DIGITAL MULTIMETERS
MS320
Model
MS8233E
Description
• LCD display • Pocket size • Auto ranging • Data hold • Auto power Off
• LCD display • Pocket size • Data hold
• Large LCD display • Data hold • Transistor tester
AC Voltage
4V - 600V
200V & 600V
2V - 600V
2V - 600V
Yes
Yes
Yes
Yes
40mA - 400mA
200µA - 20A
200µA - 20A
4nF - 100µF
―
―
Yes
Yes
Yes
DC Voltage Diode Test
AC Current
DC Current Resistance
Capacitance Frequency
Continuity Test
400mV - 600V
200mV - 600V
200mV - 600V
40mA - 400mA
―
2mA - 20A
400Ω - 40MΩ
200Ω - 20MΩ
200Ω - 20MΩ
0 - 100KHz
―
― ue Tr S RM
MS8264
Code
2
MS8321D
MAS830
MS8250A
• Back lit LCD display • Auto ranging • Non contact voltage detector • Max data hold • °C / °F (-20℃ - 1000℃)
200mV - 600V 200µA - 10A 200µA - 10A
200Ω - 20MΩ ―
200mV - 750V
200mV - 1000V Yes
20µA - 10A 20µA - 10A
200Ω - 20MΩ ―
Yes
MS5208
• Large LCD display • Data hold • Transistor tester • Auto power off • Low batt. indication • °C / °F (-20℃ - 1000℃)
2nF - 100µF
―
ue Tr S RM
MY60
Yes ue Tr S RM
MS8340B
MS8228
Description
• Backlit LCD display • Data hold • Transistor tester • Inductance: 20mH - 20H
• Backlit LCD display • Non contact voltage detector • Auto ranging • Data hold • Auto power off • Low battery indication • Relative measurement
• Backlit LCD display • Data logging • Auto / Manual ranging • Low Pass Filter (1KHz) for AC • Max/Min/AVG data hold • Auto power off • Low battery indication • DAR / PI Insulation mode
• Backlit LCD display • Bargraph display • Peak measurement • Auto ranging • Max/Min data hold • Auto power off • Low battery indication • USB interface (Windows OS) • Relative measurement • °C / °F
• Backlit LCD display • Auto ranging • Relative humidity • Infrared thermometer • Transistor tester • Data hold • °C / °F
AC Voltage
2V - 750V
400mV - 600V
600mV - 750V
220mV - 700V
40mV - 750V
Diode Test
Yes
Yes
Yes
Yes
DC Current
2mA - 10A
60mA - 400mA
220µA - 10A
Capacitance
2nF - 200µF
Temperature
-20°C - 1000°C
DC Voltage
200mV - 1000V
AC Current
20mA - 10A
Resistance
200Ω - 200MΩ
Frequency
0 - 20KHz
Continuity Test
Yes
600mV - 1000V
220mV - 1000V
600mA - 400mA
220µA - 10A
600Ω - 60MΩ
220Ω - 220MΩ
0 - 5MHz
6nF - 60µF 9.999MHz
22nF - 220mF 0 - 220MHz
Yes
Yes
Yes
400mV - 600V Yes
400µA - 10A 400µA - 10A
400Ω - 40MΩ 50nF - 100µF -
-30°C - 1300°C
MET
-10°C - 700°C
40mV - 1000V 400µA - 10A 400µA - 10A
400Ω - 40MΩ 50nF - 200µF
10Hz-100KHz
0 - 40°C / -20 - 300℃ (IR) Yes
DIGITAL CLAMP METERS ue Tr S RM
Model
M266
MS2000G
MS2102
ue Tr S RM
ue Tr S RM
Description
• Backlit LCD display • Data hold • Jaw Size: 55mm
• Large backlit LCD display • Bargraph display • Data hold • Jaw Size: 55mm
• Backlit LCD display • Data hold • Auto ranging • Auto power off • Low battery display • Work light (torch) • Jaw Size: 40mm
AC Voltage DC Voltage Diode Test AC Current DC Current Resistance Capacitance Frequency Temperature Continuity Test
750V 1000V Yes 20A & 1000A ― 200Ω & 20KΩ ― ― ― Yes
200V & 750V 2V - 1000V Yes 200A & 2000A ― 200Ω - 2MΩ ― 0 - 2KHz -20°C - 750°C Yes
400V & 600V 400V & 600V Yes 40A & 400A 40A & 400A 2000Ω ― ― ― Yes
6V - 600V 600mV - 600V Yes 6A - 1000A ― 600Ω - 60MΩ 4nF - 4000µF 0 - 10MHz ― Yes
Digital Clamp Meters
High Sensitivity Clamp Meter
MS2015C
MS2006B
ue Tr S RM
Code
Description
AC Voltage DC Voltage Diode Test AC Current DC Current Resistance Capacitance Frequency Continuity Test Temperature
• Backlit LCD dual display • Max/Min data hold • Auto power off • Jaw Size: 40mm • Auto / Manual ranging • Bargraph display • Non contact voltage detector • Relative measurement • Work light (Torch) • Low battery display 600mV - 750V 660mV - 1000V Yes 66A - 1000A ― 660Ω - 66MΩ 6.6nF - 66mF 0 - 10KHz Yes ˗20°C - 1000°C
• Large LCD display • Data hold • Low battery display • Jaw Size: 31mm
― ― Yes 2mA - 60A ― ― ― ― Yes ―
Fork Meter
MS2600
• Large backlit LCD display • Auto ranging • Max/Min data hold • Auto power off • Low battery display • Relative Measurement • Jaw Size: 12mm
4V - 600V 4V - 600V Yes 0 - 200A ― 400Ω - 40MΩ 40nF - 40µF 0 - 100kHz Yes ―
MET
MS2108
MS2026R
• LCD display • Data hold • Jaw Size: 50mm
• Backlit LCD display • Data hold • Auto ranging • Low battery display • Work light (torch) • 100msec inrush current limiter • Jaw Size: 26mm 660mV - 600V 660mV - 600V Yes 66A & 600A 66A & 600A 600Ω - 66MΩ 6.6µF - 66mF 0 - 1KHz -40°C - 750°C Yes
3 Ph Power Clamp Meter 1 Ph Power Clamp Meter ER S W SER O Y P L A AN
MS2205
MS2208
Volts: 0.1V - 600VAC
Volts: 0.1V - 600VAC
Power
Power
Apparent: 0.001kVA - 600kVA
Apparent: 0.01kVA - 120kVA
Harmonics: 45Hz - 65Hz
Harmonics: 30Hz - 1KHz
PF 0.3 - 2
PF 0.3 - 1
• Large backlit LCD display • Large backlit LCD display • True RMS • True RMS • Auto ranging • Auto ranging • Max/Min data hold • Data hold • Auto power off • Data logging • Work light (torch) • RS232 interface • Jaw Size: 26mm (Windows OS) • Jaw Size: 50mm
Amps: 0.01A - 1000AAC Active: 0.01kW - 600kW
Amps: 2mA - 3999mA / 4A - 200A
Active: 0.1kW - 120kW
Reactive: 0.001kVAr - 600kVAr Reactive: 0.01kVAr - 120kVAr 1, 2-6, 7-8, 9-10, 11-15, 16-21
1, 2-6, 7-8, 9-10, 11-15, 16-21
3
FLUKE INFRARED THERMOMETERS
IP40
Code
IP40
IP54
IP54
FLUKE 59 MAX
FLUKE 59 MAX+
FLUKE 62 MAX
Description
Backlit LCD Display Trigger Protection 0n/Off High/Low Alarms Laser Targeting
Backlit LCD Display Trigger Protection 0n/Off High/Low Alarms Laser Targeting
Backlit LCD Display Trigger Protection On/Off High/Low Alarms Laser Targeting
Backlit LCD Display Trigger Protection On/Off High/Low Alarms Dual Laser Targeting
Range
-30°C to 350°C -22°F to 662°F ±2°C / ±2% 8:1
-30°C to 500°C -22°F to 932°F ±1.5°C / ±1.5% 10:1
-30°C to 500°C -22°F to 932°F ±1.5°C / ±1.5% 10:1
-30°C to 650°C -22°F to 1202°F ±1°C / ±1% 12:1
Accuracy Optical Resolution Reading
Maximium / Minimum / Difference / Average
FLUKE 62MAX+
FLUKE DIGITAL MULTIMETERS ue Tr S RM
ue Tr S RM
Code
FLUKE 106
FLUKE 107
FLUKE 15B
FLUKE 17B
Safety Class II 600V Safety Class III 300V Display Hold Auto Sleep Mode Relative Mode Auto / Manual Ranging "K" Thermocouple Included
Description
Safety Class III 600V Data Hold
Safety Class III 600V Data Hold Backlit LCD Display Duty Cycle Measurement
Safety Class II 600V Safety Class III 300V Display Hold Auto Sleep Mode Auto / Manual Ranging
AC Voltage
600V
600V
1000V
AC Millivolt
600mV
600mV
-
-
DC Voltage
600V
600V
1000V
1000V
AC Current
10A
10A
10A
10A
DC Current
10A
10A
10A
10A
Resistance
40MΩ
40MΩ
40MΩ
40MΩ
Capacitance
1000µF
1000µF
100µF
100µF
Frequency
-
100kHz
-
100kHz
Temperature
-
-
-
-55ºC - 400ºC
Diode Test
No
Yes
Yes
Yes
Continuity Test
Yes
Yes
Yes
Yes
4
MET
1000V
FLUKE COMPACT AC CLAMP METERS ue Tr S RM
Code
FLUKE 302
FLUKE 303
FLUKE 305
FLUKE 325
Safety Class III 600V Safety Class IV 300V 30mm Jaw Size Large backlit LCD display Data Hold
Safety Class III 600V Safety Class IV 300V 30mm Jaw Size Large backlit LCD display Data Hold
Safety Class III 600V Safety Class IV 300V 30mm Jaw Size Large backlit LCD display Data Hold
AC Current
400A
600A
999.9A
Safety Class III 600V Safety Class IV 300V 30mm Jaw Size Large backlit LCD display Data Hold Temperature Measurement 40A / 400A
DC Current
No
No
No
40A / 400A
AC Voltage
400/600V
400/600V
400/600V
600V
DC Voltage
400/600V
400/600V
400/600V
600V
Resistance
4000Ω
4000Ω
4000Ω
400Ω/4kΩ/40kΩ
Capacitance
No
No
No
100µF - 1000µF
Frequency
No
No
No
5Hz - 500Hz
Continuity
≤ 70Ω
≤ 70Ω
≤ 70Ω
≤ 30Ω
Description
• Low Battery Indication • Detects Voltage even with discharged batteries
Code
IP54
FLUKE VOLTAGE & CONTINUITY TESTERS IP64
FLUKE T90
IP64
FLUKE T110
IP64
FLUKE T130
FLUKE T150
Description
Voltage/Continuity Tester LED Bar Graph Display
Voltage/Continuity Tester LED Bar Graph Display Switchable Load
Voltage/Continuity Tester LED Bar Graph Display Switchable Load LCD Display
Voltage/Continuity Tester LED Bar Graph Display Switchable Load LCD Display Resistance Measurement
Voltage
12 - 690V AC/DC
12 - 690V AC/DC
6 - 690V AC/DC
6 - 690V AC/DC
No
No
No
1Ω - 2kΩ
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
0 - 400Ω (Audible & Visual)
0 - 400Ω (Audible & Visual)
0 - 400Ω (Audible & Visual)
0 - 400Ω (Audible & Visual)
Yes
Yes (Switchable)
Yes (Switchable)
Yes (Switchable)
No
Yes
Yes
Yes
No
No
Yes
Yes
No
Yes
Yes
Yes
Resistance Torch Diode Test Continuity Test Beeper Vibration Display Hold Rotary Field Indication
MET
5
DATALOGGING EQUIPMENT
Multimeter True RMS & Data Logger
PROVA 803
• Dual Input Channels • Dual Channels Measurement similar to a Dual Channels DSO (V+V/V+A) • Hz+Duty Cycle Dual Display • Standalone Data Logging of 10 708 Records both Channels • RS-232C Interface, application software • Bandwidth 10kHz (max.) • Basic Accuracy 0.04% (DC) and 0.2% (AC)
PROVA 901
TES-3063
