Max. Marks: 80 Answer any FIVE questions All questions carry equal marks ---
.in
Time: 3 Hours
Discuss the importance of design and material selection in corrosion control. Distinguish between dry corrosion and wet corrosion.
2.a) b)
What are the constituents of paint? Mention their functions. Write a note on vitreous enamels.
3.a) b)
How is aluminium anodized? What are the applications of such coatings. What is caustic embrittlement.
4.a) b)
How are the following polymers obtained? PVC, Teflon and polymethacrylate. Define the following terms with one example each (i) Monomer (ii) Degree of polymerisation.
5.a)
What are the troubles introduced by the use of hard water in a boiler. Explain the reasons. Write the requirements of a good drinking water.
6.a) b)
With a neat diagram explain the ion exchange process for the purification of water. Derive the relationship between parts per million and milligram per litre. How does tricalcium silicate react with water? Write the corresponding equation. What is Portland cement? Why is it called so? Give its composition.
nt
7.a) b)
uW
b)
or ld
1.a) b)
What are refractories? How are they classified. Give examples. What is meant by thermal spalling? How is it reduced?
Max. Marks: 80 Answer any FIVE questions All questions carry equal marks ---
.in
Time: 3 Hours
Give one example of chemical corrosion and electrochemical corrosion and explain the mechanism.
2.a)
Explain the protective coatings you would choose for; steel; cast Iron and concrete pipe. Give reasons for your answer. Write a note on Distempers.
b) 3.a)
b)
or ld
1.
Discuss the corrosion occurring in the following: (i) Crack in the metal (ii) Wire fence. (iii) Rivetted joints. What is meant by phosphating of steel?
Distinguish between thermoplastics and thermosetting plastics. Explain the term vulcanisation.
5.a) b)
Give an account of fabrication of plastics by injection moulding. Classify the following into thermoplastics and thermosetting plastics. (i) Cellulose acetate. (ii) Nylon 6,6. (iii) Bakelite. (iv) PVC.
6.a) b)
How is permanent hardness of water determined by alkali titration method? 100 ml of a sample of water has a hardness equivalent to 12.5 ml of 0.08N MgSO4. What is the hardness of water.
7.a) b)
What are the characteristics of a good refractory. Write a note on thermal insulators.
Aj
nt
uW
4.a) b)
8.a) b)
Discuss the manufacture of Portland cement by wet process. Write a note on setting and hardening of lime. @&@&@
Answer any FIVE questions All questions carry equal marks --what an account of procedure adopted for cleaning the surface prior to coating on them. What is a lacquer? What are its ingredients. Write notes on : (i) Corrosion fattigue. (ii) Corrosion inhibitors. What happens when a metallic rod is partially buried under earth?
or ld
1.a)
Max. Marks: 80
Explain the sacrificial anode method of corrosion control. Write a note on emulsion paints.
4.a) b)
Write down the factors affecting electroplating. Write notes on: (i) Stress Corrosion. (ii) Soil Corrosion.
5.a)
Explain clearly the function of the following additives when added to polymers. (i) Plasticizers. (ii) Fillers and (iii) Foaming agent. How are the following polymers prepared? (i) Polymethacrylate. (ii) Thiokol.
b)
Explain with a neat sketch the various steps in the treatment of water for municipal supply. What are scales and sludges? How are they formed?
nt
6.a)
uW
3.a) b)
b)
What is an insulator? How are they classified. Give examples. Write any five disadvantages of using Refractory materials.
Aj
7.a) b) 8.a)
b)
Write briefly on the classification of lime, indicating their composition, properties and uses. Write the composition of Portland cement. @&@&@
Set No: Code No: RR-10104.
4
I-B.Tech. Regular Examinations, May/June-2004
(Civil Engineering) Time: 3 Hours
b) 2.a) b)
Max. Marks: 80
Answer any FIVE questions All questions carry equal marks --What is Galvanic corrosion? When zinc and copper are electrically connected and exposed to an electrolyte which metal will get corroded? Why? Explain the mechanism. What is meant by passivation?
or ld
1.a)
.in
APPLIED CHEMISTRY
Write notes on : (i) Metal Cladding. (ii) Cementation. Distinguish between galvanising and tinning.
How do paints differ from varnishes. Explain the method of controlling corrosion by modifying the environment.
