore should not help to predict Y1,t +1 . If some maturities are more helpful than others for forecasting, those are the ones we would want to include in Y1t for the ATSM to be consistent with the data. In the subsequent rows of Table 1 we report   analogous F -tests and likelihood ratio tests for each of the

8 3

= 56 possible choices we could have made for

the 3 yields to include in Y1t . It turns out that every single possible specification of Y1t is inconsistent with the data according to the likelihood ratio test. Granger (1980) expressed the view that one wants with these tests to consider true predictive power, which may be different from the ability to fit a given observed sample of data. For this reason, Granger stressed the importance of out-of-sample evaluation. In this spirit, we estimated (19) for t = 1, 2, . . . , T and used the resulting coefficients and values of Y1T and Y2T to predict the value of Y1,T +1 , whose ith element we denote yˆ i,T +1 and

Table 1 In-sample Granger causality tests of null hypothesis that Y2 does not Granger-cause Y1 for alternative specifications for Y1 . Table entries report p-values. First three columns report p-value for predictability of the ith element of Y1 , while last column tests predictability of the full vector Y1 . Regressions estimated 1983:M1–2002:M7. Specification of Y1t

Granger-causality tests 1st

2nd

3rd

System

6m, 2y, 10y 6m, 2y, 3m 6m, 2y, 1y 6m, 2y, 3y 6m, 2y, 5y 6m, 2y, 7y 6m, 10y, 3m 6m, 10y, 1y 6m, 10y, 3y 6m, 10y, 5y 6m, 10y, 7y 6m, 3m, 1y 6m, 3m, 3y 6m, 3m, 5y 6m, 3m, 7y 6m, 1y, 3y 6m, 1y, 5y 6m, 1y, 7y 6m, 3y, 5y 6m, 3y, 7y 6m, 5y, 7y 2y, 10y, 3m 2y, 10y, 1y 2y, 10y, 3y 2y, 10y, 5y 2y, 10y, 7y 2y, 3m, 1y 2y, 3m, 3y 2y, 3m, 5y 2y, 3m, 7y 2y, 1y, 3y 2y, 1y, 5y 2y, 1y, 7y 2y, 3y, 5y 2y, 3y, 7y 2y, 5y, 7y 10y, 3m, 1y 10y, 3m, 3y 10y, 3m, 5y 10y, 3m, 7y 10y, 1y, 3y 10y, 1y, 5y 10y, 1y, 7y 10y, 3y, 5y 10y, 3y, 7y 10y, 5y, 7y 3m, 1y, 3y 3m, 1y, 5y 3m, 1y, 7y 3m, 3y, 5y 3m, 3y, 7y 3m, 5y, 7y 1y, 3y, 5y 1y, 3y, 7y 1y, 5y, 7y 3y, 5y, 7y

0.006** 0.000** 0.005** 0.065 0.049* 0.020* 0.000** 0.010** 0.001** 0.000** 0.000** 0.003** 0.000** 0.000** 0.000** 0.010** 0.015* 0.012* 0.012* 0.004** 0.000** 0.183 0.176 0.216 0.602 0.346 0.182 0.188 0.193 0.183 0.192 0.205 0.181 0.176 0.165 0.278 0.289 0.259 0.301 0.264 0.219 0.263 0.232 0.282 0.230 0.222 0.010** 0.018* 0.013* 0.014* 0.004** 0.000** 0.043* 0.020* 0.008** 0.188

0.198 0.219 0.223 0.235 0.242 0.211 0.522 0.205 0.215 0.252 0.232 0.002** 0.003** 0.004** 0.004** 0.022* 0.024* 0.023* 0.118 0.111 0.124 0.243 0.203 0.296 0.314 0.241 0.004** 0.080 0.060 0.023* 0.075 0.086 0.049* 0.109 0.159 0.179 0.009** 0.001** 0.000** 0.000** 0.011* 0.010** 0.011* 0.357 0.179 0.110 0.017* 0.018* 0.018* 0.106 0.109 0.140 0.108 0.111 0.145 0.164

0.204 0.002** 0.021* 0.155 0.086 0.110 0.004** 0.022* 0.116 0.164 0.206 0.021* 0.141 0.151 0.252 0.128 0.081 0.110 0.082 0.110 0.121 0.006** 0.025* 0.249 0.391 0.263 0.018* 0.112 0.080 0.121 0.141 0.090 0.112 0.081 0.126 0.134 0.017* 0.119 0.184 0.243 0.128 0.217 0.217 0.332 0.235 0.161 0.106 0.090 0.142 0.081 0.124 0.137 0.082 0.110 0.124 0.129

0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.001** 0.000** 0.000** 0.002** 0.000** 0.000** 0.002** 0.001** 0.000** 0.000** 0.001** 0.002** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.018* 0.001** 0.000** 0.000** 0.000** 0.000** 0.000** 0.015* 0.000** 0.000** 0.000** 0.019* 0.049* 0.002** 0.000** 0.000** 0.000** 0.000** 0.000** 0.004**

*

3 We have also repeated many of the calculations reported below using the alternative measures of interest rates developed by Gürkaynak et al. (2007) and came up with broadly similar results. 4 Let uˆ denote the vector of OLS residuals from estimation of (19) over t = 1t

ˆ 1 = T −1 1, . . . , T and Ω

T

t =1

uˆ 1t uˆ ′1t . Let u˜ 1t denote the vector of OLS residuals

T

ˆ 0 = T −1 t =1 u˜ 1t u˜ ′1t . Then when Y2,t −1 is dropped from the equation with Ω     ˆ  ˆ  as in Hamilton (1994), equation [11.1.34], (T − N − 1)(log Ω 0  − log Ω1 ) is approximately χ 2 (m(N − m)) for N the dimension of Yt and m the dimension of Y1t . All system-wide likelihood ratio tests reported in this paper use this smallsample correction, with the exception of Table 9, in which there are differing degrees of freedom across equations.

233

**

Denotes rejection at the 5% level. Denotes rejection at the 1% level.

associated forecast error εˆ i,T +1 . We also estimated the restricted

∗ regressions with φ12 = 0 to calculate a restricted forecast yˆ ∗i,T +1 ∗ and error εˆ i,T +1 . We then increased the sample size by one to generate yˆ i,T +2 and yˆ ∗i,T +2 , and repeated this process for T +

1, T + 2, . . . , T + R. The columns in Table 2 report the percent

improvement in post-sample mean squared error,

234

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

R  2  2   R−1 εˆ i∗,T +r − εˆ i,T +r

Table 2 Out-of-sample Granger causality tests of null hypothesis that Y2 does not Granger-cause Y1 for alternative specifications for Y1 . Table entries report percent improvement in MSE for the equation that includes Y2,t −1 over the equation that does not. Based on recursive regressions generating out-of-sample forecasts for 2002:M8–2007:M7.

r =1

R−1

R   r =1

εˆ i∗,T +r

2 

for i corresponding to the first, second, or third element of Y1t for each of the 56 possible choices of Y1t . For example, inclusion of Y2,t −1 leads to a 25% out-of-sample improvement in forecasting the 6-month yield and an 8% improvement for the 2-year yield for Y1t = (y6t , y24t , y120t )′ . Clark and West (2007) discussed the statistical significance of such post-sample comparisons, noting that even if the null hypothesis is false (that is, even if Y2,t −1 actually is helpful in predicting Y1t ) we might expect the above statistic to be negative as a result of sampling uncertainty. They proposed a test statistic that corrects for this which, while not asymptotically normal, seems to be reasonably well approximated by the N (0, 1) distribution,



Rs

C = 

R

R−1



(sT +r − s)2

r =1

for s = R−1



 2  2 R sT +r and sT +r = εˆ i∗,T +r − εˆ i,T +r +  2 r =1

yˆ ∗i,T +r − yˆ i,T +r . Table 2 records whether the Clark–West statistic leads to rejection based on the N (0, 1) approximation to a onesided test.5 For 51 out of the 56 possible specifications of Y1t , the out-of-sample evidence that Y2,t −1 helps forecast Y1t is statistically significant at the 5% level for at least one of the elements of Y1t .6 One might think that perhaps the issue is that there may be more than 3 factors in Y1t . We repeated the in-sample tests   of whether Y2 Granger-causes Y1 for each of the

8 4

= 70

possible ways that a 4-dimensional vector Y1t could be chosen from Yt . For 66 of these possibilities, the likelihood ratio test leads to rejection, and the 4 that are not rejected by this test turn out to be inconsistent with the Y2 Granger-causality tests reported in the next subsection. If we let Y1t be a 5-dimensional vector, 52 of the 56 possibilities are rejected, and again the 4 that are not rejected here will be rejected by the tests below. Twenty-three of the 28 possible choices for a 6-dimensional factor vector are rejected. And even if we say that 7 of the 8 yields in Yt are themselves term-structure factors, for 5 of the 8 possible choices, we find that the one omitted yield Granger-causes the remaining 7. Even if no single choice for the yields to include in Y1t is consistent with the data, is there some other linear combination of Yt that satisfies the Granger-causality restriction? One popular choice is to use the first 3 principal components of Yt as the value for Y1t , that is, use Y1t = (z1t , z2t , z3t )′ for zit = h′i Yt and hi the eigenvector associated with the ith largest eigenvalue of T −1

T 

Y˜t Y˜t′

(20)

t =1

where elements of Y˜t are obtained by subtracting the mean of the corresponding elements of Yt . The first row of Table 3 reports p-values for tests that the first 3 principal components can be predicted from the last 5, both individually (first 3 columns) and

5 That is, * indicates a value of C above 1.645 and ** a value above 2.33. 6 One might note that the biggest out-of-sample improvements come from yields of 1-year maturity or less. We attribute this to the fact that over the post-sample evaluation period (2002:M8–2007:M7), short rates exhibited a dramatic swing down and back up while long rates remained fairly flat—there is simply more for the regression to forecast with short rates than long rates on this subsample.

