Name: __________________ Period: _________________

Matching - Vocabulary 1. ____a. Uniform distribution

____b. Normal distribution 3. ____c. Standard normal dist. 2.

4. ____d. Central limit theorem

a. As sample size  , dist. of sample means approaches a normal distribution

b. C.  = 0,  = 1

D.

Draw a graph – don’t forget your x-line, z-score line, and P-line! Round answers to 4 decimal places. 5. In one region, the September energy consumption levels for single-family homes are found to be normally distributed with a mean of 1050 kwh and a standard deviation of 218 kwh. (a) For a randomly selected home, find the probability that the September energy consumption level is between 1050 kwh and 1250 kwh. (b) For a randomly selected home, find the probability that the September energy consumption level is below 1200 kwh (c) For a randomly selected home, find the probability that the September energy consumption level is between 1100 kwh and 1225 kwh (d) For a randomly selected home, find the probability that the September energy consumption level is above 1175 kwh. (e) For a randomly selected home, find the probability that the September energy consumption level is between 1000 kwh and 1200 kwh.

P45 =__________ (f) Find P45 (the 45th percentile). (g) If 50 different homes are randomly selected, find the probability that their mean energy consumption level for September is greater than 1075.

6. In a study of the causes of death, it was found that 52% of all Americans die from heart disease. Find the probability that in a group of 500 randomly selected Americans, at least 275 die from heart disease. 7. The Worthington Pottery Company manufactures beer mugs in batches of 120 and the overall rate of defects is 5%. Find the probability of having more than 6 defects in a batch. 8. A bank’s loan officer rates applicants for credit. The ratings are normally distributed with a mean of 200 and a standard deviation of 50. (a) If an applicant is randomly selected, find the probability of a rating that is between 200 and 275. (b) If an applicant is randomly selected, find the probability of a rating that is below 250. (c) If an applicant is randomly selected, find the probability of a rating above 300. (d) If an applicant is randomly selected, find the probability of a rating between 170 and 220. (e) If an applicant is randomly selected, find the probability of a rating above 178. (f) Find D6 (g) If 40 different applicants are randomly selected, find the probability that their mean is above 215. 9. Replacement times for CD players are normally distributed with a mean of 7.1 years and a standard deviation of 1.4 years. Find the replacement time separating the top 45% from the bottom 55%.

Chapter 6 Review.pdf

The Worthington Pottery Company manufactures beer mugs in batches of 120. and the overall rate of defects is 5%. Find the probability of having more than 6. defects in a batch. 8. A bank's loan officer rates applicants for credit. The ratings are normally. distributed with a mean of 200 and a standard deviation of 50. (a) If an ...

156KB Sizes 0 Downloads 54 Views

Recommend Documents

Chapter 6 - Home
write each new term and its definition in your notebook. □ communication (p. 174). □ verbal communication. (p. 175). □ nonverbal communication ..... Page 9 ...

Chapter 6
when a lot of features are irrelevant and drown out the relevant features' signal in the distance calculations. Notice that the nearest-neighbor method can easily be applied to regression problems with a real-valued target variable. In fact, the meth

Chapter 6 Friction.pdf
R. T1. R. A 1g. 1a. R. R. 1g. 1a.. 0.5g. 0.5g. a. A B. =0.2. 0.5kg. 1kg 1kg. =0.2. 2×0.5 16N. R1. 4g. 16N=T. 2R. 4×0.5. 30°. a. 1. 0.5 m/s2. 2kg. 4kg. 2. Page 3 of 10. Chapter 6 Friction.pdf. Chapter 6 Friction.pdf. Open. Extract. Open with. Sign

chapter 6.pdf
There was a problem previewing this document. Retrying... Download. Connect more apps... Try one of the apps below to open or edit this item. chapter 6.pdf.

AIFFD Chapter 6 - Mortality - GitHub
6.5 Adjusting Catch-at-Age Data for Unequal Recruitment . . . . . . . . . . . . . . . . . . . . . . ...... System: Windows, i386-w64-mingw32/i386 (32-bit). Base Packages: base ...