• Dual Input Channels • Compare Voltage at two different locations • Read Voltage and Current at the same time • Standalone Data Logging of 10 708 Records both Channels • Optical Isolated RS-232C ASCII Interface, application software • Bandwidth 200kHz • Basic Accuracy 0.02% (DC) and 0.1% (AC) DCV/ACV: 60.000mV-1000.0V DCA/ACA: 600.00µA-10.000A Resistance: 999.99Ω - 40MΩ Capacitance: 60.00nF-600.0µF Frequency: 1Hz-2.000MHz Duty-Cycle and Diode Test Continuity Test
• 1600 Point Data logging function • True Power/Apparent Power/Power Factor Measurement • True RMS. V, A, W • 4 digits with 2” LCD Display • MIN/MAX/AVG Measurement • Amp/Voltage Frequency Measurement • PEAK HOLD Detector • 3 Phase adaptor for 3 phase power measurement • Peak hold/Data hold
Temperature/Humidity & Air Pressure Datalogger
Sound Level Datalogger
DC Current or Voltage Datalogger
ST-174B
ST-173
• Manual & Automatic start mode • Alarm set-up & indication • Recording & low battery indication • USB port for data traffic & power • Status indication via Red/Yellow & Green LED
• Max - Min measurement • Alarm value set-up / A&C Weighting • Normal & Peak Mode • Fast and slow response • Manual/Auto Mode
Data memory: 10 000 readings Sampling Rate: 1 min to 18 Hrs Data Output: USB Temp Range: -40 to 70°C/ -40° to 158°F Resolution: 0.1°C/0.1°F Humidity Range: 0 to 100%RH Resolution: 0.1%RH Air Pressure: 950 to 1050hPa Resolution: 0.1hPa
Sampling Rate: 1sec - 24hr Accuracy: ±1.4db Freq Range: 31.5Hz to 8kHz Dynamic Range: 50db Level Ranges: Auto: 30db - 130db Time Weighting: Fast(125ms),slow(1s) Reading Memory:129920 points for dBA or dBC Data Output: USB Data
DCV/ACV: 60.000mV-1000.0V DCA/ACA: 600.00µA-10.000A Resistance: 999.99Ω Capacitance: 60.00nF-600.0µF Frequency: 1.000Hz-2MHz Duty-Cycle and Diode Test Continuity Test
6
AC/DC Power Clamp Meter
PC Adaptor & Software
TES-3064 (PC adaptor)
• To down load the data into the computer from datalogging memory of TES-3063 • Communicates with PC via RS-232 for further data analysis and reports
RS232
Ranges • Volt: 10V - 600VAC
• Reactive: 0.01 - 120KVAr
• Active power: 0.1 - 120KW
• PF (ind): 0.3 - 1
• PF (cap): 0.3 - 1
• Amp: 2mA-200A
• Apparent: 0.01 - 120KVA
ST-171A
ST-171V
AC Current & Voltage Datalogger
ST-175CV1
• Freely selectable measuring cycle • USB Data Download • Alarm display if parameters exceeded
• True RMS reading • USB-PC Interface (c/w software) • Single channel input • c/w Probes for 1PH, current and voltage measurements
Status display: 2 LEDs DC Voltage Range: 0 to 30VDC Accuracy: ±0.5%+1 Memory: 32000 readings Sampling Rate: 400Hz to 24 hrs
Current: 10 - 200A Voltage: 10 - 600VAC Sampling Rate: 1sec - 24hr Reading Memory: Up to 100 000
Status display: 2 LEDs Current Range: 4 to 20m ADC Accuracy: ±1%/±1Count Memory: 32000 readings Sampling Rate: 1sec - 24hrs
MET
DIGITAL/ANALOG INSTALLATION TESTERS
MS5908C • True RMS • Ground to Neutral Voltage • Peak Voltage • Frequency • 5A/8A/10A load for volt drop test • Socket test function • RCD / GFCI test Line Volts: 85 - 265V Neutral/Ground: 0 - 10V Peak: 121 - 374V Freq: 45 - 65Hz Volt Drop: 0.1 - 99.9% RCD trip time: 1ms - 6.5s RCD trip Amp 30mA GFCI trip time: 1ms - 6.5s GFCI trip Amp: 6mA
IT811A
• Verifies that the wiring is correct (Neon light indication) • RCD testing with variable fault current • Trip settings 10 - 35mA
2732IN
EM580F
• Auto zero adjustment • Auto discharge • Data hold • Backlit LCD display • Range: 0 - 20GΩ • Test Voltage: 250/500/1000/2500V • AC Voltage: 0-750V ±2% • Batteries Included
Analog
• Test Ranges: 125V: 2/20/200MΩ 250V: 20/200/500MΩ 500V: 20/200/1000MΩ • Lock function to lock test button • Data Hold • Overload protection
2751IN Digital
MINITRIP 1
MINITRIP 1/L
As MINITRIP 1 with 15A plug and lead. 150mA also available
• Analogue • 10-50mA variable earth current • Wiring check • 50/60Hz • Potentiometer selection • 230VAC ±15%
UNI-TRIP 50/150
50 or 150mA range 3 phase Earth Leakage Tester
Analog Earth Resistance Tester
NB311110
ST-1505
• AC Volts: 500V • Continuity Test •Timer 3 - 5mm (2751) •Twist lock test button (2732) • Manual zero OHM adjustment • Auto Discharge • Data Hold (2751)
MINITRIP 2
• Wiring check • 5-55mA Stepped output. Earth current test rated at 230VAC • 50/60Hz • Rotary switch selection • Push button injection
Hand Crank Insulation Tester
• Test Ranges: • Test Voltage: 500V 250V: 250/500/1000V • Insulation Resistance: 10MΩ 20/200/2000MΩ • OHM Meter: 0Ω to 500MΩ 500V: (Auto Ranging) 200MΩ 1000V: 400MΩ
Earth Leakage Testers
RCD Tester
TEL1-3 (230V) TEL1-4 (240V)
Analogue/Digital Insulation Tester
Digital Insulation Tester
Circuit Analyser
Loop/PSC/Earth
2820EL • Digital • Sensitivity test: 5-999mA (@ 317VL-E) • Time delay test: 0.000-99.999S • Sensitivity accuracy: ± 1mA • Time delay accuracy: ± 2ms • Multi-Voltage 100450VAC • 50Hz only • Auto-off • Auto Ranging • Phase Angle selectable: 0°/180° • Impact resistant casing suitable for heavy industrial use
MET
2726NA
• Earth resistance 10-100-1000Ω • Earth voltage: 0-30VAC • 820Hz ± 2mA • Timer function • 6 x 1.5V batteries (excl.) • Supplied with test leads
H.V. Insulation
2803IN
max 5kV
2804IN
max 10kV
• Digital • Test Ranges: • One push button 0,5/1/2,5/5kV 1/2,5/5/10kV smart control 50/125/250/ 25/50/125/ • Built-in wiring 500GΩ 250GΩ checker • Line impedance • Neutral impedance • Resistance measure is auto ranging on all • Earth impedance test voltages • Voltage L-N • Digital display • Voltage L-E • Timer • PSC L-N • Bargraph • PSC L-E • Auto-hold – Auto-off • Scroll through • Auto-discharge results • 50Hz 230V ± 20% • Non isolated circuit sensing (Audible & • Auto-ranging Visual Aarm) • Auto-off • c/w carrying case
7
POWER QUALITY ANALYSERS
Accessories
Code
A1069
A1122
Mini Clamp 5A/1V (range 2A - 100A)
A1039
A1039
Connection cable for current clamp
A1037-M
A1037-M
Current transformer 5A/1V
A1033-M
Current clamp 1000A/1V
A1257
3-phase flexible current clamps 3000/300/30A/1V
A1198
Magnetic contact probe
S2014
Safety fuse adapter, 3 pcs
A1257
Flex Clamp 3000A/1V Ranges: 3000/300/30A
A1069 A1122
Code
Voltage: TRMS, peak, crest factor Current: TRMS, peak, crest factor Power: P, Q, S Unbalance, flicker measurement Harmonic and THD measurement Interharmonics Energy (P, Q, Forward/backward) Events (interruptions, swells, dips) Inrush currents Waveform/Inrush Transients recording Power quality analysis EN 50160 Recording of adjustable alarms Temperature measurement Power factor cos ɸ PC software (Included)
Standard Set
1-phase flexible current clamps Test probe/clip/leads
MI-2892
4 Ch Cat III / 1000V 4 Ch (Auto clamp detection) ✔ ✔ ✔ ✘ ✔ ✔ ✔ Display and Snapshot only ✘ ✔ 10 ✘ ✔ PowerView
4x 3000 / 300 / 30 A
4x 3000 / 300 / 30 A
5/5/5
Temperature probe
1
Memory
Communication
Soft carrying bag
A1033-M
A1257 A1198
4/5/5 -
8GB SD supplied
8 MB internal
1
1
RS232, USB and Ethernet
PSU & Batteries
MI-2592
4 Ch Cat III / 1000V 4 Ch (Auto clamp detection) ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 7 ✔ ✔ PowerView 3
S2014
RS232, USB 1
1
Description
Mini Clamp 100A/1V (range 2A - 100A)
A1257
RENTAL
PQA702
Windows 95/98 based software
Accessories included with PQA702
8
Data Recording: • Start measuring period: programmable from 00:00 to 23:59 Code Information • Data intergration time interval (10ms sampling) PQA700-R Hire charge per day programmable from 1-999s (15 min) • Data References: Date & Time PQA700-H Unit for hiring with Portable Quality Analyser • Available memory: 1 MB Ram Portable Power Quality Analyser Parameters: • Measurement of all electrical variables, harmonic analysis • Instantaneous: W, VA, VAr, V, A, TPF, DPF, Hz and other parameters. Includes printer, carry case and • Max demand: W, VA, A, programmable 1 to 60m accessories. • Automatic calculation of kVAr necessary to • Printer: Impact Dot Matrix, paper width 54mm compensate low PF • Power Supply: 230VAC ±15% plus internal rechargeable • Maximum and minimum calculations (single phase battery (Life: 1 hour) and system variables): W, VA, VAr, V, A, DPF, TPF, • Carrying case/weight: 160 x 340 x 510mm / Instrument: Hz, THD, THD odd, THD even (THD is considered 3.7kg, the whole set: 10kg for both current and voltage) • Energies: +Wh, -Wh, +VArh, -VArh +VAh, -VAh (also Standard accessories included: • 4 voltage-measuring cables, length 3m by time period) • 1 RS232 cable + 9-25 pole adaptor • FFT analysis (harmonic distortion): histogram • 1 power supply cable indication up to 50th harmonic, numerical and • 1 analysis software (PqaSoft) percentage indication of harmonic content of both voltage and current. THD, THD odd, THD even and • 1 instruction manual (English, Italian & Spanish) Compulsory separate insurance is required. single harmonic measurement.