Specification of Y1t

6m, 2y, 10y 6m, 2y, 3m 6m, 2y, 1y 6m, 2y, 3y 6m, 2y, 5y 6m, 2y, 7y 6m, 10y, 3m 6m, 10y, 1y 6m, 10y, 3y 6m, 10y, 5y 6m, 10y, 7y 6m, 3m, 1y 6m, 3m, 3y 6m, 3m, 5y 6m, 3m, 7y 6m, 1y, 3y 6m, 1y, 5y 6m, 1y, 7y 6m, 3y, 5y 6m, 3y, 7y 6m, 5y, 7y 2y, 10y, 3m 2y, 10y, 1y 2y, 10y, 3y 2y, 10y, 5y 2y, 10y, 7y 2y, 3m, 1y 2y, 3m, 3y 2y, 3m, 5y 2y, 3m, 7y 2y, 1y, 3y 2y, 1y, 5y 2y, 1y, 7y 2y, 3y, 5y 2y, 3y, 7y 2y, 5y, 7y 10y, 3m, 1y 10y, 3m, 3y 10y, 3m, 5y 10y, 3m, 7y 10y, 1y, 3y 10y, 1y, 5y 10y, 1y, 7y 10y, 3y, 5y 10y, 3y, 7y 10y, 5y, 7y 3m, 1y, 3y 3m, 1y, 5y 3m, 1y, 7y 3m, 3y, 5y 3m, 3y, 7y 3m, 5y, 7y 1y, 3y, 5y 1y, 3y, 7y 1y, 5y, 7y 3y, 5y, 7y

Out-of-sample improvement in MSE 1st

2nd

25%** 25%** 19%** 10%** 17%** 15%** −4%* 4%* 28%** 29%** 33%** 39%** 11%** −2%* −5%* 5%* −3% −4% 23%** 18%** 16%** 7%* 8%* 5%* 2% −3% 5% 4% 5% 6% 7%* 8%* 8%* 7%* 6%* 8%* 0% −1% −2% −2% 0% −2% −2% −3% −1% 1% −1%* −7% −7% 28%** 26%** 30%** 24%** 21%** 22%** 6%*

8%* 9%* 5%* 6% 7% 7%* 2% −1% 0% −2% −2% 16%** −10% −18% −19% 16%** 13%** 13%** 6% 6%* 3% −1% 0% −3% −4% −2% 13%** 6%* 17%** 17%** 22%** 25%** 23%** 4% 4% 2% 0%* 36%** 43%** 53%** 24%** 23%** 15%** 0% 0% 4% 8%** 5%* 6%* 5% 6%* 4% 6% 6%* 3% 3%

3rd 0%

−1%* 21%** 4% 4% 3% −17% 16%** 6%* 2% 0% 18%** 7%* 6%* 5%* 4% 3% 2% 4% 3% 2% 27%** 25%** 1% −2% −1% 14%** 3% 3% 2% 5% 4% 3% 3% 1% 1% 9%** 6%* 3% 0% 5%* 1% 0% −1% 0% 3% 4% 4% 3% 3% 2% 2% 4% 3% 2% 2%

* Denotes Clark–West statistic leads to rejection of the null hypothesis of no improvement in the forecast at the 5% level. ** Denotes rejection at 1% level.

as a group (last column). For example, we just fail to reject (p = 0.061) that α4 = α5 = · · · = α8 = 0 in the regression z1t = α0 +

8  j=1

αj zj,t −1 + ε1t ,

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

235

Table 3 In-sample Granger causality tests that last N − m principal components do not Granger-cause the first m for various values of m. Table entries report p-values. The first 7 columns report predictability of zjt , the jth principal component of Yt , on the basis of zm+1,t −1 , . . . , zN ,t −1 , while the last column reports predictability of the vector (z1t , . . . , zmt )′ on the basis of zm+1,t −1 , . . . , zN ,t −1 . All regressions include (z1,t −1 , . . . , zm,t −1 )′ and were estimated 1983:M1–2002:M7. Number of principal components

m m m m m * **

=3 =4 =5 =6 =7

Granger-causality tests 1st

2nd

3rd

4th

5th

6th

7th

System

0.0609 0.0340* 0.1493 0.3783 0.1675

0.1958 0.5368 0.4269 0.7817 0.6911

0.6889 0.5669 0.7404 0.6129 0.4241

– 0.0294* 0.5477 0.3961 0.2816

– – 0.0214* 0.0537 0.0817

– – – 0.0016** 0.0030**

– – – – 0.5170

0.0687 0.0150* 0.0276* 0.0089** 0.0050*

Denoting rejection at the 5% level. Denoting rejection at the 1% level.

Table 4 Out-of-sample Granger causality test that last N − m principal components do not Granger-cause the first m for various values of m. Table entries report percent improvement in MSE for the equation that includes last N − m principal components over the equation that does not. Table estimates represent out-of-sample improvement in MSE for the equation that includes zm+1,t −1 , . . . , zN ,t −1 over the equation that does not. The jth column reports predictability of zjt , the jth principal component of Yt . Principal components estimated 1983:M1–2002:M7 and evaluated using recursive regressions and out-of-sample forecasts for 2002:M8–2007:M7. Number of principal components

m m m m m

=3 =4 =5 =6 =7

Out-of-sample improvement in MSE 1st

2nd

3rd

4th

5th

6th

7th

7%* 4%* 6%* 3% 2%

−4% −2% −3%

−3% −2% −2% −2% −1%

– −2% −1% −2% −1%

– – −8% −5% 5%*

– – – −5% −2%

– – – – 2%*

0% 0%

* Denotes Clark–West statistic leads to rejection of the null hypothesis of no improvement in the forecast at the 5% level. ** Denotes rejection at 1% level.

(row 1, column 1) and likewise just fail to reject the joint hypothesis that {z1t , z2t , z3t } cannot be predicted on the basis of {zj,t −1 }8j=4 (row 1, last column). Notwithstanding, these tests are quite close to rejection, and one might wonder whether 3 principal components may not be enough to capture the dynamics. But an interesting thing happens when we let Y1t be a (4 × 1) vector corresponding to the first 4 principal components. As seen in the second row of Table 3, the evidence for statistical predictability is stronger when we use 4 principal components rather than 3. Indeed, we would also reject a specification using 5, 6, or even 7 principal components. Table 4 investigates the predictability of principal components out of sample.7 While the contribution of {z4,t −1 , . . . , z8,t −1 } is not quite statistically significantly helpful for forecasting z1t within sample (first row and column of Table 3), it is statistically significantly helpful out of sample (first row and column of Table 4). Indeed, for all but one choice of the number of principal components to use in constructing Y1t , there is at least one element of Y1t that can be forecast statistically significantly out of sample on the basis of Y2,t −1 . Why does the consistency with the data become even worse when we add more principal components? The assumption behind the ATSM was that, if we use enough principal components, we can capture the true factors, and whatever is left over is measurement or specification error, which was simply assumed to be white noise. But the feature in the data is that, even though the higher principal components are tiny, they are in fact still serially correlated. One can see this directly by looking at the vector autoregression for the elements of Y2t alone, Y2t = c2 + φ22 Y2,t −1 + ε2t . Suppose we let Y2t = (zm+1,t , zm+2,t , . . . , zNt )′ be the smallest principal components and test whether φ22 = 0, that is, test the

