Sacramento 916-546-5577 Roseville 916-789-7755

TN-450 MANUAL RESET INSTRUCTION If after installing a new TN-450 cartridge your printer still displays that toner needs to be replaced, please follow the instructions below to manually reset your toner. Follow the instructions based on the model of your printer. HL SERIES

1. Ensure the printer is turned off. 2. Open the printer front cover. 3. Hold the Go button while turning the printer on. 4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button. All of the LEDs will turn off. 5. Press the Go button two (2) times. The Toner, Drum, and Error LEDs will turn on. 6. Press the Go button seven (7) times. 7. The Error LED should now be flashing, close the front cover.

MFC SERIES

1. Open front door. 2. Press Clear. 3. Press *00 (ignore the drum reset information). 4. Press OK. 5. Close front door.

Sacramento – 2626 Fulton Ave. Sacramento, CA 95821 Roseville – 1000 Melody Lane #117 Roseville, CA 95678

DCP SERIES

1. Have to do the key sequence fairly quickly or it defaults back to the “COVER IS OPEN” message. 2. Open the front door to access the toner 3. Press the “Clear” button. 4. Press the “Start” button. (When you press START the screen should clear.) 5. Press the “↓” or “Down Arrow” button. 6. Press the “↑” or “Up Arrow” button. 7. When you press the down arrow an ‘E0′ should appear, which will change to ’00′ when you press the up arrow 8. Press the “OK” button. 9. When it says ‘ACCEPTED’ Close the front door.