MET
ELECTRICAL INSTALLATION SAFETY TESTERS
Code
Description
Measurement Type
MI-3100-SE
Eurotest EASI
AUTOSEQUENCE ® Testing Sequences Voltage
Auto TT (U, Zln, Zs, Uc), TN/RCD (U, Zln, Zs, Rpe), TN ✔ (U, Zln, Zlpe, Rpe) 3 phase TRMS & Frequency & Phase Sequence <550Vac Voltage Cat, 1000VDC (CatII), 600V cat III, 300V cat IV ✔ Earth Bond / Continuity Test Current 7 mA 2-wire & 200 mA 2-wire ✔ RPE 200 mA 3-wire ✔ Insulation Resistance Test Voltages 50-1000V Leakage Current Differential Leakage (optional clamp) ✘ Z Line / Loop Impedance Zline, Zloop, Zs(rcd), Zref,ΔU%,Fuse Tables ✔ RCD RCD type AC,A, F,Uc, (t), I Ramp, Auto ✔ RCD type B,B+ ✘ RCD 3-Phase ✔ Earth / Ground Resistance Earth Resistance 2-wire, 3-wire ✔ 2-Clamps Earth Resistance ✘ Functional Power P,Q,PF / Cos ɸ,S, Harmonics, TRMS Current ✘ Harmonics ✘ Scope ✘ AC&DC Current & Load test ✘ PV Basic Isc, Uoc, Polarity, Module / String / PV Insulation, Irradiance, Module Temp, I-V Curve, STC Extrapolation, ✘ Umpp/Impp, PmaxRS, AC/DC efficiency PSU Battery Powered + charger 115/230V ✔ Scope mode On-line scope mode ✘ Single / Continuous mode ✘ Communication Port USB USB / RS232 / Bluetooth / Android App 1/1/-/1 Internal memory Internal memory ✔ AC/DC - Current Clamp DC - Current Clamp / Generator Current Clamp / AC ✘ Leakage Current Clamp / PV Pyranometer / Reference Standard Set Test leads / Probes / Crocodile clips 3/3/3 2.5kV Test leads ✘ Earth Test set ✘ Soft carrying bag Schuko-plug test cable Plug Commander PC Software Calibration Cerificate PV Safety Probe & Cell reference & temperature probe PV MC3/MC4 male/female adapters AC/DC Current clamp Accessories
Code
A1018-M
Current clamp (Low range,leakage)
A1401
Tip commander (3-wire)
A1391
AC/DC Current clamp
A2026
Earth 20m set, 3 wire
MET
✔ 1.5m ✘ ✔ ✔ ✘ ✘ ✘
MI-3102H-BT
MI-3108
MI-3125-BT
Eurotest XE 2.5 kV ✔
Eurotest PV ✘
Eurotest COMBO ✘
<550Vac ✔ ✔ ✔ 50-2500V ✔ ✔ ✔ ✘ ✔ ✔ ✔ ✔ ✘ ✘ ✔
<550Vac ✔ ✔ ✘ 50-1000V ✘ ✔ ✔ ✔ ✘ ✔ ✘ ✔ to 11nth ✔ ✘
<550Vac <600V ✔ ✘ 50-1000V ✘ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘
✘
✔
✘
✔ ✘ ✘ 1/1/1/1 ✔
✔ ✔ ✔ 1/1/o/o ✔
✔ ✘ ✘ 1/1/1/1 ✔
✘ (Optional)
✔
✘
3/3/4 2 4m Test lead 3 x 20mTest lead 2 x Test rod ✔ X 1.5m ✔ ✔ ✘ ✘ ✘
3/4/4 ✘
3/3/3 ✘
✘
✘
2 1.5m ✘ ✔ ✔ ✔ ✔ ✔
1.5m ✘ ✔ ✔ ✘ ✘ ✘
A1153
Test lead, black, 20m
A1378
Eurotest PV Remote for MI-3108
A1436
Bluetooth dongle
9
DIGITAL ELECTRICAL COMPLIANCE TEST CASE Electricians electrical compliance test case, instruments required to test for issue of electrical compliance certificates
Code
Case Includes
CK-1
2751IN TEL1-3 MY60 SSP-8030 MS8907
Digital Insulation Tester RCD Tester Digital Multimeter Digital Phase Indicator Voltage Finder
(Page 394) (Page 394) (Page 395) (Page 404) (Page 403)
20MHZ HANDHELD DUAL CHANNEL SCOPE METER DMM Functions
Technical Specifications
DCV/ACV: 600m/6/60/600/1000V(750V), ±1.0% / 1.2% DCA/ACA: 6/60m/600m/6A, ±1.2% / 2.0% OHM: 600/6k/60k/600k/6M/60MΩ, ±1.2%. CAP: 6n/60n/600n/6µ/60µ/600µF, ±4.0% Audible continuity & diode test
Bandwidth: DC ~ 25MHz, dual channels Real-time Sampling Rate: 125M Sa/s Equivalent Sampling Rate: 25G Sa/s Horizontal sensitivity: 10ns/div-50s/div, ±0.01% Record Length: 2 x 512k Vertical sensitivity: 5mV/div-5V/div, ±5% Vertical resolution: 8 bit Rise time: 14ns Trigger type: Edge, Pulse width, Video, Alternate Max. input voltage: 400V DC + AC peak Input impedance: 1MΩ //21pF Waveform maths: +, -, *, /, FFT Auto measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vmid,Vamp, Vavg, Vrms, +Overshoot, -Overshoot, Freq, Period, Risetime, Falltime, +Width, -Width, ±delay, ±duty Cursor measurement: V, T Frequency counter: 6 digits Interface: USB2.0 Host Storage (interval/USB): 10 waveforms + 10 setups Display: 5.7 inch 320 x 240 pixels color LCD
Code
DS1022M
• DMM built with dual-channel DSO, colour LCD display • Automatic waveform and status configuration • Edge, Pulse, Video and Alternate triggers • Waveform maths & FFT, auto & cursor measurement • Display zone for precision waveform analysis • Screen copy, waveform recording and replay
• Built-in 6 digits frequency counter • USB interface, system software upgradeable • AC power (100~240V, 50/60Hz) or batteries • Dimensions & weight: 268 x 168 x 60mm, approx 1.8kgs • Accessories: AC adaptor, interface wire & software, test leads & probes
SAFETY GLOVES & MATS CUST.GI
CE Approved VPG90
Test V
2500V
5kV
10kV
20kV
30kV
Size
Code
Code
Code
Code
Code
8
GI2,5-8
GI5-8
GI10-8
GI20-8
GI30-8
9
GI2,5-9
GI5-9
GI10-9
GI20-9
GI30-9
10
GI2,5-10
GI5-10
GI10-10
GI20-10
GI30-10
11
GI2,5-11
GI5-11
GI10-11
GI20-11
GI30-11
User V
Accessories
500V
1kV
7.5kV
10
26.5kV
Protective plastic case for gloves
CUST.GI
Pneumatic Tester. This tester inflates the gloves and you can detect
VPG90
any perforation on the dielectric of the gloves IRC-3
17kV
26,5kV Insulated Rubber Safety Mat - 3mm thick x 1 m wide – priced per metre 3mm x 1 metre (w). Voltage test 30000V, max use voltage 26500V
MET
IRC-3
HIGH VOLTAGE TEST EQUIPMENT
High Voltage Proximity Detector
High Voltage Multifunction Phasing Sticks
• Lightweight • Designed for maximum safety • Carry case included
Code
277HP
Code
System Voltage
PC-7K The 277HP is a voltage (non contact) proximity detector for checking for the presence of AC voltag- PC-11K es in cables, wall outlets, fuses etc. AC voltages PC-44K from 50V to 132kV. • 2 selectable ranges:- LOW: - 50 - 1.5kV HIGH: - 1.5kV - 132kV • Power consumption OFF: - Less than 5μA ON: - Less than 40mA • Test Button: Test the system prior to measurement • Operating Temperature :- 0°C - 40°C • Dimensions:- (LxWxØ) 318x75x71mm • Power Source 1 x 9V (6F22) battery • Std's: EN61326-1 / EN61000-4-2 / EN61000-4-3 • Supplied with:- Manual, Battery, Carry case.