null hypothesis that Y2t is serially uncorrelated. This hypothesis turns out to be rejected at the 1% level for each choice of m = 3, 4, 5, 6, or 7. Moreover, cross-correlations between these smaller principal components are statistically significant, which explains why even though it may be hard to forecast {z1t , z2t , z3t } using {z4,t −1 , z5,t −1 , z6,t −1 , z7,t −1 , z8,t −1 }, it is in fact easier to forecast {z1t , z2t , z3t , z4t } using {z5,t −1 , z6,t −1 , z7,t −1 , z8,t −1 }. 3.3. Granger-causality tests: Y2 We turn next to testable implications of (16), which embodies two sets of constraints. The first is that the m linear combinations of Yt represented by Y1t are sufficient to capture all the contemporaneous correlations. Specifically, if ynt is any element of (n) the Ne = (N − m) dimensional vector Y2t and Y2t denotes the remaining Ne − 1 elements of Y2t , then in the regression (n)

ynt = c0 + c1′ Y1t + c2′ Y2t + unt ,

we should find c2 = 0. The first row of Table 5 reports in-sample p-values associated with the test of this null hypothesis when Y1t is specified as the 6-month, 2-year, and 10-year yields. For ynt the 3month yield, we fail to reject the null hypothesis (p = 0.139) that c2 = 0. However, for each of the 4 other yields in Y2t (namely, the 1 year, 3 year, 5 year, and 7 year), the null hypothesis is rejected at the 0.1% significance level, as reported in the remaining entries of the first row of Table 5. Subsequent rows of Table 5 report the analogous tests for every possible selection of 3 yields to include in Y1t . For every single choice, at least 4 of the resulting 5 elements in Y2t are predictable, at a significance level less than 1%, by some of the other yields in Y2t for both in-sample tests (Table 5) and out of sample (Table 6). Nor can this problem obviously be by making Y1t  solved  a higher-dimensional vector. For the

7 Note that we keep h the same for each r, that is, h is based on (20) for the i i original sample through T , so that for each T + r we are talking about forecasting the same variable.

(21)

8 4

= 70 possible 4-

dimensional vectors for Y1t , in every single case at least one of the elements of Y2t is predictable at the 0.1% significance level by the  other 3. For the

8 5

= 56 possible 5-dimensional vectors, all but 8

236

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

Table 5 In-sample tests of null hypothesis that contemporaneous values for Y2t do not help predict other elements of Y2t once Y1t is included in the regression for alternative specifications of Y1t . Table entries report p-values. Individual columns report predictability for individual elements of Y2t . Regressions estimated 1983:M1–2002:M7. Specification of Y1t

Ability to predict each element of Y2t 4th

5th

6th

7th

8th

6m, 2y, 10y 6m, 2y, 3m 6m, 2y, 1y 6m, 2y, 3y 6m, 2y, 5y 6m, 2y, 7y 6m, 10y, 3m 6m, 10y, 1y 6m, 10y, 3y 6m, 10y, 5y 6m, 10y, 7y 6m, 3m, 1y 6m, 3m, 3y 6m, 3m, 5y 6m, 3m, 7y 6m, 1y, 3y 6m, 1y, 5y 6m, 1y, 7y 6m, 3y, 5y 6m, 3y, 7y 6m, 5y, 7y 2y, 10y, 3m 2y, 10y, 1y 2y, 10y, 3y 2y, 10y, 5y 2y, 10y, 7y 2y, 3m, 1y 2y, 3m, 3y 2y, 3m, 5y 2y, 3m, 7y 2y, 1y, 3y 2y, 1y, 5y 2y, 1y, 7y 2y, 3y, 5y 2y, 3y, 7y 2y, 5y, 7y 10y, 3m, 1y 10y, 3m, 3y 10y, 3m, 5y 10y, 3m, 7y 10y, 1y, 3y 10y, 1y, 5y 10y, 1y, 7y 10y, 3y, 5y 10y, 3y, 7y 10y, 5y, 7y 3m, 1y, 3y 3m, 1y, 5y 3m, 1y, 7y 3m, 3y, 5y 3m, 3y, 7y 3m, 5y, 7y 1y, 3y, 5y 1y, 3y, 7y 1y, 5y, 7y 3y, 5y, 7y

0.139 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.009** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.064 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.080 0.053 0.037* 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000**

0.000** 0.000** 0.001** 0.038* 0.076 0.284 0.000** 0.001** 0.001** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.015* 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.007** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000**

0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.001** 0.001** 0.001** 0.000** 0.002** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000**

0.000** 0.000** 0.000** 0.000** 0.587 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.007** 0.000** 0.000** 0.001** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000**

0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.002** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.448 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.001** 0.000** 0.000** 0.003** 0.000** 0.000**

* **

Denotes rejection at the 5% level. Denotes rejection at the 1% level.

have at least one ynt for which the null hypothesis of no prediction is rejected at the 1% level. If we go to m = 6, of the 28 possible specifications of the 2-dimensional vector Y2t , for 15 of them we find evidence at the 5% level that one is predicted by the other. Note that when Y1t and Y2t consist of selected principal components, the elements are orthogonal by construction so that the specification would necessarily pass the above test.

Table 6 Out-of-sample tests of null hypothesis that contemporaneous values for Y2t do not help predict other elements of Y2t once Y1t is included in the regression for alternative specifications of Y1t . Table entries report percent improvement in MSE (n) ( n) for the equation that includes Y2t over the equation that does not for Y2t the elements of Y2t other than that on the left-hand side of the regression. Based on recursive regressions generating out-of-sample forecasts for 2002:M8–2007:M7. Specification of Y1t

6m, 2y, 10y 6m, 2y, 3m 6m, 2y, 1y 6m, 2y, 3y 6m, 2y, 5y 6m, 2y, 7y 6m, 10y, 3m 6m, 10y, 1y 6m, 10y, 3y 6m, 10y, 5y 6m, 10y, 7y 6m, 3m, 1y 6m, 3m, 3y 6m, 3m, 5y 6m, 3m, 7y 6m, 1y, 3y 6m, 1y, 5y 6m, 1y, 7y 6m, 3y, 5y 6m, 3y, 7y 6m, 5y, 7y 2y, 10y, 3m 2y, 10y, 1y 2y, 10y, 3y 2y, 10y, 5y 2y, 10y, 7y 2y, 3m, 1y 2y, 3m, 3y 2y, 3m, 5y 2y, 3m, 7y 2y, 1y, 3y 2y, 1y, 5y 2y, 1y, 7y 2y, 3y, 5y 2y, 3y, 7y 2y, 5y, 7y 10y, 3m, 1y 10y, 3m, 3y 10y, 3m, 5y 10y, 3m, 7y 10y, 1y, 3y 10y, 1y, 5y 10y, 1y, 7y 10y, 3y, 5y 10y, 3y, 7y 10y, 5y, 7y 3m, 1y, 3y 3m, 1y, 5y 3m, 1y, 7y 3m, 3y, 5y 3m, 3y, 7y 3m, 5y, 7y 1y, 3y, 5y 1y, 3y, 7y 1y, 5y, 7y 3y, 5y, 7y

Out-of-sample improvement in MSE 4th

5th

6th

7th

8th

36%** 98%** 98%** 92%** 69%** 29%** 98%** 96%** 47%** 88%** 96%** 98%** 71%** 95%** 97%** 74%** 93%** 95%** 8%** 30%** 91%** 79%** 69%** 94%** 96%** 97%** 16%** 67%** 75%** 75%** 56%** 66%** 71%** 94%** 94%** 96%** 13%** 85%** 88%** 92%** 76%** 70%** 71%** 98%** 98%** 99%** −3% 4%** 4%** 81%** 80%** 80%** 71%** 77%** 63%** 98%**

32%** −267% 19%** 22%** 28%** 27%** −17%** 1%* 45%** 49%** 56%** 99%** 97%** 88%** 64%** 97%** 86%** 56%** 63%** 22%** 46%** 73%** 76%** 87%** 90%** 92%** 98%** 92%** 71%** 36%** 91%** 65%** 17%** 69%** 30%** 35%** 96%** 69%** 93%** 98%** 17%** 85%** 93%** 76%** 80%** 96%** 73%** 93%** 95%** 46%** 55%** 92%** −3% 12%** 91%** 74%**

64%** 89%** 93%** 8%** 25%** 32%** 99%** 98%** 46%** 36%** 43%** 99%** −515% −155%** −73%** 11%** 4%** 1%* 37%** 34%** 26%** 75%** 54%** 76%** 85%** 87%** 92%** 57%** 67%** 69%** 71%** 74%** 75%** 86%** 85%** 89%** 98%** 83%** 86%** 91%** 80%** 78%** 78%** 93%** 94%** 95%** 97%** 86%** 59%** 63%** 25%** 39%** 64%** 16%** 49%** 20%**

68%** 98%** 98%** 80%** 6%* 48%** 94%** 92%** 28%** 84%** 97%** 99%** 94%** 95%** 97%** 95%** 93%** 96%** 33%** 43%** −1%** 74%** 60%** −17%* 43%** 73%** 98%** 81%** 29%** 59%** 82%** −6% 41%** 79%** 79%** 87%** 92%** 39%** 87%** 98%** 15%** 85%** 95%** 93%** 94%** 97%** 95%** 93%** 96%** 77%** 78%** 76%** 76%** 78%** 68%** 93%**

44%** 98%** 99%** 91%** 63%** 51%** 79%** 72%** 29%** 16%** 82%** 99%** 97%** 76%** 81%** 97%** 75%** 77%** 63%** 26%** 90%** 54%** 35%** 18%** 17%** 60%** 99%** 91%** 62%** 51%** 92%** 65%** 50%** 65%** 12%** 50%** 74%** 39%** 20%** 86%** 21%** 13%** 78%** 18%** 29%** 89%** 97%** 73%** 76%** 63%** 25%** 90%** 65%** 25%** 91%** 94%**

* Denotes Clark–West statistic leads to rejection of the null hypothesis of no improvement in the forecast at the 5% level. ** Denotes rejection at 1% level.

