Press Release York, Pennsylvania, USA January 25th, 2017 PROCESSING AND WORKPLACE SAFETY TIPS FOR FLUOROPOLYMER MEDICAL TUBING by Steve Maxson, Business Development Director—Extrusion, Graham Engineering Corporation Recently Graham Engineering Corporation has received a number of inquiries from medical tubing processors with an interest in venturing into the world of fluoropolymers. Materials such as FEP, PFA, PVDF and ETFE are known for their excellent physical properties and hold promise for many medical applications, such as micro tubing for intravenous (IV) catheters and insulin infusion, single lumen and multi-lumen tubing for endoscopy and cardiology devices, and heat shrink tubing used as a manufacturing aid for catheter reflow purposes. Our American Kuhne extrusion systems have been employed for such applications. Here are some important considerations that we have identified regarding extrusion equipment and safety related to processing fluoropolymers:

Graham Engineering Corporation’s Steve Maxson

Components that come in contact with molten resin such as the die head, tooling, adapter, breaker plate, and screw should be made of corrosion-resistant metals with high nickel content like Inconel 625 or Hastelloy C276. For corrosion protection of the extruder barrel, I recommend a tungsten carbide/nickel-based bimetallic barrel liner such as X800®. For small medical extruders, 1.25-inch (32 mm) and smaller, the entire backing material of the bimetallic barrel is solid Inconel and the liner material is X800®. The typical fluoropolymer screw is a single-flight design with a 3:1 compression ratio. In some cases a low-shear Saxton-type distributive mixer is included at the end of the screw. Although Inconel and Hastelloy are corrosion resistant, these specialty metals have low torsional strength compared to common screws that are made of 4140 or 4340 heat-treated steel. For instance, Hastelloy 625 has a yield strength of approximately 52,000 FEP intravenous catheter tubing psi (359 MPa), about half that of 4140 steel at 28-32 Rc. Inconel 625 is a little stronger than Hastelloy C276 but is not as corrosion resistant. Care must be taken to avoid screw breakage when using an Inconel or Hastelloy screw while processing other high temperature polymers that are not corrosive such as PEEK, Polysulfone (PSU), and Polyetherimide (PEI). For example,

a 1-in. (25mm) extruder with a 5HP motor geared for 100RPM screw speed is very likely to snap a screw made from Hastelloy 625 during a cold start situation. Fluoropolymers have high melting points. For instance, PFA has a melting point at about 305°C (581°F). The barrel set points for FEP are in the 600-740°F range; therefore the extruder barrel heaters should be made from cast bronze and rated up to 480°C (900°F). Due to the high operating temperatures, a special dual-layer barrel safety shroud should be used over the barrel to protect the operator from burns. Fluoropolymers are also highly susceptible to melt fracture (“shark skin” appearance) on the surface of tubing, caused by excessive shear in the die tooling gaps as output rates are increased. The typical approach to avoiding melt fracture is Magnified view of melt-fractured surface to utilize larger tooling gaps, which means making the tubing with a larger drawdown. Tooling drawdowns of 3:1 to 20:1 are common for many polymers, whereas processors of fluoropolymers have used drawdowns of 50:1 or greater. Proper safety measures are important to consider when processing fluoropolymers. According to the “Guide to the Safe Handling of Fluoropolymer Resins,” published by the Fluoropolymers Division of the Plastics Industry Association (formerly SPI), gases, vapors and fumes released during the extrusion of fluoropolymers may be harmful to human health. Vapors and fumes released during extrusion and while cleaning the die head can cause flu-like symptoms (chills, headaches, fever) that typically pass within 24 to 48 hours. The corrosive gases should be captured immediately and removed with an exhaust ventilation system that includes extraction hoods, ducting, and a fan. Extraction hoods should be placed above the die head and, for large-diameter tubing, an additional extraction hood over the area where the tubing is cut to length. Sealed packages of fluoropolymer resins should only be opened in well ventilated areas. Consult the resin supplier’s MSDS for specific recommendations. If you would like more information about processing fluoropolymers please contact me at [email protected] or visit our exhibit at MD&M West (Booth 1933), where we will have a compact modular American Kuhne extruder on display with two barrel modules including a high temperature corrosion resistant 1.0” barrel. ###

Page 2 of 2

Press Release York, Pennsylvania, USA ... - Graham Engineering

Jan 25, 2017 - (“shark skin” appearance) on the surface of tubing, caused by excessive shear in the die tooling gaps as output rates are increased. The typical ...

466KB Sizes 1 Downloads 250 Views

Recommend Documents

Press Release
May 31, 2016 - from the disposal of a lease and a lower tax expense. Revenue for the fourth quarter was $220 million, up $34 million from the same ... provided non-IFRS data, including comparative store sales growth, in the press release above. This

Press Release
May 31, 2016 - Comparable sales from Indigo's online channel, indigo.ca, grew by 15.3%. Revenue growth was driven by continued double-digit growth in the general merchandise business and ... elementary schools across the country, bringing the total c

Press Release For Immediate Release
Mar 12, 2013 - financial services technology solutions, today announced that Indiana Auto ... Rankings are tabulated to reflect overall customer service, ...