Accessories - Hotsticks Code
HS-*
Standards approval to IEC 62193. Rated at 100kV per 300mm / 5 minutes *Add Length to Code 120 = 1200mm long 800 = 800mm long 500 = 500mm long
Disconnect Hook
HOK-HS166
Maximum Voltage
9kV 15kV 55kV
8kV 12kV 48kV
Accessories - (for all models)
Cone Tips 30mm Cone Tips 70mm
Specifications
Response Time <1 sec
PC-7K
Code
Code
Description
PC-BK
90º bends (pair)
PC-C1K
30mm cone tips (pair)
PC-C2K
70mm cone tips (pair)
PC-11K
PC-44K
±3.95MΩ ±6.78MΩ ±27MΩ 1.2kV 1.2kV 1.2kV 1.5kV 1.5kV 1.5kV 765mm 765mm 765mm 340mm 340mm 760mm 1105mm 1105mm 1525mm ±1.2kg ±1.2kg ±1.5kg Composite material with polyurethane Front end: Fibre glass wound tubing -25°C to +55°C Operating humidity: 20 to 96% RH
Total resistance Neon threshold Neon fully lit @ Handle length Front end length Total length Total weight Handle material Operating temp.
Personal Safety Voltage Detector
Fuse Extractor
ADP-HS120
Full Scale Voltage
6.6kV 11kV 44kV
Code
286-SVD
Sensing Distance
800mm @ 11,4kV 50/60Hz
Volume
70dB @ 1m
Size
59 x 56 x 18mm
When approaching a high voltage source the buzzer will sound and LED will flash to alert the user. Waterproof Design.
Short Circuiting and Grounding
Short circuiting and grounding equipment for electrical cabinets and MV installations with universal contact clamps
Code
Description
MT/BM-50 MT/BM-95
Standard type. lcc: 13,7kA eff / 0.25s With short circuit cables section 25mm2 With short circuit cables section 50mm2 Icc: 13kA eff / 0.5s With short circuit cables section 95mm2 Icc: 24kA eff / 0.5s
MT/BM-25
MT/BM
Certificate complies to the International Standard CEI EN 61230 (CEI IEC 1230)
Fuse Extraction Rod EF30
EF30
Insulating Rod for fuse extraction and installation on systems with working voltages up to 30kV
Phasing and Voltage Detector of MV Presence / Absence by Visual Signalling (Indoor Use) Code RMB36 RMB36
c/w case
MET
Description
• Double poles voltage detector • Phase relationship detector • HV fuse tester • Operating range: 5/36 kV • Total length of each rod complete with antenna: 1,17m
11
VOLTAGE TESTERS
Code
CAT III 600V
901
• DCVoltage:120-220-440-750V • ACVoltage:125-220-380-500-750V • Cable: 1m in length • Double insulated handles against electricity & heat. Neon indication for voltage present & bright indicator for voltage range.
CAT III 1000V
MV-400
• Test Voltage AC/DC: 6-400VDC or AC RMS • Polarity test. • Max Testing Time: 30sec • LED Bargraph Display
MV3
• Test Voltage AC/DC: 6-400VDC or AC RMS • Polarity test. • Max Testing Time: 30sec • LED Bargraph Display
BESTEST 8
• Testing Voltage AC & DC: 6-400VAC/DC • Phase indication via LED • Polarity via LED • Test Earth Leakage CB • Continuity/Semi-conductor test 0-1MΩ. • Max Testing Time: 30sec
Magnetic Field Tester
Code
GK12A
MS8211
• AC/DC Voltage measurement: 10-690VAC/DC • Rotary field indication • Continuity test • Order batteries separately
• DC V: 600V, AC V: 600V • Diode & Continuity Test • OHM: 200Ω to 20MΩ • Non-contact AC voltage detection • Auto Ranging. Data/Max value hold
Voltage Finders
Code
MS8900
• Non contact voltage detection • 5mm Sensing range • Buzzer / LED indication • 100 - 240VAC
MS8907
• Non contact voltage detection • 5mm Sensing range • Buzzer / LED indication • Work light (torch) • 50 - 1000VAC • Low Battery Indication
Battery Testers
Code
Code
12
BT-12
• 12VDC battery analyser • Voltage test: 8-25VDC • On load battery test Evaluates battery’s ability to crank engine • Charging system test • Starter motor test
MD-1055
BESTEST 18 • AC Voltage: Contact Test 100-500VAC • Non Contact Test: 70-10000VAC • Continuity Check: 0-50MΩ • Microwave leakage detection, 5mW sq cm • Polarity test: 1.2-36VDC
M38900
• 100 - 240VAC • 2xAAA bat(incl.) • Fits in your pocket • Easy to use, just touch the tip to an outlet or cord, when it glows red, you know there’s voltage
• Multi-functional • LED voltage levels indication for 24 - 1000V • Continuity Buzzer, Phase and rotating field test • Diode Test, RCD Trip testing • Voltage: Cat III / 1000
MD-1150
• Contactless voltage detector • High performance LED torch • Continuity indication via lamp or buzzer
Automative Current Tester
• LCD Display for voltage testing up to 1000V • Continuity testing up to 2000Ω • Data Hold • Auto AC/DC recognition • Voltage: Cat III / 1000
MET
TESTBOY20
• AC Voltage: 100-500VAC • Contact Test
Maxi-Blade
CF-02
• 3 in 1 Battery/Bulb/Fuse tester • To test batteriestypes: AA, AAA, C, D, 9V, E, I, SV & PV
• Battery Tester • Car lighter plug • 5 indicators: Low/Fair/Normal/ Full & Over
• Testing of solenoids and relays • The test lamp illuminates when a magnetic field is present • No metallic contact is required • Responds to AC and DC magnetic fields and permanent magnets
BESTEST 7
BT-6
AT-953
AC-8M
Mini-Blade
CF-02S
• Measuring range: 20A @ 48VAC/DC (10sec. max) • Resolution: 10mA • Cable length: 75cm • Plugs straight into automotive fuse holder in car
MD-115
• Non-contact voltage tester that features a visual display indicator. • Detects 12V to 1000VAC • Voltage: Cat III / 1000
TEST EQUIPMENT
Digital Phase Indicator
Phase Sequence Indicator
Phase Sequence Indicator
Capacitance Meter
SMD Tester
Multi-Tester
TES-1500
MS8910
MS319
Non Contact
ST-850 • Check phase sequence • Open phase check • Large alligator clips allow for easy connection & testing • 90-600VAC range • 50/60Hz • Instruction manual • Carrying case
• Designed to check the presence of open phase and phase sequence by LED and buzzer at the same time Specifications • Operational Voltage: 200-480V AC three phase • Time limit for continuous use: 60 minutes max. at 200V AC. 4 minutes max. at 480V AC • Frequency range: 20Hz-400Hz • Accessories: double insulated cords, probes for test leads
Electronic Test Kit
ETK03C
890PR
SSP-8030
• Non contact phase sequence testing • Open phase testing • Led and buzzer indication • Operational Voltage: 75-1000VAC 3PH • Frequency Range: 45-65Hz • Magnetic mounting bracket
Schuko Socket Outlet & RCD Tester
SCHUKI-2
• Fuse protection all ranges • Zero adjustment ±20pF • Direct insert jacks • 9 overlapping ranges • Test leads & battery • Dual slope intergration • Display rate 2 per second • Test frequencies per range: 800Hz: 200pf - 2µF 80Hz: 20µF 8Hz: 200µF - 20000µF
• LCD display • Auto / Manual Range • Auto Power Off • Low battery indicator • Continuity / Diode Test • Ohms: 3kΩ - 30MΩ • Capacitance: 3nF-30mF • Weight: 300g • Size:189 x 91 x 31.5mm
• Easy Read Scale • Mirror Scale • Zero Ohms Adjust • Battery Test (1.5 / 9V) • Volts AC: 10V - 1000V • Volts DC: 2.5V - 1000V • Amp DC: 5ma - 10A • Ohms: 0 - 10MΩ
Schuko Socket Outlet Tester
CEE-adapter with Phase Rotation Indication - 3P+N+E
British Socket Outlet Tester
Meter + Engine Analyser
SCHUKI-3
TV400-*
MS6860E
MS8239D
* Add current rating to code: 16A, 32A • Confirms correct wiring • Indicates phase rotation • Can be used with SCHUKI-2 to test RCD
• Designed to test 110V or 220V sockets in 1 easy step • Clear LED indication of wiring errors including missing earth, live/earth reverse, live/neutral reverse, missing neutral
• Backlit LCD display • Dwell Test 4 / 6 / 8 cylinder • Tach Test 4 / 6 / 8 cylinder • Auto ranging • Max data hold
• Confirms correct wiring • Confirms correct Blister Pack Contains: of outlet wiring of outlet GK7: Non-contact voltage tester • Adj. RCD triggering • Output via glowing with LED and audio alarm; Voltage • Trip settings: 10-500mA lamps Range: 50 - 1000VAC 50-500Hz • Size: 100 x 50 x 75mm EM306B: Digital Clamp meter Continuity test, Auto zero, Diode check, Data hold, Voltage Range: 300VAC/ DC, AC Current 20-400A, Resistance: 2kΩ-200kΩ DT830: Digital multimeter; Continuity test, Diode check Voltage range: 200mV-600VDC / 200-600VAC, Current Range: 2000µA-10ADC Resistance: 200Ω-2MΩ Batteries Included
MET
• VAC: 200mV - 600V • VDC: 200mV - 600V • AC Current: 10A • DC Current: 10A • Resistance: 200Ω - 20MΩ
13
TEST EQUIPMENT
Sound Level Calibrator
SC-05
Anemometer
Laser Tachometer
MS6252A
MS6208B
Contact Tachometer Digital Sound Level
MS6208A
MS6700
• Backlit LCD display • 94db and 114db • Backlit LCD display • Backlit LCD display • Backlit LCD display calibration at 1kHz. • Bargraph indication • Non Contact measurement • Contact measurement • Max data hold • Over/Under range indication • Accurate & simple to use • Max/Min & Data hold • Auto power off • Auto power off • Fits 1/2inch diameter • Low battery indication • Max/Min/Avg Data hold • Max/Min/Avg Data hold • Fast/Slow selection • Auto/Manual ranging microphone • Air Flow Calculation • Data logging • Data Logging • Auto power off • Output Frequency: • Auto power off • Low battery indication • Low battery indication • Bargraph indication 1000HZ, ±4% Meter/sec: 0.8 - 30m/s Range: 50 - 99999RPM • Low battery indication • Reference Temp: Feet/min: 80 - 5900 ft/m Measure Distance: Range: 50 - 19999RPM • Data logging 16000 records >23°C (73°F) Kilometre/h: 1.4-108km/h 50 - 250mm • Date/Time display • Atmospheric pressure: Mile/h 0.9-67mi/h Range: 30dB - 130dB >1013mbar (760mm of Hg) Knots 0.8-58knots/h Resolution: 0.1dB • Relative humidity: >35%RH Freq range: 30Hz - 8KHz • Accuracy of sound pressure level understated reference conditions ±0.5db
CO Analyser Code
Lightmeter
MS6610 • Measures 0-50 000 Lux for wide range of use • Auto zero adjustment • High Accuracy • Data Hold & separate sensor allow easy measurement from the optimal position • Range: 2000/20 000/ 50 000 Lux • Accuracy: ±5% • Resolution: 1 Lux
Coating Thickness Tester Code TESTBOY70
TES-1372
• CO range: 0-900ppm (CO) • Max hold with time stamp • Alarm level setting & replaceable sensor • Automatic zero on start-up • Accuracy ± 5% of reading or ±2ppm - whichever is greater • Auto power off & back-light for display
• Range: 0-1000µm/ 0-40mil • Size: 158 x 74 x 31mm • c/w two probes • Measures non-magnetic coatings on steel or iron • Also measures insulating coatings on non-magnetic metals
TEST PROBES
FC-A23 Code
ASL2
AL-12
AL-14
Car Fuse Adapter
Black & Red Insulated Crocodile Clips (pair)
PLSS150R Red PLSS150B Black
/R
Lead with 4mm Plug to fit Digital Multimeters and other test probes.