A separate implication of (16) is that, if we condition on the contemporaneous value of Y1t , lagged values of Yt −1 should be of no help in predicting the value of any element of Y2t . That is, in the regression ynt = c0 + c1′ Y1t + c2′ Yt −1 + unt ,

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242 Table 7 In-sample tests of null hypothesis that lagged Yt −1 does not help predict once m contemporaneous principal components are included in the regression. The row m, column j entry reports p-value for predicting the jth principal component zjt when the contemporaneous values of the first m principal components are included. Regressions estimated 1983:M1–2002:M7. Number of principal components

m m m m m

=3 =4 =5 =6 =7

Predictability tests 4th

5th

6th

0.000**

0.000** 0.000**

0.000** 0.000** 0.000** 0.000** 0.000** 0.000** 0.000**

7th

8th 0.000** 0.000** 0.000** 0.000** 0.000**

* Denotes rejection at 5% level. Denotes rejection at 1% level.

**

Table 8 Out-of-sample tests of null hypothesis that lagged Yt −1 does not help predict once m contemporaneous principal components are included in the regression. The row m, column j entry reports the percent improvement in MSE for predicting the jth principal component zjt when the contemporaneous values of the first m principal components are included. Based on recursive regressions generating out-of-sample forecasts for 2002:M8–2007:M7. Number of principal components

Predictability tests 4th

m m m m m

5th **

=3 =4 =5 =6 =7

75%

**

6% 11%**

6th

7th **

44% 44%** 41%**

8th **

65% 66%** 71%** 68%**

39%** 33%** 34%** 36%** 36%**

* Indicates that the Clark–West statistic leads to rejection of the null hypothesis of no improvement in the forecast at the 5% level. ** Denotes rejection at 1% level.

we should find that the 8 elements of c2 are all zero if ynt is any element of Y2t . For each of the 56 possible choices for the 3dimensional vector Y1t , this hypothesis ends up being rejected at the 1% level for each of the implied 5 elements of Y2t on the basis of both the in-sample F test and the out-of-sample Clark–West test. Using a higher-dimensional Y1t or principal components does not solve this problem. For example, let zjt denote the jth principal component and consider the regression zjt = c0 +

m 

c1i zit + c2′ Yt −1 + ujt

i=1

for some j > m. The first row of Table 7 shows that, for m = 3, we strongly reject the hypothesis that c2 = 0 for each j = 4, 5, 6, 7, 8. Subsequent rows show that the same is true for any choice of m. Table 8 confirms that the statistical contribution of Yt −1 to a forecast of any of the smaller principal components is statistically significant out of sample as well. Our conclusion from this and the preceding subsection is that the assumption that there exists a readily observed factor of any dimension that captures all the predictability of Yt is not consistent with the behavior of these data. At a minimum, a data-coherent specification requires the assumption that the measurement or specification error must be serially correlated. 3.4. Tests of predicted values for nonzero coefficients Up to this point we have been testing the large blocks of zero restrictions imposed by Eqs. (12) and (16) relative to an unrestricted VAR. We now consider the particular values predicted by an ATSM for the nonzero elements in these two equations. Duffee (2011a) used mean-squared-error comparisons to conclude that these nonlinear restrictions are typically rejected statistically. Here we use the minimum-chi-square approach to test overidentifying restrictions developed by Hamilton and Wu

237

(2012b). First we will develop some new extensions of those methods appropriate for the case in which the factors Ft are treated as directly observed in the sense that the value of B1 in (10) is known a priori; the alternative case of latent factors (that is, when B1 must be estimated) is discussed in Hamilton and Wu (2012b). Note that the tests described in Sections 3.2 and 3.3 are perfectly valid regardless of whether the factors are treated as latent or observed. ∗ ∗ The values of φ11 in (12) and φ21 in (16) are completely determined by the matrix ρ and the sequence {bn }, where the latter in turn can be calculated as functions of ρ Q and δ1 using (2) and (7). The resulting value for B1 , along with the structural parameters Σ and Σe , determine the variance–covariance matrix of the innovations in (12) and (16). The sequence {bn } and values of Σ , c Q , δ0 , c and ρ can be used to calculate the constants A∗1 and A∗2 in (12) and (16). Thus the likelihood function is fully specified by the structural parameters {c , ρ, c Q , ρ Q , δ1 , Σ , Σe , δ0 }. As discussed in Hamilton and Wu (2012b), some further normalization is necessary in order to be able to identify these structural parameters on the basis of observation of {Yt }Tt=1 . If we assume that m linear combinations of Yt are observed without error, Joslin et al. (2011) suggest that a natural normalization is to take the (m × 1) vector Ft to be given by these particular linear combinations, Ft = H1 Yt , for H1 a known (m × N ) matrix. For our base case specification in which Yt = (y3t , y6t , y12,t y24,t , y36,t , y60,t , y84,t , y120,t )′ and Y1t = (y6t , y24,t , y120,t )′ we would have 0 0 0

 H1 =

1 0 0

0 0 0

0 1 0

0 0 0

0 0 0

0 0 0

0 0 . 1



Premultiplying (9) by H1 , and substituting the condition Ft = H1 Yt gives H1 Yt = H1 A + H1 BH1 Yt , requiring H1 A = 0 and H1 B = Im . These conditions turn out to imply a normalization similar to that of Joslin et al. (2011) in which the (m×m) matrix ρ Q is known up to its eigenvalues and the vector c Q is a known function of those eigenvalues along with δ0 and Σ , as the following proposition demonstrates. Proposition 1. Let ξ = (ξ1 , . . . , ξm )′ denote a proposed vector of ordered eigenvalues of ρ Q . Let ι denote an (m × 1) vector of ones and H1 a known (m × N ) matrix. Define

γn (x) = n−1 (1×1)

n−1 

xj

j =0

γn1 (ξ1 )  γn1 (ξ2 ) K (ξ ) =   .. (m×N ) . 

γn2 (ξ1 ) γn2 (ξ2 ) .. .

γn (ξm ) γn2 (ξm )  1  ξ1 · · · 0 . ..  V (ξ ) =  .. · · · . (m×m) 0 · · · ξm

··· ··· ··· ···

 γnN (ξ1 ) γnN (ξ2 )  ..   .

γnN (ξm )

ρ Q ′ = [K (ξ )H1′ ]−1 [V (ξ )] [K (ξ )H1′ ]

(m×m)

δ1 = [K (ξ )H1′ ]−1 ι.

(m×1)

Then for bn constructed from (2) and (7) it is the case that



bn 1

···

bnN H1′ = Im .