Chapter 6-DatabaseConnectivity.pdf
The Prerequisite for connecting a Java application to MySQL is adding MySQL. JDBC driver in the Project/Program. The NetBeans IDE comes with pre-bundled MySQL JDBC Driver. You may add. JDBC Driver in the Database Connectivity Project as follows-. Pag

Chapter 5 and 6 - GitHub
Mar 8, 2018 - These things are based on the sampling distribution of the estimators (ˆβ) if the model is true and we don't do any model selection. • What if we do model selection, use Kernels, think the model is wrong? • None of those formulas

Chapter 6.pdf
by gulping air at the surface of the water or by releasing dissolved gases. from their blood. 6.1. expanded swim bladder contracted swim bladder. Figure 2.

CHAPTER 6 Clean.pdf
time by approved providers. Approved providers include: (A) The American Physical Therapy Association (APTA),. including any sections, credentialed ...

Chapter 6.pdf
Page 1 of 18. Page 1 of 18. Page 2 of 18. Page 2 of 18. Page 3 of 18. Page 3 of 18. Page 4 of 18. Page 4 of 18. Chapter 6.pdf. Chapter 6.pdf. Open. Extract. Open with. Sign In. Details. Comments. General Info. Type. Dimensions. Size. Duration. Locati

CHAPTER 6 Clean.pdf
A license or certificate holder who seeks a waiver of the continuing. competence requirements shall provide to the Board in writing the specific reasons for requesting. the waiver and additional information that the Board may request in support of th

Chapter Number 6 Chapter Title Incentives and ...
Mar 30, 2015 - well as by technology. ..... [6] Casper, B. A., and S. A. Tyson. .... cisions under incomplete information, whereas we abstract from collective action ...

Geometry Chapter 6 Test Review.pdf
Loading… Page 1. Whoops! There was a problem loading more pages. Retrying... Geometry Chapter 6 Test Review.pdf. Geometry Chapter 6 Test Review.pdf.

Chapter 6 Multivector Calculus -
definition. 1We are following the treatment of Tensors in section 3–10 of [4]. ...... ∂αL |α=0 = ∂αL(x + αn)|α=0 = n · ∇L = ∇ · (nL). (8.66). ∂αψ i|α=0 = n · ∇ψi.

Chapter 6. The Elections Act.pdf
... Social Networking. §6-3.8. Door-to-door Campaigning. §6-3.9. Social Functions. §6-3.10. Student Government Facilities. §6-3.11. Campaign-Restricted Areas.

Chapter 6 PowerPoint Review.pdf
Page 2 of 19. Introduction. In past chapters we covered different types of data. distribution. In chapter 6, we moved from discrete probability. distributions to continuous probability distributions. Although. part of the chapter focuses on uniform d

Chapter 6 Systems in Motion.pdf
Download. Connect more apps... Try one of the apps below to open or edit this item. Chapter 6 Systems in Motion.pdf. Chapter 6 Systems in Motion.pdf. Open.

Chapter 6 Synchronous Sequential Machines - Wiley
A description for this result is not available because of this site's robots.txtLearn more

CHAPTER 6 n' 7.pdf
A special computer DNS (Domain Name Server) is used to give name to the IP. Address so that user can locate a computer by a name. • For example, a DNS ...

CHAPTER 6 POTASSIUM CHANNELS AND ...
roles are best understood. Microglia can ...... that best predicts a Kv channel's contribution to the function .... the scaffolding protein, PSD-95 in cultured microglia.

Adopted Rule Chapter 6.pdf
There was a problem previewing this document. Retrying... Download. Connect more apps... Try one of the apps below to open or edit this item. Adopted Rule ...

Managerial Economics & Business Strategy Chapter 6
Procure inputs in the least cost manner, like point B. • Provide incentives for workers to put forth effort. • Failure to accomplish this results in a point like A.

chapter 6 wired network simulation -
Page 1 of 33. Computer Network Simulation Using NS2. 4/16/2018 file:///C:/Users/admin/AppData/Local/Temp/bityefte.y04/OPS/xhtml/13_Chapter06.xht.

GO Chapter 6 - Mechanical Dimensioning.xlsx
AutoCAD's commands. Manipulate dimension placement dimension an isometric drawing. Create appropriate drawing notes. Describe the types of dimensions. Follow the rules for dimensioning. Detail a mechanical drawing using. What do the various symbols i