/BK
SP1322-R Red SP1322-BK Black
Banana Plugs 4mm Male Plug with plastic handle
FC-170A KSY-6005B
Black and Red Test Probe (pair)
Black shaft with single pointed gripping jaws
AL-25
14
AL-26
CF-01
CF-01S
KSY-6005R
FC-A15
MAXI-Blade
MINI-Blade
Red shaft with single pointed gripping jaws
Black and Red Test Clips (pair)
MET
TEST EQUIPMENT pH/ORP/mV Temperature Meter IP57
ORP Probe to be ordered separately
Code ORP Range Resolution PH Range Resolution Compensation Calibration pH Temp Range Resolution Temp Display Kit Includes
Accessories
Code Voltage Source Current Source Loop Power DCV Measure DCmA Measure Features
7011
Pen Type pH Tester
pH Meter Kit
Combustable Gas Detector
PP201
MS6310
Complete Kit
ORP Probe to be ordered separately
MP-103
PH5011A
• Easily find gas leaks • High sensitivity • Warm-up time: 2mins • Respnse time: 2sec Gases Detected • Natural gas • Methane • Ethane • Propane • Butane • Acetone • Alcohol • Ammonia • Steam • Gasoline • Jet Fuel • Hydrogen • Carbon Monoxide • PH Probe: 7000EP4 • Lacquer • Buffer Solution 4.00 (50cc): B-4 • Buffer Solution 4.00 (50cc): B-4 • Solvents • ORP Probe: MP-103-ORP • ORP Probe: 7000EO • Buffer Solution 4.00 (50cc): B-4 • Buffer Solution 7.00 (50cc): B-7 • Buffer Solution 7.00 (50cc): B-7 • Thinners • Napthta • Buffer Solution 4.00 (50cc): B-4 • Buffer Solution 7.00 (50cc): B-7 • Buffer Solution 7.00 (50cc): B-7 pH: 0 - 14 0.01pH ATC: 0 - 100°C • Carry Case • Screwdriver • Battery • Buffer solution
pH: 0 - 14 0.01pH MTC: 0 - 100°C 4.00, 7.00, 10.00 • Carry Case • pH Electrode • Meter Solution 4&7 • Batteries • Distilled water
-1000 - 1000mV 1mV pH: 0 - 16 0.01pH ATC: 0 - 90°C 4.00, 7.00, 10.01 0 - 90°C 0.1°C °F / °C - max/min reading hold • Carry Case • Meter Solution 4&7 • Soaking Solution • Batteries
± 1999mV 1mV pH: 0 - 14 0.01pH ATC: 0 - 100°C 4.00, 7.00, 10.00 0 - 100°C 0.1°C °F / °C • Carry Case •Electrode Holder • Meter Solution 4&7 • Batteries •Temp Probe • pH Electrode
mA/V Calibrator
Thermocouple Calibrator
4-20mA Simulator
MS7221
MS7220
603
601K
601J
• Simulator output ranges of 4mA, 12mA & 20mA from transmitter • Ideal for calibration standard & used as a current source.
Range: • 0°C (32°F) • 100°C (212°F) • 500°C (932°F) • 1000°C (1832°F) • Accuracy: ±0.5°C (+1°F) • Checking type thermocouples and calibrating process indicators / controllers
Range: • 0°C (32°F) • 100°C (212°F) • 200°C (392°F) • 400°C (752°F) • Accuracy: ±0.5°C (+1°F) • Checking type thermocouples and calibrating process indicators / controllers
0-100mV, 0-10V ± 0.02% 0-24mA ± 0.015% 24VDC 0-100mV, 0-10V ± 0.02% 0-24mA ±0.015% • Accurately measure loop currents • Measure voltage from process and PLC's • Source or Simulate 22mA loop currents • Similtaneous 24V loop supply and current measurement
Measure and calibrate thermocouples J,K,T,E,R,S,B,N Input/Outputs: ˗200°C - 1800°C ˗328°F - 3272°F 10mV - 75mV Resolution: 0.1°C / 0.01mV Acurracy: ±0.3°C/0.6°F / 0.02%(Mv) • Precision source for calibrating and mearuring thermocouples
MET
K & J Simulators
15
Multimeter True RMS & Data Logger
PROVA 803
• Dual Input Channels • Dual Channels Measurement similar to a Dual Channels DSO (V+V/V+A) • Hz+Duty Cycle Dual Display • Standalone Data Logging of 10 708 Records both Channels • RS-232C Interface, application software • Bandwidth 10kHz (max.) • Basic Accuracy 0.04% (DC) and 0.2% (AC)
AC/DC Power Clamp Meter
PROVA 901
TES-3063
• Dual Input Channels • Compare Voltage at two different locations • Read Voltage and Current at the same time • Standalone Data Logging of 10 708 Records both Channels • Optical Isolated RS-232C ASCII Interface, application software • Bandwidth 200kHz • Basic Accuracy 0.02% (DC) and 0.1% (AC) DCV/ACV: 60.000mV-1000.0V DCA/ACA: 600.00µA-10.000A Resistance: 999.99Ω - 40MΩ Capacitance: 60.00nF-600.0µF Frequency: 1Hz-2.000MHz Duty-Cycle and Diode Test Continuity Test
• 1600 Point Data logging function • True Power/Apparent Power/Power Factor Measurement • True RMS. V, A, W • 4 digits with 2” LCD Display • MIN/MAX/AVG Measurement • Amp/Voltage Frequency Measurement • PEAK HOLD Detector • 3 Phase adaptor for 3 phase power measurement • Peak hold/Data hold
Temperature/Humidity & Air Pressure Datalogger
Sound Level Datalogger
DC Current or Voltage Datalogger
ST-174B
ST-173
• Manual & Automatic start mode • Alarm set-up & indication • Recording & low battery indication • USB port for data traffic & power • Status indication via Red/Yellow & Green LED
• Max - Min measurement • Alarm value set-up / A&C Weighting • Normal & Peak Mode • Fast and slow response • Manual/Auto Mode
Data memory: 10 000 readings Sampling Rate: 1 min to 18 Hrs Data Output: USB Temp Range: -40 to 70°C/ -40° to 158°F Resolution: 0.1°C/0.1°F Humidity Range: 0 to 100%RH Resolution: 0.1%RH Air Pressure: 950 to 1050hPa Resolution: 0.1hPa
Sampling Rate: 1sec - 24hr Accuracy: ±1.4db Freq Range: 31.5Hz to 8kHz Dynamic Range: 50db Level Ranges: Auto: 30db - 130db Time Weighting: Fast(125ms),slow(1s) Reading Memory:129920 points for dBA or dBC Data Output: USB Data
DCV/ACV: 60.000mV-1000.0V DCA/ACA: 600.00µA-10.000A Resistance: 999.99Ω Capacitance: 60.00nF-600.0µF Frequency: 1.000Hz-2MHz Duty-Cycle and Diode Test Continuity Test
16
TEST EQUIPMENT
PC Adaptor & Software
TES-3064 (PC adaptor)
• To down load the data into the computer from datalogging memory of TES-3063 • Communicates with PC via RS-232 for further data analysis and reports
RS232
Ranges • Volt: 10V - 600VAC
• Reactive: 0.01 - 120KVAr
• Active power: 0.1 - 120KW
• PF (ind): 0.3 - 1
• PF (cap): 0.3 - 1
• Amp: 2mA-200A
• Apparent: 0.01 - 120KVA
ST-171A
ST-171V
AC Current & Voltage Datalogger
ST-175CV1
• Freely selectable measuring cycle • USB Data Download • Alarm display if parameters exceeded
• True RMS reading • USB-PC Interface (c/w software) • Single channel input • c/w Probes for 1PH, current and voltage measurements
Status display: 2 LEDs DC Voltage Range: 0 to 30VDC Accuracy: ±0.5%+1 Memory: 32000 readings Sampling Rate: 400Hz to 24 hrs
Current: 10 - 200A Voltage: 10 - 600VAC Sampling Rate: 1sec - 24hr Reading Memory: Up to 100 000
Status display: 2 LEDs Current Range: 4 to 20m ADC Accuracy: ±1%/±1Count Memory: 32000 readings Sampling Rate: 1sec - 24hrs
MET
TEST EQUIPMENT
Infrared Thermometers
3-in-1
Pocket size
Code
MS6520A
MS6530A
IR-88
Temperature Meters
IR-99
MS6511
ST-612
Range
˗20°C - 300°C
˗20°C - 850°C
-20°C to 270°C
IR:-35°C to 260°C Thermistor: -40°C to 260°C Clamp: -40°C to 200°C
Resolution
± 0.1°CF
± 0.1°C/F
1°C
0.1°C
K: ˗200°C - 1372°C J: ˗210°C - 1200°C -50° to 1300°C T: ˗250°C - 400°C E: ˗150°C - 1000°C 0.1°C/F ± 0,1°C / 1°C
Optical Resolution
10:1
12:1
6:1
1:1 spot size
-
-
-
Basic Accuracy Emissivity Sensor
Battery
Features
± 0.5°C/F
± 0.1°CF
0,95
0,95 ―
1 X 9V (Incl) • Backlit LCD display • Read hold • Max/Min/AVG display • Low battery display • Laser pointer • °C / °F
―
1 X 9V (Incl) • Backlit LCD display • Read hold • Max/Min/AVG Differential display • Low battery display • Laser pointer • °C / °F
±2% or ±2°C
±2% of Reading
Fixed at 0.95%
Adjustable 0,1 - 1,0
1.5V AAA Battery x 2 (Incl.) 3V CR2032 Lithium (3 in 1) IR Thermometer Laser targeting with Thermistor Probe and Data & max hold clamp. User selectable °C Auto Power Off or °F. Data Hold and Auto User selectable °C or °F Power Off. Max, Min record Low Battery indication Response time: <1 sec Response time: <1 sec
Humidity & Temp Meters
Moisture Meter
0.5°C/F
± 0,5% of reading
-
-
-
-
K Type included
9V Battery (Incl.)