(22)

238

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

ˆ 1∗ ) the m(m + 1)× 1 vector obtained by stacking columns for vec (Π

For given scalar δ0 and (m × m) matrix Σ if we further define

ζn (ξ ) = n

 −1

(1×m)

b′1 + 2b′2 + · · · + (n − 1) b′n−1

ψn (ξ , δ0 , Σ ) = δ0 − (2n)

ˆ 1∗ , and vech (Ω ˆ 1∗ ) the m(m+1)/2×1 vector from stacking those of Π



ˆ 1∗ that are on or below the principal diagonal. Also, elements in Ω g (θ ) is the vector of predicted values for π using the expressions in Section 3.1, while Rˆ is a matrix whose diagonal blocks are  ˆ 1∗−1 ⊗ Ω ˆ 1∗−1 )Dm , ˆ 1∗−1 ⊗T −1 Tt=1 x1t x′1t , (1/2)D′m (Ω given by Ω

b′1 ΣΣ ′ b1 + 22 b′2 ΣΣ ′ b2

 −1

(1×1)

 + · · · + (n − 1)2 b′n−1 ΣΣ ′ bn−1  −1    ψn1 (ξ , δ0 , Σ ) ζn1 (ξ )     .  .. c Q = − H1  ..  H1  , . (m×1) ψnN (ξ , δ0 , Σ ) ζnN (ξ )

(23)

then for an constructed from (4) and (8), it is the case that





an 1

  0

 .  . H1  ..  =  ..  . an N

0

Suppose we assume that the factors are directly observable in the form of some known linear combination Y1t = H1 Yt , and define those linear combinations observed with error to be Y2t = H2 Yt for H2 a known (Ne × N ) matrix with Ne = N − m. Then Proposition 1 establishes that the likelihood function of {Yt }Tt=1 can be parameterized in terms of {c , ρ, ξ , Σ , Σe , δ0 }. While the conventional approach to parameter estimation would be to choose these parameters so as to maximize the likelihood function directly, Hamilton and Wu (2012b) argue that there are substantial benefits from estimating by the minimum-chi-square procedure originally developed by Rothenberg (1973). The procedure is asymptotically equivalent to MLE but often substantially easier to implement. The approach is to first estimate the reduced-form parameters in (12) and (16) directly by ordinary least squares:



T

  ∗ = Y1t x′1t φˆ 11

 ˆ 1∗′ = Aˆ ∗ Π 1

 T 

t =1







x1t = 1

Y1,t −1

ˆ 1∗ = T −1 Ω

T  

x1t x1t

πˆ 2 =

 ˆ 1∗′ x1t Y1t − Π

∗ = φˆ 21



T 

Y2t x′2t

 T 

t =1

′ Y1t

x′2t = 1



ˆ 2∗ = T −1 Ω

′  −1

x2t x′2t

t =1



T  

ˆ 2∗′ x2t Y2t − Π



ˆ 2∗′ x2t Y2t − Π

′

.

 ′   θˆMCS = arg min T πˆ − g (θ ) Rˆ πˆ − g (θ ) . θ

(24)

Here πˆ is the vector of reduced-form parameters,

′  ′ ˆ 1∗ ) , , vech(Ω

ˆ 1∗ ) vec(Π





(26)

′  ′ ′ ∗ ∗ ˆ ˆ vech(Ω1 ) , vec(Π2 )

0

The minimum-chi-square approach is to let these simple closed-form OLS formulas do the job of maximizing the unrestricted likelihood for {Y1 , . . . , YT |Y0 }, and then find estimates of the structural parameters {c , ρ, ξ , Σ , Σe , δ0 } whose predicted values for these reduced-form coefficients are as close as possible to the OLS estimates. Closeness is defined in terms of minimizing a quadratic form with weighting matrix given by a consistent estimate of the information matrix:







 ˆ 1∗−1 ⊗ Ω ˆ 1∗−1 )Dm (1/2)D′m (Ω  Rˆ 2 = 

t =1

πˆ =

′



0

ˆ 2∗−1 ⊗ T −1 Ω

T 

x2t x′2t

 .

t =1

 ˆ 2∗′ = Aˆ ∗ Π 2

∗ choose ρˆ so as to match φˆ 11 exactly, so that the first block of πˆ contributes zero to the objective function (24).8 Thus the numerical component of MCS estimation amounts to choosing {ξ , Σ , δ0 } so as to minimize



t =1



ˆ e set to zero, and again with no consequences for elements of Σ other parameter estimates. Similarly, no matter what values might be chosen for the other parameters, as long as B1 is invertible, from Eq. (13) we can always choose cˆ so as to match Aˆ ∗1 exactly, and from (14) we can





T

T πˆ 2 − g2 (θ ) Rˆ 2 πˆ 2 − g2 (θ )

 −1

t =1

ˆ 1∗′ x1t Y1t − Π

′ ′ ˆ ∗−1 ⊗ Ω ˆ 2∗−1 )DNe , and t =1 x2t x2t , and (1/2)DNe (Ω2 whose other elements are all zero, and where Dm denotes the m2 × m(m + 1)/2 duplication matrix satisfying Dm vech (Ω ) = vec(Ω ). Note that since the information matrix is block diagonal with respect to the elements of Ω2∗ , and since Ω2∗ are the only reducedform parameters affected by the measurement error parameters Σe , MCSE for the latter can be obtained directly from the OLS ˆ 2∗ , namely Σ ˆ eΣ ˆ e′ = Ω ˆ 2∗ , and this does not affect estimates Ω estimates of any other structural parameters. Moreover, this result still holds even when restrictions are imposed on Σe . For example, for the usual specification in which the measurement error is taken to be contemporaneously uncorrelated, the MCSE is obtained ˆ e equal to the square roots of by setting diagonal elements of Σ ˆ 2∗ , with off-diagonal the corresponding diagonal elements of Ω

ˆ 2∗−1 ⊗T −1 Ω

′  ′ ′ ∗ ∗ ˆ ˆ , vec(Π2 ) , vech(Ω2 )

(25)

In addition to being asymptotically equivalent to and often easier to compute than the MLE, minimum-chi-square estimation has the further benefit that the optimized value for the objective function (26) has an asymptotic χ 2 distribution with degrees of freedom given by the number of overidentifying restrictions. Hence an immediate by-product of the estimation is an evaluation of the validity of the kinds of restrictions considered in this section. There ˆ 1∗ and (N − m)(m + 1) elements are m(m + 1)/2 elements in Ω

ˆ 2∗ , or 26 parameters in the unrestricted reduced form for the in Π case when m = 3 and N = 8. On the other hand, there are m elements in ξ , m(m + 1)/2 elements in Σ , and 1 element in δ0 , or 10 structural parameters for the above example. The model then imposes 16 overidentifying restrictions, or particular ways in which the parameters in regressions of the elements of Y2t on a constant and Y1t should be related to each other and related to the residual variance–covariance matrix for a VAR(1) for Y1t itself. We first apply this procedure to our base-case specification in which m = 3 and Y1t is taken to be the 6-month, 2-year, and 10-year yields. The resulting χ 2 (16) statistic is 633.58, leading to overwhelming rejection of the null hypothesis that the ATSM restrictions are consistent with the data. The procedure also

8 Joslin et al. (2011) derived a similar result for maximum likelihood estimation.

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

provides an immediate check on which elements of πˆ 2 are most at odds with the predictions implied by g2 (θˆ2 ). The biggest positive contributions to (26) come from the constant terms Aˆ ∗2 . This claim might be surprising to many researchers, since it is often asserted that a standard ATSM does a good job of capturing the cross-section distribution of returns, precisely the claim being tested by the above χ 2 test. The usual basis for the claim is the observation that 3 linear combinations of yields can account for an overwhelming fraction of the variances and covariances of yields. However, the high R2 from such regressions only summarize the comovements between the variables as distinct from their individual average levels. The ATSM also has testable implications for the latter, which we have just seen are inconsistent with the values observed in the data. We can consider relaxing this feature of the ATSM by adding to each an an unrestricted constant kn . This causes the parameter δ0 to be no longer identified, in effect replacing the original single parameter δ0 for purposes of describing the average values of the different yields with N − m new constants. The minimum value for (26) achieved by choice of {ξ , Σ , km+1 , . . . , kN } turns out to be 132.75. Although this is a substantial improvement over the original specification, it is still grossly inconsistent with a χ 2 (12) distribution. Although the MCS χ 2 statistic is not directly testing the separate zero restrictions that we investigated earlier, some of those restrictions are maintained auxiliary assumptions that can influence the outcome of the χ 2 test. In particular, we saw above that there is very strong evidence that the error term in the Y2t regression is serially correlated. We now investigate MCS estimation of an ATSM when this restriction is relaxed. ∗ Suppose that (16) holds, with φ21 given by the structural −1 ∗ parameters B2 B1 but A2 unrestricted and the error term correlated with lagged yields: u2t = ψ2 Yt −1 + ε2t .

(27)

Substituting (27) into (16) results in

Ď

Ď

′

Ď

where πˆ 2

=

Ď



Ď



Ď

Rˆ 2 πˆ 2 − g2 (θ )



(28)

′  ′ ′ ˆ 2Ď ) , vec(Π , xĎ2t′

ˆ 1∗ ) vech(Ω

=



1

′ Y1t



Yt′−1 , and

 Ď

ˆ 1∗−1 ⊗ Ω ˆ 1∗−1 )Dm (1/2)D′m (Ω

Rˆ 2 = 



0

0

ˆ 2Ď−1 ⊗ T −1 Ω

T 

Ď

Ď′ 

x2t x2t

ˆ 2Ď = T −1 Ω

T  

9 Implementing this turns out to be quite simple, since with AĎ unrestricted, 2

Ď′ Ď

ˆ 2 x2t Y2t − Π

′

.