4.a) b)
Write a note on compounding of plastics. Give the composition, properties and engineering applications of silicone resins.
5.a) b)
Explain the changes caused in the characteristics of rubber due to vulcanisation. Explain the principle of estimation of total hardness of water using EDTA method.
6.a) b)
Compare the lime soda process with zeolite process of water softening. Calculate the quantity of lime and soda required for softening 1,00,000 litres of water containing the following impurities per litre. Ca(HCO3)2 = 8.1 Mg; CaSO4 = 13.6 Mg. Mg(HCO3)2 = 7.3 Mg; MgSO4 = 12.0 Mg. Nacl = 4.6 Mg; Silica = 1.2 Mg.
nt
uW
3.a) b)
Write any three important characteristics of insulators. Explain the different types of refractories.
8.a) b)
Discuss the salient features of the manufacture of lime and explain the reactions. What is the difference between the setting of lime and the setting of cement.
Crack in the metal · (ii) · Wire fence. (iii) Rivetted joints. b) What is meant by phosphating of steel? 4.a) Distinguish between thermoplastics and thermosetting ...
COMPUTER GRAPHICS · (Mechatronics) ... Explain briefly about various display devices used in computer graphics. 2. a) Write an ... 2D graphics primitives.
Estimate residual enthalpy and residual entropy for an equimolar mixture of carbon · dioxide (1) â nitrogen (2) at 400K and 135 bar pressure by the Redlich-Kwongg .... P2, T2. If the separation is removed and the gases are mixed adiabatically.
2.a) Explain the role of display interpreter in graphical display, with a block diagram. b) What is meant by normalized device co-ordinate system? What are its ...
2.a) Will capacitance of a transmission line depend upon the ground effect? If so explain. b) Explain the ... sag, if the factor of safety is 2 and ice weighs 910kg/m.
Engineering, Computer Science and Engineering, Electronics and Instrumentation · Engineering, Bio Medical Engineering, Computer Science and Information.
b) Explain the effect of oxygen on radio sensitivity of the tumor cell. 6. a) Describe the ... Explain the Modalities of radiation therapy. 6. Explain the radiation ...
Himalayan Orchards have canned apple and bottled juice as its product with profit ... following table gives the expected annual sales ( in thousands of Rs.) for ...
exonuclease activity, initiator protein, helicase, topoisomerase. 3. Write the differences between the eukaryotic and prokaryotic RNA polymerases · and their ...
d) In many factories, the smoke before it comes out from the chimney is led over · charged metallic plates. 7.a) What is meant by equivalent and molar ...
What do you understand by 'Marketing mix' and what components influence the · marketing process? 7.a) Write a short note on CPM. b) What is the difference ...
layer and transport layer. b) Map TCP/IP Protocol suite onto the layers of the OSI model. ... 3. a) What is the frame format of HDLC protocol. What are operational ...
and exposed to still air at 25°C. If the pipe wall temperature is 295°C, · determine the rate of heat loss. .... expression for the same. b) Air at 25°C flows normally to 0.03m outer diameter water pipe with a velocity .... 0.04 kg/s of 34°API cr
a) Recorder b) Instrumentation diagrams c) Refractometer d) McLeod gage. - - - ... Explain the construction and working of the McLeod gage and the Pirani gage.
EEG, EMG and ERG signals. 2.a) Draw the heart pump diagram. Explain how it pumps blood to all the body parts. b) Explain how Bioelectric potentials are ...
Science and Engineering, Chemical Engineering, Computer Science and Information · Technology .... kept in mind for drawing network? 8. The following ...
c) Give a brief note on prosthetic heart valves. 8. Describe the mechanical properties of bone with examples. Explain what do you · understand by Lubrication of ...
b) Derive the power angle equation of a single machine connected to infinite bus. .... 2. a) Derive the Power balance equations in a power system and there from ...
Obtain an expression for the steady state Equimolal counter diffusion of two gases ... 1. a) Write the fick's law of diffusion for 'Z' direction. What is the significance ...
c) What is etching? Explain with neat sketches. d) Draw a neat sketch of metallurgical microscope and explain various parts of it. 2.a) Draw neat sketches of 3 ...
Write an account of Hodgekin-Huxley equation and add a note on its biological · relevance. Explain the terms- Membrane time constant and space constant.