TC Types: K, J, T, E Large display Max/Min/Data hold Data & max hold T1-T2 modes Auto power off Dual thermocouple °C / °F input. Scan function User selectable °C or °F
K Type Thermocouples
Laser & Probe
Bead Probe
Code
TH812
MS6508
Range
Humidity: 0% - 100%
Humidity: 0% - 100%
Resolution
Humidity: 0,1%RH
Humidity: 0,1%RH
Sensor
Humidity: Capacitive
Humidity: Capacitive
Features
Dew point and Wet-bulb temperature calculation. Max/Min Values Data Hold Auto Power off °C or °F display switch
Dual 4 digit LCD display Data logging up to 99 measures Dew point and Wet-bulb temperature calculation. Max/Min value measurement Data hold, Auto power Off °C or °F Display Switch
Temperature: 0 - 50°C Temperature: 0,1°C Temperature: NTC
Temperature: -20 - 60°C Temperature: 0,1°C Temperature: NTC
MET
EM4807
TPK-01
Measure moisture level in paper/cardboard, wood & hardened material (mortor/concrete/ plaster). Measure ambient temperature. Built in torch. Wood: 6-42% Resolution: 1% Building Material: 0.2-2% Temperature: 0-40˚C/ 32-99˚F Battery included
Measures surface or air temperatures to 260°C (500°F). 1.2m long wire has an industry standard miniature connector plug.
TPK-03
TPK-04
TPK-03: Immersion Probe General purpose needle type with stainless sheath. Use for measurements up to 800°C (1472°F) TPK-04: Surface Probe Miniature, fast response probe, with 800°C (1472°F) max. surface temperature. Ideal for measuring the surface temperature of small electronic parts.
17
DISPLAY UNITS & CABINETS
Code
AC/DC DISPLAY CABINET
Description
Choice of 3 variations: 1 . Hand tools and meters
DISPLAY MASTECH-L
DISPLAY MASTECH-S
Large display cabinet containting a
Small display cabinet containting a
selection of Mastech products
selection of Mastech products
600(W) x 380(D) x 1800(H)
600(W) x 380(D) x 800(H)
2 . Power tools 3 . Combination of 1 & 2 Size
1200(W) x 440(D) x 2000(H)
Infrared / Ultrasonic Distance
DISTANCE MEASURERS & DETECTORS Detector & Distance 5 in 1
Voltage / Metal / Wood Detector
Laser Distance Meter Tripod mountable
JT-60 • Infrared / Ultrasonic measuring meter • Designed for instant and accurate distance and acreage measurement • Two measuring modes: receiver alone to max 18m (by ultrasonic) and receiver to target max 75m (by infrared/ultrasonic) • Memory for 5 measurements • Built-in software for field calibration by user
18
EM60 • Distance Measurement: 0.4 - 18 metre • Accuracy: approx. 0.5% + 1 digit • Resolution: 0.01 metre
Detection: • Stud - Wood stud 30 x 30mm: ≤14mm • Metal - Iron pipe dia. 20mm: ≤25mm • AC: 90-250VAC@50-65Hz: ≤5cm • Calculates area, volume and does computation of distance • Size: 160 x 64 x 46mm • Battery: 9V included
MVS-168A
Detection:
• Stud - Wood stud 30 x 30mm: ≤10mm • Metal - Copper pipe dia.15mm: ≤24mm • AC:90-250VAC @ 50-60Hz: ≤35mm • Sensitivity can be adjusted • Can be used to accurately detect the position of pipes, AC voltage and wooden studs • Battery: 9V included
MET
LM50
0.1 - 50M 4 x AAA (incl.)
LM80
0.1 - 80M 2 x AA (incl.)
• Accuracy: ± 2mm • Smallest unit displayed: 1mm • Laser Class2 • Battery life: Up to 10 000 single measurements • Pythagoras function for measuring height of an object • Area and volume measurements • Addition and subtraction function • Reflector plate included
LDM-100 0.05 - 50M 2 x AAA (incl.)
• Accuracy: ± 1.5mm • Smallest unit displayed: 1mm • Laser Class2 • Battery life: Up to 4000 single measurements • Area & Volume calculations • Pythagoras function for measuring height of an object • Addition and subtraction function
Standard Measure Tapes
LD-10NO7X
10 meter Auto-rolling steel tape
TM-3M
MEASURING EQUIPMENT
Fibre Glass
Digital
- with spike for accuracy
LD-SX501E
TM-5M
3 meter 5 meter Auto-rolling steel tape
Digital display - 5 meter Memory backlight Dual system measurement (metric/imperial)
TM-20M
TM-50M
JC-306
20 meter 50 meter Manual rolling
JC-506
30 meter 50 meter Manual rolling
Laser Levels & Line Generators
Code Description Accuracy Features
Code Description Accuracy Features
Code
LD-SL08 Self levelling laser 0.5mm per meter • Adjustable base • Lock system with on/off switch • 635nm laser generator
LD-SC2
Rotary laser ± 5mm per 10 meter • Auto Rotating beam • Portable, suitable for construction sites • Power: 6VDC
LD-LS10
Three laser line generator ± 1mm per meter • Self leveling • 3 Directional beams
LD-LS12
LD-LS15
Laser line generator ± 2mm per meter • Ultra compact • Vertical & horizontal level
Mini laser level ± 2mm per meter • Magnetic base with mini tripod
Laser Spirit Levels (with horizontal laser beam/cross line)
LD-SL01
LS8-1
LS7
Standard
Electronic Inductive
LD-LS05JD
Self levelling laser ± 1mm per meter • Professional tripod • c/w carry case • Power: 3VDC
LD-LS03S
Laser level with magnetic base ± 2mm per meter • Lightweight magnetic base • Vertical and horizontal
Angle finder with laser ± 1mm per meter • Analogue angle finder • Includes carry bag
Digital Vernier
Digital Outside Micrometer
SB168101-8
SB168163-1
0-200mm - Large Display
0-25mm
MET
19
ELECTRONIC EDUCATIONAL EQUIPMENT • Body material ABS • Interconnection Clips material Alloy of Silver and Nickel • Easy combination & Expandable
Advanced Solderless Breadboards
The best tool to complete the prototyping & testing for your electronic circuits
AD101 AD01 AD102
AD11
AD10
Code
Dimensions L xW xH
TiePoints
AD101 AD102 AD10 AD01 AD11 AD12 UIB-34 GL-24
81 x 52 x 9 81 x 62 x 9 81 x 30 x 19 83 x 118 x 9 83 x 147 x 19 184 x 168 x 24 230 x 255 x 20 224 x 150 x 20
408 456 10 948 958 1906 2320 1680
AD12
Interconnected 6 12 Clip Clip 60 60 0 142 142 284 – –
2 4 0 4 4 8 – –
24 Clip
PSB-01
– – – – – – 384 256
– – – – – – 16 16
SWS-01 SWS-02 LP-2800 LP-540H
LP-2800
Description
IC Capacity 14 Pins
Binding Post
– – – – – – 27 18
0 0 5 0 5 5 4 3
Back-Plate Sticker Sticker Sticker Sticker Sticker ABS plastic Plastic Stand Plastic Stand
• Testing TTL, DTL, HTL, CMOS and MOS • Displaying pulse presence and logic states • Catching pulse to 10ns or pulse trains to 50MHz • Input overvoltage protection • Input impedance: 1MΩ • Width of min. pulse: 30ns • Max. input frequency: 17 MHz • Logic 1 (red LED Lights) and then buzz 2.3V ± 0.2V 70% Vcc • Logic 0 (green LED lights) and then buzz 0.8V ± 0.2V 30% Vcc
LP-540H - Logic Pulser
Wire set with banana socket
Wire set without banana socket Logic Probe
Logic Pulser
Other electronic educational kit and project circuit boards available. Contact your nearest AC/DC Dynamics distributor.