+ ρoℓ ftℓ−1 + Σoo uot o ℓ 1 f t −1

+ ρℓℓ ftℓ−1 +

(29)



+ ··· + ρ .

o ℓ 2 f t −2 o Σℓo ut Σℓℓ uℓt

+

o ℓk ft −k

(30)

ˆ 1∗ . Recall also Ω

B1 (ξ ) = Im . Moreover, given ξ we can calculate Y˜2t (ξ ) = Y2t − B2 (ξ )Y1t

        T   −1 1 T ˜ 1 Yt′−1 1 Yt′−1 ψ˜ 2 (ξ ) = t =1 Y2t (ξ ) t =1 Y t −1  ′  from which g2 (ξ ) = vec A˜ 2 (ξ ) and (28) need only be B2 (ξ ) ψ˜ 2 (ξ ) minimized with respect to the 3 elements of ξ . 



4. ATSM with observable macroeconomic factors

ft = cℓ + ρ

and A˜ 2 (ξ )

Ď′ Ď

ˆ 2 x2t Y2t − Π

For this case, there are m(m + 1)/2 + Ne (1 + m + N ) = 66 unrestricted reduced-form parameters and m + m(m + 1)/2 + Ne (N + 1) = 54 structural parameters for 12 overidentifying restrictions. The χ 2 (12) statistic turns out to be 78.52, which still leads to strong rejection. One could relax additional restrictions to try to arrive at a specification that is not rejected. However, even if a specification were found that is consistent with the observed value for Π2 , the model would still have to contend with rejection of the many separate zero restrictions documented above. Based on those earlier tests, the most promising specification was when Y1t corresponds to the first 3 principal components, that is, Y1t = H1 Yt for rows of H1 corresponding to the first three eigenvectors of (20), and Y2t the remaining 5 principal components. When we calculate the MCS statistic (26) for the original specification, we arrive at a χ 2 (16) statistic of 650.47. Relaxing the constraint on the intercepts by introducing the km+1 , . . . , kN parameters brings this down to χ 2 (12) = 145.05. Allowing for serial correlation in u2t yields a χ 2 (12) statistic of 13.48 (p = 0.335), fully consistent with the data. We conclude that representing the term structure factors by the first 3 principal components offers more promise of fitting the data than using any subset of m yields. However, it is necessary to acknowledge that the measurement or specification error is serially correlated. One furthermore needs to relax the predictions of the ATSM for the average levels of the various yields in order to describe accurately what is found in the data.



=

Ď′

t =1

t =1

ˆΣ ˆ′ Σ is unrestricted and the MCSE for Σ satisfies Σ

Ď

x2t x2t

t =1

fto = co + ρo1 fto−1 + ρo2 fto−2 + · · · + ρok fto−k

whose unrestricted estimates are again easily obtained by OLS. We Ď Ď then choose {ξ , Σ , A2 , ψ2 } so as to minimize9



Y2t x2t

t =1



Ď

Y2t = A2 + ψ1 Y1t + ψ2 Yt −1 + ε2t

T πˆ 2 − g2 (θ )

T 

 −1



for which the corresponding unrestricted reduced form is Ď

ˆ 2Ď′ = Π

239

 T  Ď′

Up to this point we have been discussing models in which the only data being used are the yields themselves. There is a substantial literature beginning with Ang and Piazzesi (2003) that also incorporates directly observable macroeconomic variables such as output growth and inflation, collected in a vector fto . In our empirical investigation of these models, we will take fto to be a (2 × 1) vector whose first element is the monthly Chicago Fed National Activity Index and second element is the percentage change from the previous year in the implicit price deflator for personal consumption expenditures from the FRED database of the Federal Reserve Bank of St. Louis. These observable macro factors fto are then thought to supplement an (m × 1) vector of conventional yield factors ftℓ in jointly determining the behavior of bond yields. The standard assumption is that the P-measure dynamics of the factors could be described with a VAR10 :

Ď

1 Y2t = A2 + B2 B− 1 Y1t + ψ2 Yt −1 + ε2t

Ď



10 The fact that only a single lag on f ℓ is used is without loss of generality. If t ftℓ is a latent vector, one could always stack a higher-order system for these latent variables into companion form, as we do below with the observed macro factors. However, if one wanted to take this interpretation of the dimension of ftℓ literally, one would want to impose corresponding additional restrictions on ρ .

240

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

Defining Fto = (fto′ , fto−′ 1 , . . . , fto−′ k+1 )′ , we can interpret (29)–(30) as an alternative formulation of (1) where Ft is now the (2k + m) vector Ft = (Fto′ , ftℓ′ )′ ,

 ρ

(2k+m)×(2k+m)

   =   

ρo1

ρo2

I2 0

0 I2

.. .

0

ρℓ1

.. .

0

ρℓ2

··· ··· ··· .. . ··· ···

= (co′ , 0′ , . . . , 0′ , cℓ′ )′  Σoo 0 0 0 0  0  0 0 0  Σ(2k+m)×(2k+m) =  .. ..  ... . . Σℓo 0 0

ρo,k−1

ρok

0 0

0 0

.. .

.. .

I2

ρℓ,k−1

0

ρℓk

ρoℓ



0   0 

.. .

0

ρℓℓ

   

Table 9 In-sample comparison of macro-finance models with different independence and lag length assumptions. First column reports likelihood ratio tests (p-value in parentheses) for testing indicated row against the first row. AIC = Akaike Information Criterion, and BIC = Schwarz Criterion, with bold indicating the preferred specification by that criterion. Regressions estimated 1983:M1–2002:M7. Lag length

Interaction

Likelihood ratio test

AIC

BIC

k = 12 k = 12

Dependent Independent



~ 2 (6) = 15.9

−3094 −3090

−2038 −2054

−3090

−2783

−3080

−2794

k=1 k=1

c

Dependent

~ (220) = 442.3265

Independent

~ (226) = 463.6942

··· ··· ··· .. . ···

*

0 0  0  . 



**

..  . Σℓℓ

Elements of the (m + 2k) × 1 vectors λ and δ1 and of the (m + 2k) × (m + 2k) matrix Λ corresponding to zero blocks of Σ are set to zero. We can then calculate predicted yields using (2) through (6) as before. Among the choices to be made are the dimension of the latent vector (m), number of lags to summarize macro dynamics (k), and whether the macro factors and latent factors can be regarded as independent (as represented by the restrictions ρoℓ = 0, ρℓ1 = · · · = ρℓk = 0, and Σℓo = 0). Pericoli and Taboga (2008) conducted comprehensive investigations of this question through the arduous process of estimating assorted specifications subject to the full set of nonlinear restrictions imposed by the theory. Once again, however, it is possible to use Granger’s suggestion of choosing among the possible specifications on the basis of extremely simple tests of the underlying forecasting relations, as we now illustrate. Suppose as in (10) that there is an (m × 1) vector of yields Y1t for which the predicted pricing relations hold exactly, and as in (11) that there is an (Ne × 1) vector Y2t priced with error. Then similar algebra to that used earlier produces the reduced form implied by the system: fto

∗ ∗ = A∗m + φoo Fto−1 + φo1 Y1,t −1 + u∗ot

(31)

Y1t

∗ ∗ ∗ = A∗1 + φ1o Fto−1 + φ11 Y1,t −1 + ψ1o fto + u∗1t

(32)

Y2t

∗ ∗ = A∗2 + φ2o Fto + φ21 Y1t + u∗2t .

(33)

(m×1) (Ne ×1)

(2×2k)

(m×2k)

(Ne ×2k)

2

(p=0.0000)**

(p=0.0000)**

(2k+m)×1

(2×1)

(p=0.0141)* 2

(2×m)

(m×m)

(m×2)

(Ne ×m)

If the macro and finance factors are independent, then the ∗ coefficient φo1 in (31) must be zero. Thus an immediate testable implication of independence of the macro and latent factors is whether the yields in Y1t Granger-cause the observed macro factors. Furthermore, the choice of k ends up determining the number of lags of fto−j that are helpful for forecasting fto , Y1t , and Y2t ∗ ∗ ∗ , and φ2o in (31) through (33)). All of these (dimensions of φoo , φ1o can be tested by simple OLS without having to estimate the ATSM at all. To illustrate this possibility, we focus on the choice in lag length between k = 1 or k = 12 and on whether one wants to model the latent factors and macro factors as independent. We further specify that m = 3 and that the 6-month, 2-year, and 10-year securities are priced without error. Row 2 of Table 9 indicates that we would reject the null hypothesis of independence under the maintained assumption of 12 lags, while row 3 indicates we would reject the null hypothesis that only 1 lag is needed under the maintained assumption of dependence.