Press Release For Immediate Release
Mar 12, 2013 - Fiserv began ranking auto auctions in 2001 as a way to aid lenders ... Rankings are tabulated to reflect overall customer service, operational efficiencies, sale ... channel management, and business insights and optimization.

press release - AP DSC
candidates may contact the help desk at Telephone Numbers CGG: 9701376237,. 9701376238 between 10.30 a.m. and 5.00 p.m on all working days from ...

Press release - Cision
7 days ago - ... with gasoline stations and car-washing services. (Tvätta), belongs to the company Tanka i Sverige AB and is a wholly owned subsidiary to.

press release - OPTRIS
Jul 5, 2011 - The monitoring modus offers an easy orientation at the point of measurement with the separate display of both images. The cross-fading modus ...

Press release - Cision
Apr 25, 2018 - with a deviation regarding how these are to be applied in Vattenfall's subsidiaries. Election of board members. The AGM decided that the ...

Press Release - Cision
Sep 18, 2017 - Vattenfall is a Swedish, state owned energy company with around 20,000 employees with operations in Sweden, Germany, the. Netherlands, Denmark, UK and Finland. Vattenfall focuses on growth in the business areas that drive the transitio

PRESS RELEASE - Snell & Wilmer
Jan 18, 2017 - Adobe. RealSource. Price-CCIM Scholarship. Katie Wilking Clinard ... that requires 100+ hours of training and considerable investment. Learn.

Press Release BioCarbon_BCP_NCP_Microsoft_20151014_Final.pdf
partners. Its shareholders are Global Forest Partners LP, the International Finance Corporation. (IFC), a member of the World Bank Group, and Macquarie Bank. www.biocarbongroup.com. About BCP. BioCarbon Partners (BCP) is an African-based and -owned s

Press Release - Vattenfall
Jul 21, 2016 - technology development centre off the Scottish coast. The wind farm, known as the European Offshore Wind Deployment Centre (EOWDC), will ...

Press Release - Automotive Digest
Tusker worked with leading carbon management consultants, Carbon Footprint, to show that its carbon emissions over the 12 month period from April 2011 to March 2012 had fallen to 93.95 tonnes of carbon dioxide from 103.67 tonnes in the previous year.

Press Release - Vattenfall
Sep 12, 2016 - Vattenfall supports the transition to a renewable energy system and has the ... the next five years and increase our wind power production in all.

Press Release - Vattenfall
Oct 6, 2016 - is to start on Monday at 10:00 am local time and will be streamed via this link. The hearing will end on Friday 21 October. On Saturday 15 October and Sunday 16. October, no hearings will take place. Vattenfall explicitly welcomes the p

Press Release -
Aug 16, 2016 - Decedent: Roberts, Keith Steven. Age: 58 years. Race: White. Sex: Male. Address: 1137 44 1/2 Ave NE. City: Columbia Heights. State: MN. Zip: 55421. Date & Time of Injury: 07/31/2016. Location of Injury: 1137 44 1/2 St NE. Columbia Heig

Press Release - GovDelivery
Location of Injury: Date of Death: 06/14/2016. Time of Death: 7:37AM. Location of Death: 1722 Upton Ave N. Minneapolis, MN 55411. Comments: UPDATE: The death investigation has concluded that this individual died of natural causes, the cause of death

Press Release - Vattenfall
Sep 30, 2016 - Vattenfall is a Swedish, state owned, energy company with 28,000 ... Vattenfall supports the transition to a renewable energy system and has ...

Press Release - GovDelivery
Aug 4, 2016 - Decedent: Edwards, Samantha Mary. Age: 37 years. Race: White. Sex: Female. Address: 1722 Upton Ave N. City: Minneapolis. State: MN.

Press Release - Cision
Sep 8, 2016 - Vattenfall supports the transition to a renewable energy system and ... Compared to electricity produced from conventional sources, ... Page 2 ...

press release -
The official site of Governor Hickenlooper was recognized for its excellence with a Gold and Silver award for Social. Media and Government Agency websites. ... States and 20 countries including: Australia, Bangladesh, Canada, Germany, ...

Press Release - Vattenfall
Sep 15, 2016 - German Stefan Dohler was born in 1966 and holds a Master of Science (M.Sc.) ... Vattenfall discloses the information pursuant to the Swedish ...

Press Release - Automotive Digest
The company, which supplies Leaselink, the UK's leading e-procurement platform for the contract hire and leasing and fleet management industries, had outgrown its previous offices in. Cumnor, where it had ... Ebbon-Dacs, which is owned by a private e