SWS-02
UIB-34
Specifications LP-2800 - Logic Probe
PSB-01
Power supply c/w all cables and 5DC output wires • Short circuit proof • DC output (1) DC + 5V, 1A – 5V, 500mA. Fixed (2) DC 0 to + 15V, 500mA Variable (3) DC 0 to – 15V, 500mA Variable • AC output (1) AC voltage: 12V-6V-0V-6V-12V, 60mA Fixed
Code
SWS-01
5 Connected 25 Connected Term Bus
1 2 0 2 2 4 – –
Accessories Code
GL-24
LP-540H
• For TTL, DTL, RTL, HTL, COMS and MOS • Producing 10uS pulse signal • Output current up to 100mA(pulse) • Sync input impedance: 1MΩ • Pulse width @ 100mA load 10µS • Output current: (1) pulser mode: 100mA sink/source (2) square wave output: 5mA sink/source
MAGNIFYING GLASSES
Code
20
ZD-10D
• Magnifying Glass with holding spring clips (x2) • Can be locked at a specific angle
TLE-1099
• Ø: 90mm • With illumination • Works on 2x1.5V AA batteries (not included)
MET
TLE-1094
• Power: 230VAC, 22W (T5) • Size of lens: 5” • Diopter/power: 5 Diopter • Colour: White
TLE-1104
• Head Magnifying Glass • Power: 1.8X, 2.3X, 3.7X, 4.8X
General
Semi-Professional
Kit Includes
• 2 x Radios
• 2 x Radio
• 2 x Wall chargers
• 2 x 800mA Batteries
• 6 x AAA rechargeable batteries
Code Channels
Transmission Power
• 1 x Belt clip
V FU C IBR N AL A C L TI O N
G5 XT (Kit)
G7 XT (Kit)
G9
PACIFIC IPX5
8 + 16 pre-programmed
8 PMR446, LPD69
8 PMR446, LPD69
57 International
PMR446
Dual Band
Dual Band
156 to 162MHz
38 CTCSS
38 CTCSS
38 CTCSS, 104 DCS
38 CTCSS, 104 DCS
3 rechargeable batteries 800mAh
Battery pack 800mAh
Battery pack 800mAh
Battery pack 800mAh
Up to 35hrs
Up to 18hrs
Up to 12hrs
Up to 12hrs
Backlit mutli-function LCD
Backlit multi-function LCD
Backlit multifunction LCD
Backlit multifunction LCD
PMR446 500mW ERP
PMR446 High (~500mW)
PMR446 High (~500mW)
5 Watt (1W/5W)
50 x 85 x 25mm
58 x 122 x 34mm
58 x 110 x 32mm
62 x 122 x 35mm
-20˚ to +55˚C
-20˚ to +55˚C
-20˚ to +55˚C
-15˚ to +55˚C
74g
123g
114g (without batteries)
137g
AAA Ni-MH
Autonomy 5/5/90 Display
• 1 x Rechargeable battery
charger
CTCSS & DCS Tones Operate with
• 1 x Desktop charger
• 1 x Dual desktop
be s a an a C ed BY OR us BA NIT O M
ER F AT OO W R P
• 1 x Radio
• 2 x Belt clip
• 2 x Belt clips
Professional Kit Includes
V FU C IBR N AL A C L TI O N
Blister Kit Includes
TWO WAY RADIO PMR 446
Dimensions (WxHxD)r Working Temp Weight
Features Scan, Vox, Keypad lock, Roger Beep, Battery Indicator.
Accessories
Code
Description Model
Code
Description Model
R72701
R72005
G5
G7, G9 & Pacific
Belt Clip
MW904
Wall Charger All
MA28-L
Belt Clip
ALG7
Microphone with Earphone All
PB-ATL/G7
Car Charger
G7, G9 & Pacific
Rechargeable Pack G7, G9 & Pacific
AE38
Throat Microphone PTT or finger PTT All
C785
Desktop Charger G7
SOLAR MODULE ANALYSER Solar Module Analyser Code
PROVA200
Description • • • •
Analyser
Voltage range: 0-60VDC Current range: 0-6A I-V Curve test for solar cell Maximum solar power (Pmax) search by Auto-scan (60V, 6A) • Maximum voltage (Vmaxp) at Pmax
MET
PROVA300XP Printer • Maximum current (Imaxp) at Pmax • Voltage at open circuit (Vopen) • Current at short circuit • Calculation of efficiency (%) • Manual single point test
21
TOOL CABINETS & WORKBENCHES
Tool Cabinets
• 1st drawer includes division boxes, other 3 drawers include dividers
Division Boxes
Dividers
ELS-274M
Code
ELS-276M
ELS-274MA
863H x 1070W x 515D 2 x 75H; 2 x 100H; 1 x 150H Blue
1333H x 1070W x 515D 4 x 150H Blue
863H x 1070W x 515D Size (mm) Drawers (included) 4 x 150H Blue Colour
ELS-276MA
1333H x 1070W x 515D 2 x 75H; 2 x 100H; 1 x 150H Blue
Mobile Tool Cabinets • 1st drawer includes 12 division boxes, other drawers have 3 compartments each 12 Free hanger hooks incl.
Code
Size (mm) Drawers (included) Colour
ELA-185M
1000H x 500W x 630D 1 x 100H; 4 x 150H Red
ELA-185MA
HL3103-A
950H x 960W x 570D 3 x 65H; 1 x 145H; 1 x 225H Stainless Steel
1480H x 500W x 630D 1 x 100H; 4 x 150H Red
Heavy Duty Workbenches • Load Capacity: 1000kg • Drawer Loading Capacity: 100kg
• Laminated Tops • Optional extra: Rack set WQ-62 & WQ-63
Perforated Rack Sets
Works with both heavy-duty and standard workbenches
WQ-62
605H x 1802W x 205D
Code
Size (mm)
WA-67A-1
800H x 1800W x 750D
WAT-6203A-1
800H x 1800W x 750D
WAS-64031A-1
800H x 1800W x 750D
Standard Workbenches • Load Capacity: 600kg • Drawer Loading Capacity: 60kg each • Laminated Tops • Optional extra: Rack set WQ-62 & WQ-63
Code
Size (mm)
22
WB-67F
800H x 1800W x 750D
WBT-6203F
800H x 1800W x 750D
MET
WBS-63021F
800H x 1800W x 750D
WQ-63
605H x 1802W x 325D 25H x 1795W x 300D
WBS-67041F
800H x 1800W x 750D
TRESTLES & PORTABLE WORK BENCHES
Height Adjustable Trestle
Portable Work Benches
OPEN
Code
Size (mm) Carrying Capacity
HL4020-H
HL4020-C
1055W x 475L x 800-920H 350kg/Pair
Trolleys
CLOSED
RWM-WB002
605W x 630D x 780H -
700W x 590L x 880H 200kg
TROLLEYS & MINI STEP LADDER Trolley for moving appliances up to 100kg
Plastic Step-Ladder
HL2031
HL5039
HL5040-D
HL3028
Service Cart Maximum load 30kg/level 715 x 465 x 250mm
Home Trolley (set of 2) Maximum load 100kg/set
Hand Trolley Maximum load 100kg 470 x 210 x 830(H)mm
Dimensions: Ø top 286mm, Ø bottom 435mm, (H) 425mm Maximum load : 300kg
Plastic Tool Boxes
TOOL BOXES
Steel Tool Boxes
Aluminium Tool Boxes
No tools supplied
SB210211
Code
Size (mm)
ZD-B1
485L x 245H x 215W
MJ-3083
SB210202
520L x 210H x 230W
484L x 165H x 154W
• 4 Drawers and top compartment Toolbox • On wheels • Lockable
Code
Size (mm)
Code
Size (mm)
SB210302 400L x 160H x 155W
SB210211
SB210206
668L x 386H x 316W
404L x 195H x 200W
MJ-3085
594L x 210H x 230W
Plastic 2-in-1 Combo
Steel 3-in-1 Combo
Steel Trolley Case
Plastic Trolley Case
MJ-COMBO
JF-A300ABC
MJ-2069
MJ-2055
670H x 345D x 580W
712H x 315D x 485W
750 x 487 x 493 500 x 245 x 255
581 x 297 x 266H 495 x 285 x 222H 460 x 204 x 181H
NB: Tools not supplied with tool boxes
MET
23
TOOLS
Belt Bag - 5pcs
Tool Back-Pack - 11pcs Code BM18122 (Kit)
! l Al ded lu c n
I
! l Al ded lu c n
Bag Code:
BM18030
BM18031
Code
Code
Bag Code:
Kit Code:
I
Code
BM18120
BM18031
BM18030 (pouch only)
• Screwdrivers: 1) FLAT 3 x 100mm 2) FLAT 4 x 100mm 3) PHILLIPS PH1 x 80mm • Combination Pliers 180mm (BM1310) • Stainless Steel Shears (BM1310
Kit Code:
BM18122
Tool Case with Wheels 72pcs Code
! l Al ded lu nc
I
Code
• VDE insulated bi-component tools • Screwdrivers: 2. x 75 4 x 100 5.5 x 125 6.5 x 150 8 x 175 PH0 x 60 PH1 x 80 PZ2 x 100 PZ3 x 150 • Nut Drivers: 10-13 • Combination Plier: 160mm • Side Cutter: 160mm
Belt Pouch
Code Size
Equipped with
24
19142 (Kit)
Screwdriver for slotted head screws) Futur II 0.5 x 3 x 100mm (1301030) Futur II 0.8 x 4 x 100mm (1301040) Futur II 1.2 x 6.5 x 150mm (1301065) Screwdriver for Philips screws “Philips” Futur II PH 1 x 75 (13021) “Philips” Futur II PH 2 x 100 (13022) Engineers pliers 190mm (AP0119N) Cable cutter 160mm (AP1017) Special electricians scissors (16011) Voltage tester (AV6104) Power disc cable puller (AV8902)
• Screwdrivers: 1) FLAT 3 x 100mm 2) FLAT 4 x 100mm 3) FLAT 5.5 x 125mm 4) PHILLIPS PH1 x 80mm 5) POZI PZ1 x 80mm • Combination Pliers 160mm • Stainless Steel Shears (BM1310) • Side Cutter 140mm • Voltage Tester • Measuring Tape 3m • Universal Knife
BM18403 (Kit)
• • • • • • • • • • • •
BM18400 (Case Only) Long Nose Plier: 200mm Flat Nose Plier: 160mm Water Pump Plier: 250mm Crimping Tool: isol 0.25 - 6mm2 Retaining Screwdriver: 4 x 125/PH1x 150 Voltage Tester: 220V-250 V, 3.5 x 100 Stainless Steel Scissors Cable Shear: 35mm2 Pocket Saw Cable Stripping Knife: 8 - 28mm Universal Knife Automatic Stripping Tool: 0.5 - 4mm2
1000V TOOL KITS
19140 (Empty Case)
200 x 100 x 200mm
BM18120 (Bag Only)
Equipped Imitation Leather Case
19231 (Kit)
19230 (Empty Case)
360 x 290 x 75mm