Denotes rejection at 5% level. Denotes rejection at 1% level.

Despite the superior in-sample fit, the least restrictive specification in row 1 of Table 9 is richly parameterized, with 28–30 regression coefficients estimated per equation. While the model selection criterion11 suggested by Akaike reaches the same conclusion as the in-sample F test, the Schwarz criterion favors the most parsimonious specification with k = 1 and independence of the macro and latent factors. Table 10 reinforces this conclusion from Schwarz, finding that the out-of-sample, one-month-ahead forecast of yields generated by the k = 1 specifications always beat k = 12. On the other hand, a specification that allows dependence between the macro and latent factors usually dominates the independent specification in terms of out-of-sample performance. These results suggest that a parsimonious 1-lag specification that still allows for interaction between the factors might be preferred. 5. Conclusion A number of previous researchers have discussed related shortcomings of ATSM. Cochrane and Piazzesi (2009) documented that the linear combinations that describe the contemporaneous correlations among yields are different from those that are most helpful for forecasting. Collin-Dufresne and Goldstein (2002) found that lagged volatilities as well as lagged levels of yields contribute to forecasts, while Ludvigson and Ng (2011), Cooper and Priestly (2009), and Joslin et al. (2010) concluded that macro variables have useful forecasting information beyond that contained in current yields. Duffee (2011b) suggested that these results could be explained by near-cancellation of the forecasting and risk-pricing implications of certain factors, causing these factors to be hidden from any collection of contemporaneous yields and yet still useful for forecasting future yields. However, the results in our paper go beyond any of these claims. We find that for Y1t a collection of m yields or principal components and Y2t the remaining yields or components, the data consistently reject the hypothesis that Y2 does not Grangercause Y1 , regardless of how large one makes m, and further reject the hypothesis that the residuals from a regression of Y2t on Y1t are serially uncorrelated. These results could not be attributed to hidden or omitted factors in the sense of Duffee (2011b) or Collin-Dufresne and Goldstein (2002), since our explanatory variables are direct functions of the yields themselves. Instead we find that the data speak conclusively that the specification or measurement error in the system must have its own important dynamic structure. As noted by Duffee (2011a,b), the specification error could be broadly attributed to factors such as bid/ask spreads, preferred habitats of particular investors, interpolation errors, and liquidity

11 See for example Lütkepohl (1993), p. 202.

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

241

Table 10 Post-sample comparison of macro-finance models with different independence and lag length assumptions. Table entry is out-of-sample MSE for one-month-ahead forecast of the indicated yield on the basis of the indicated specification, with bold indicating the best out-of-sample performance for that variable. Based on recursive regressions generating out-of-sample forecasts for 2002:M8–2007:M7. Lag length k k k k

= 12 = 12 =1 =1

Interaction

6m

2y

10y

3m

1y

3y

5y

7y

Dependent Independent Dependent Independent

0.025 0.026 0.013 0.015

0.077 0.077 0.054 0.059

0.092 0.092 0.078 0.082

0.038 0.040 0.027 0.028

0.035 0.035 0.024 0.023

0.095 0.094 0.073 0.079

0.104 0.104 0.088 0.093

0.099 0.099 0.088 0.092

premia. None of these factors would a priori be expected to be white noise, and it should not be surprising that we find the measurement error terms in these models to be quite predictable. Furthermore, it is not a defense to argue that this serial correlation can be ignored because the errors themselves are small—this form of model misspecification makes conventional standard errors unreliable and invalidates standard hypothesis tests about any parameters of the system. In this paper, we suggested one approach to dealing with these problems, which is to postulate as a primitive that the specification errors have their own mean and serial dependence structure, and estimate these separately from the parameters of the core ATSM. We illustrated estimation of a system of this form that seems to be consistent with the data. A more satisfactory approach would be to try to understand the features of these specification errors in a more structural way, for example, trying to model liquidity effects directly. This seems a particularly important task if one’s goal is to understand the behavior of the term structure during the financial crisis in the fall of 2008, for which Gürkaynak and Wright (2012) showed that even the most basic arbitrage relations appeared to break down. Apart from these issues, our paper illustrates that many of the key underlying assumptions of ATSM are trivially easy to test. Clive Granger’s perennial question of whether the model’s specification is consistent with basic forecasting relations in the data seems a particularly helpful guide for research using ATSM. Appendix Proof of Proposition 1. Observe that





   2  n−1 b n = n− 1 I m + ρ Q ′ + ρ Q ′ + · · · + ρ Q ′ δ1  Q ′ s ρ = [K (ξ )H1′ ]−1 [V (ξ )]s [K (ξ )H1′ ]  s  ξ1 · · · 0 . . [V (ξ )]s =  .. · · · .. 

0 · · · ξms    bn = n−1 [K (ξ )H1′ ]−1 Im + V (ξ ) + V (ξ )2 + · · · + V (ξ )n−1  × [K (ξ )H1′ ] [K (ξ )H1′ ]−1 ι   γn (ξ1 ) · · · 0  ..  ι = [K (ξ )H1′ ]−1  ... .  ··· 0 · · · γn (ξm )   γn (ξ1 )   = [K (ξ )H1′ ]−1  ... 

γn (ξm )



bn1

···





bnN H1

γn1 (ξ1 ) ′ −1  = [K (ξ )H1 ]  ... γn1 (ξm )   − 1 = K (ξ )H1′ K (ξ )H1′ = Im . 

··· ···

 γnN (ξ1 ) ..  H ′ .  1

γnN (ξm )

Furthermore, for an satisfying (4) and (8) and c Q satisfying (23),

   ζn1 (ξ ) ψn1 (ξ , δ0 , Σ )  .  Q    .  .. H1  ..  = H1   + H1  ..  c . ζnN (ξ ) ψnN (ξ , δ0 , Σ ) an N     ζn1 (ξ ) ψn1 (ξ , δ0 , Σ )  .    .. = H1   − H1  ..  . 

an 1





ζnN (ξ ) ψnN (ξ , δ0 , Σ )  −1   ζn1 (ξ ) ψn1 (ξ , δ0 , Σ )      .. × H1  ...  H1   . 

ζnN (ξ )

ψnN (ξ , δ0 , Σ )

  0

  =  ...  . 0

References Ang, Andrew, Piazzesi, Monika, 2003. A no-arbitrage vector autoregression of term structure dynamics with macroeconomic and latent variables. Journal of Monetary Economics 50, 745–787. Bauer, Michael D., 2011. Term Premia and the News, Federal Reserve Bank of San Francisco, Working paper. Beechey, Meredith J., Wright, Jonathan H., 2009. The high-frequency impact of news on long-term yields and forward rates: is it real? Journal of Monetary Economics 56, 535–544. Chen, Ren-Raw, Scott, Louis, 1993. Maximum likelihood estimation for a multifactor equilibrium model of the term structure of interest rates. The Journal of Fixed Income 3, 14–31. Christensen, Jens H.E., Diebold, Francis X., Rudebusch, Glenn D., 2011. The affine arbitrage-free class of Nelson–Siegel term structure models. Journal of Econometrics 164 (1), 4–20. Christensen, Jens H.E., Lopez, Jose A., Rudebusch, Glenn D., 2009. Do central bank liquidity facilities affect interbank lending rates? Working paper 2009–13, Federal Reserve Bank of San Francisco. Christensen, Jens H.E., Lopez, Jose A., Rudebusch, Glenn D., 2010. Inflation expectations and risk premiums in an arbitrage-free model of nominal and real bond yields. Journal of Money, Credit, and Banking 42, 143–178. Clark, Todd E., West, Kenneth D., 2007. Approximately normal tests for equal predictive accuracy in nested models. Journal of Econometrics 138, 291–311. Cochrane, John H., Piazzesi, Monika, 2009. Decomposing the Yield Curve, AFA 2010 Atlanta Meetings Paper. Collin-Dufresne, Pierre, Goldstein, Robert S., 2002. Do bonds span the fixed income markets? Theory and evidence for unspanned stochastic volatility. Journal of Finance 57 (4), 1685–1730. Cooper, Ilan, Priestly, Richard, 2009. Time-varying risk premiums and the output gap. Review of Financial Studies 22, 2801–2833. Dai, Qiang, Singleton, Kenneth J., 2000. Specification analysis of affine term structure models. The Journal of Finance 55, 1943–1978. Duffee, Gregory R., 2002. Term premia and interest rate forecasts in affine models. The Journal of Finance 57, 405–443. Duffee, Gregory R., 2011a. Forecasting with the term structure: the role of noarbitrage restrictions, Working Paper, Johns Hopkins University. Duffee, Gregory R., 2011b. Information in (and not in) the term structure. Review of Financial Studies 24 (9), 2895–2934. Duffie, D., Pan, J., Singleton, K., 2000. Transform analysis and asset pricing for affine jump-diffusions. Econometrica 68 (6), 1343–1376. Granger, Clive W.J., 1969. Investigating causal relations by econometric models and cross-spectral methods. Econometrica 37, 424–438. Granger, Clive W.J., 1980. Testing for causality: a personal viewpoint. Journal of Economic Dynamics and Control 2, 329–352. Gürkaynak, Refet S., Wright, Jonathan H., 2012. Macroeconomics and the term structure. Journal of Economic Literature 50, 331–367.

242

J.D. Hamilton, J.C. Wu / Journal of Econometrics 178 (2014) 231–242

Gürkaynak, Refet S., Sack, Brian, Wright, Jonathan H., 2007. The US treasury yield curve: 1961 to the present. Journal of Monetary Economics 54 (8), 2291–2304. Hamilton, James D., 1994. Time Series Analysis. Princeton University Press, Princeton, New Jersey. Hamilton, James D., Wu, Jing Cynthia, 2012a. The effectiveness of alternative monetary policy tools in a zero lower bound environment. Journal of Money, Credit, and Banking 44 (s1), 3–46. Hamilton, James D., Wu, Jing Cynthia, 2012b. Identification and estimation of Gaussian affine term structure models. Journal of Econometrics 168, 315–331. Hong, Yongmiao, Li, Haitao, 2005. Nonparametric specification testing for continuous-time models with applications to term structure of interest rates. Review of Financial Studies 18, 37–84. Joslin, Scott, Singleton, Kenneth J., Zhu, Haoxiang, 2011. A new perspective on gaussian dynamic term structure models. Review of Financial Studies 27, 926–970. Joslin, Scott, Priebsch, Marcel, Singleton, Kenneth J., 2010. Risk premium accounting in dynamic term structure models with unspanned macro risks, Working paper, Stanford.

Ludvigson, Sidney C., Ng, Serena, 2011. A factor analysis of bond risk premia. In: Ulah, A., Giles, D. (Eds.), Handbook of Empirical Economics and Finance. Chapman and Hall, pp. 313–372. Lütkepohl, Helmut, 1993. Introduction to Multiple Time Series Analysis. SpringerVerlag, Berlin. Pericoli, Marcello, Taboga, Marco, 2008. Canonical term-structure models with observable factors and the dynamics of bond risk premia. Journal of Money, Credit and Banking 40, 1471–1488. Rothenberg, Thomas J., 1973. Efficient Estimation with A Priori Information. Yale University Press. Rudebusch, Glenn D., 2010. Macro-finance models of interest rates and the economy. The Manchester School 25–52 (Supplement). Rudebusch, Glenn D., Wu, Tao, 2008. A macro-finance model of the term structure, monetary policy and the economy. The Economic Journal 118, 906–926. Rudebusch, Glenn D., Swanson, Eric T., Wu, Tao, 2006. The bond yield ‘conundrum’ from a macro-finance perspective. Monetary and Economic Studies 83–128 (Special Edition). Smith, Josephine M., 2010. The term structure of money market spreads during the financial crisis. Ph.D. Dissertation, Stanford University.

Testable implications of affine term structure models

Sep 5, 2013 - a Department of Economics, University of California, San Diego, United States b Booth School of Business, University of Chicago, United States.

471KB Sizes 2 Downloads 261 Views

Recommend Documents

Testable implications of affine term structure models
Sep 5, 2013 - and Piazzesi, 2009), studying the effect of macroeconomic devel- opments ... an excellent illustration of Granger's (1969) proposal that testing.

Estimation of affine term structure models with spanned
of Canada, Kansas, UMass, and Chicago Booth Junior Finance Symposium for helpful ... University of Chicago Booth School of Business for financial support.

Estimation of affine term structure models with spanned - Chicago Booth
also gratefully acknowledges financial support from the IBM Faculty Research Fund at the University of Chicago Booth School of Business. This paper was formerly titled. ''Estimation of non-Gaussian affine term structure models''. ∗. Corresponding a

Affine term structure models for the foreign exchange ...
Email: [email protected]. .... First, it is currently the best-understood, having been ...... It is interesting to notice that the bulk of the decrease.

Testable implications of general equilibrium theory: a ...
finite sets of data, and, recently, by Chiappori and Ekeland (1999a) for analytic demand functions. In all cases, the ... Sonnenschein–Debreu–Mantel (SDM) result has strong implications for the convergence of tâtonnement ...... CentER, the Unive

Discrete-time AffineQ Term Structure Models with ...
develop an equilibrium, nonlinear term structure model in which agents ... market prices of risk that preserve the affine structure under P (see, e.g., Dai and ...

Why Gaussian macro-finance term structure models are
sional factor-structure in which the risk factors are both ..... errors for. Measurement errors for yield factors macro-variables. TSf. X. X. TSn. X. FVf. X. FVn. TSfm. X.

Internationally Affi ne Term Structure Models
Keywords: Term structure, Interest rates, Exchange rates. .... The result in this proposition is novel because (to the best of our knowledge) the literature on ...

Identification and estimation of Gaussian affine term ...
Feb 3, 2012 - We will use for our illustration a Q representation for this system. Dai and ..... one would draw from Local 53 in Table 1 are fundamentally flawed ..... (50). Y2 t. (2×1). = A∗. 2+ φ∗. 2m. (2×24). Fm t. + φ∗. 21. (2×3). Y1 t

Affine Models of Currency Pricing: Accounting for the ...
Jul 10, 1998 - It has been accepted for inclusion in Tepper School of Business by an authorized administrator ... Accounting for the Forward Premium Anomaly*. David Backus .... nism of the uropeanv onetary System. In fact, the ... suggests that risk

The Term Structure of VIX
Jin E. Zhang is an Associate Professor at the School of Economics and Finance, ... Published online August 16, 2012 in Wiley Online Library ... a 30-day VIX directly is not a good idea because it says nothing about the ... 1As an example, the open in

Environmental Implications of Market Structure: Shale ...
Aug 10, 2017 - Economics and Policy, the 2014 NBER Environmental and Energy Economics Summer Institute for very helpful comments ... implications for carbon dioxide emissions.2 .... Importantly, gas is a superior alternative to coal in terms of carbo

Implications of life history for genetic structure and ...
Nov 11, 2005 - of low river Xow, and recruitment of species that require access to the ...... 3.0: an inte- grated software package for population genetics data analysis. .... brachyuran crabs and implications for tidal inlet management. Wetlands ...

Implications of life history for genetic structure and ...
Nov 11, 2005 - brates with three main types of larval development: (1) dispersal ...... uthern. African co astal in verteb rate sp ecies. R esu lts o f no n-sign ifi can.

Automatic Affine Structure Recovery Using RANSAC
sented by a 6 degrees of freedom 4 4 matrix,. 3 for rotation and 3 for .... a good idea to normalize the 3D points so that .... Notes in Computer Science, 2018:144–.

Switched affine models for describing nonlinear systems
In comparison with the batch mode methods mentioned above, it is fair to say that our method, ..... [4] G. Ferrari-Trecate, M. Muselli, D. Liberati, and. M. Morari, “A ...

Animal models of long-term consequences of early exposure to ...
issues related to animal studies of the long-term consequences of early exposure to repetitive pain so that the studies are comprehensible and can be critiqued for relevance to clinical situations. It is well documented that neonates and infants in n

Animal models of long-term consequences of early exposure to ...
neonatal intensive care units (NICUs) experience repeated painful events ... There are also emerging data that indicate there may be long-term consequences.

News Shocks and the Term Structure of Interest Rates: Reply
news shocks about future productivity for business cycle fluctuations. ... Avenue, Columbia, MO 65211 and Federal Reserve Bank of St. Louis (e-mail: ... (2011), the news shock is identified as the innovation that accounts for the MFEV of.

McCallum Rules, Exchange Rates, and the Term Structure of Interest ...
etary actions of the central bank, and the entire term structure of interest rates can be used .... is known as the forward premium puzzle and it implies that high domestic interest rates .... account for the fact that agents are not risk neutral.

Monetary Policy Regimes and the Term Structure of ...
∗Corresponding author: London School of Economics, Department of Finance, Houghton Street, ... Email addresses: [email protected] (Ruslan Bikbov), ...

Monetary Policy Regimes and The Term Structure of ...
Mikhail Chernov, London Business School and CEPR. CREST. February 2009 ... What are the economic forces driving regime switches? – Monetary policy ...