Engineers pliers 190mm (AP0119N) Long Nose pliers c/w straight jaws (AP0416N) Screwdriver for slotted head screws Futur II 0.5 x 3 x 100mm (1301030) Futur II 0.8 x 4 x 100mm (1301040) Futur II 1.2 x 6.5 x 150mm (1301065) Screwdriver for Philips screws “Philips” Futur II PH 1 x 75 (13021) “Philips” Futur II PH 2 x 100 (13022) “Pozidriv” Futur II PZ 1 x 75 (13031) “Pozidriv” Futur II Pz 2 x 100 (13032) Cable knife (AV3920) Insulated scissors (AV6720) Cable cutter 160mm (AP1017)
MET
• Measuring Tape: 3m • Rewinding Cord Marker (Chalk line) • Blue Chalk: 250g • Aluminium Spirit Level: 220mm • Adjustable Wrench • Allen Wrench Set: 9pcs • Panel Key • Double Ended wrench Set: 8pcs • Hammer: 300g • Chisel: 250g • Puncher Chisel: 250mm • HSS and Masonary Drill Set 19pcs
Equipped Resin Case
19172 (Kit)
19170 (Empty Case)
430 x 340 x 160mm
Engineers pliers 190mm (AP0119N) Long Nose pliers c/w straight jaws (AP0416N) Screwdriver for slotted head screws Futur II 0.5 x 3 x 100mm (1301030) Futur II 0.8 x 4 x 100mm (1301040) Futur II 1 x 5.5 x 125mm (1301055) Futur II 1.2 x 6.5 x 150mm (1301065) Screwdriver for Philips screws “Philips” Futur II PH 1 x 75 (13021) “Philips” Futur II PH 2 x 100 (13022) Cable cutter 160mm (AP1017) Special electricians scissors (16011) Power disc cable puller (AV8902) Panel Key (AV9310)
UTILITY BOXES
Code
Size (mm)
ZD-B2
295D x 220W x 76H
HL3021
460L x 330H x 75W
• Multi-compartment • Carry handle & shoulder strap
• Hands-free vest • Adjustable - 1 size fits all • Heavy Duty material & 3 Zippers
SB210402
SB210401
SB210404
SB210310
460L x 150H x 335W
• Belt-mount tool pouch • Universal • Nylon
EUROMARIO
ELECTRONIC TOOL KITS
Nylon Tool Bag
Code
156D x 92W x 53H
172D x 106W x 46H
26 Removable Compartments
TOOL BAGS
• Backpack style • Multi-compartment • Heavy-Duty material & 3 Zippers
Code
ZD-B4
ZD-B3
Aluminium Tool Case
ZD-963
ZD-902
ZD-906
ZD-907
TOOL KITS Tool Kit with spotlight and red/ amber blinking light c/w car plug. Uses 4 x size ‘C’ batteries (not included)
Code
PL-8985 13 Pieces
SB210120 39 Pieces
SB210123 48 Pieces
Telecoms Tool Kit Kit Includes: • RJ11/45 Crimping Tool • RJ11, 12, 45 connectors • Network cable tester • Cable stripper • Impact insertion tool
Code
SB210112 63 Pieces
SB003017 10 Pieces
MET
ZD-922B
25
STORAGE BINS
Hanger Bins – Material: Polypropylene
Code
TKI-8301
Size (mm) 50H x 105W x 110L Red Colour
TKI-8302
TKI-8303
75H x 105W x 140L Blue
TKI-8304
75H x 105W x 190L Yellow
TKI-8305
125H x 140W x 220L Blue
125H x 140W x 270L Red
• Each Bin supplied with index label • All of the above Bins are designed to assemble (interlock) onto the Louvred Hanger Board, see KH-306 below
Team Bins – Material: Polypropylene
TKI-810
Code
Size (mm) 75H x 100W x 160L Yellow Colour
TKI-820
TKI-815
124H x 150W x 240L Red
TKI-855
TKI-854
155H x 200W x 340L Blue
177H x 200W x 450L Blue
• Optional Extra: Back Link Clips Code: EBTK0892 • Each Bin supplied with index label and four supporting poles for interlocking Bins vertically • Interlockable slots on either side ensure Bins are kept locked side by side
177H x 300W x 450L Blue Back Link Clips per 100
Mobile Storage Bin Rack
Universal Team Bins – Material: • ABS Cabinet. • Polyethylene Drawers Interlockable from left to right or top to bottom
Code
Cabinet Size (mm) Drawers (included)
EBTK0892
Code
c/w 64 small bins and 30 large bins. Small bin: 75H x 105W x 165L Large bin: 125H x 150W x 240L
TKI-301
TKI-302
86H x 128W x 195D 86H x 128W x 195D 73H x 112W x 167D 35H x 116W x 167D (1pcs) (2pcs)
TKI-304
TKI-303
86H x 128W x 195D 86H x 128W x 195D 73H x 48W x 167D 35H x 53W x 167D (2pcs) (4pcs)
HL3201
Size: 940 x 500 x 1250mm
• Each Bin supplied with index label
Document Cabinets – Material: • 0.7mm cold Steel Plate Cabinet • Polyethylene Drawers
Code
A4G-345
Cabinet Size (mm) 880H x 812W x 346D Drawers 45H x 230W x 326D (A4) (included) (46pcs)
CDH-420
295H x 464W x 230D 47H x 101W x 222D (20pcs)
CKM-312
385H x 600W x 283D 71H x 158W x 255D (12pcs)
A4G-106
A4HG-10203
A4H-104
360H x 260W x 346D 360H x 260W x 346D 360H x 260W x 346D 45H x 230W x 326D (A4) 71H x 230W x 326D (A4) (2pcs) 71H x 230W x 326D(A4) (6pcs) 45H x 230W x 326D (A4) (3pcs) (4pcs)
B4HG-10203
B4H-104
360H x 300W x 414D(mm) 360H x 300W x 414D(mm) 71H x 270W x 393D (B4) (2pcs) 71H x 270W x 393D (B4) (4pcs) 45H x 270W x 393D (B4) (3pcs) Louvred Board – Material: • 0.7mm cold Steel Plate
Code
Cabinet Size (mm)
26
RM-530
880H x 900W x 420D Bins included 30 x TR-4116 (Bins) c/w 2 dividers per Bin Max dividers per Bin, 7
TR-4116
105H x 415W x 168D Spare Bins
TR-DIVIDER
Spare Dividers (3pcs)
Hanger Rack for Hanger Bins • Anti-Slip Device • Flexible Spacing • Colour Labels (included)
MET
Code
Size (mm)
KH-306
900W x 450H
1000V INSULATED TOOLS 1604032 1607054 1602200
Cable Cutter with Ratchet Description
• For copper and aluminium cables only • Special blades with high cutting capacity • With opening device
Cable Size Ømm mm2 32 52 22
Universal-knife with Interchangeable Blade
240 380 80
Code
Length mm
1604032 1607054 1602200
250 380 200
AV3910
200
AV3911
–
AV3920
200
AV3921
–
AV6720
180
AS1003
240 x 260 height
• With ordinary blade • made of shock-proof material Spare blade for AV3910
Cable-knife with Blade Protection (For Cable Stripping) • With solid blade and insulated blade-back • Special blade cuts insulation, not copper • made of shock-proof material Spare blade for AV3920
Scissors
• Surface treatment: Burnished Protected • Handles of shock-proof plastic
Set - Cable-stripping Tool (AMS) Kit Includes: 1 Cable-stripping-tool (AV6220) 1 Cable knife (AV3920) 1 Spare blade (AV3921)
Retaining Screwdrivers for Slotted Head Screws Code
Description
AC1451 AC1452 AC1453 Retaining Screwdrivers for Phillips Screws • Blade of tempered, high-alloyed steel (surface: browned)
Description
Code
• Blade of tempered, high-alloyed steel (surface: browned)
AC1750 AC1751 AC1752
Screwdrivers for Hexagon Screws Description
Code
• Blade of tempered, high-alloyed steel (surface: browned) • With power handle UNI 6750 DIN 7445
1306040 1306050 1306060 1306080 1306100 1306130
Single Ended Spanner
• Quality symbol VDE/GS only for sizes 10-24mm • Spanner inclination: 15° • Tempered, alloyed steel UNI 6733 DIN 7446
AC2006 AC2008 AC2010 AC2013
mm 3.0 4.0 5.0
mm
mm
100 125 150
No. 0 1 2
mm 4 5 6 8 10 13
6 8 10 13
0.5 0.7 0.8
mm
125 150 175
mm
mm
190 225 285
mm
225 260 285
mm
125 125 125 125 125 125
215 215 215 225 225 225
-
105 105 105 132
FIXED BLADE CABLE KNIVES Code
Description
31HS 32HS 33HS
• Fixed Straight Blade Wire Stripper
• Fixed Hook Blade - No damage on conductor cores • Fixed Hook Blade - Suitable for sector cables
MET
27
HYDRAULIC CRIMPING TOOLS
Code
Cable Size Dies incl. Output (T) Ram Stroke Features
CYO-510B
50-400mm² 50, 70, 95, 120, 150, 185, 240, 300, 400 13 38mm • Rugged heavy duty design • Insulated fibreglass handles • Auto oil-bypass protection system • 2-stage pumping action • Rotatable head 180º
Hydraulic Pumps
Works with CYO-0410H & SHP-210D
Code
CP-390
• Hand-operated hydraulic pump • Internal high pressure protection valve • Max output: 700kg/mm²/ 10 000psi • Output range (Psi): 350-10 000 • Oil capacity: 480cc • PT3/8" oil pipe connection
Works with CYO-0410H & SHP-210D
CFP-800-1
HP-210D
HP-240F
25-240mm² 16,25,35,50,70,95,120,150,185,240 5 15mm •Rotatable head 180º •Safety pressure
25-240mm² Built-in revolving die 12 22mm • Rugged heavy duty design • Integrated rotatable head bits ensure no misplaced parts • Audible warning of high/low pressure • Rotatable head 180º
• Foot-operated pump • Internal high pressure protection valve • Max output: 700kg/mm²/ 10 000psi • Output range (Psi): 350-10 000 • Oil capacity: 650cc • PT3/8" oil pipe connection
Cable Cutter
Works with CP-390 & CFP-800-1
CPC-100
• Can cut cable up to Ø 100mm depending on the type of material. Solid copper = Ø 42mm • Output: 7.5T • Length: 570mm • Max oil pressure: 700kgf/cm² (10 000 psi) • PT 3/8" oil pipe capacity • Spare Blade: CPC-100-BLADE
Crimping Heads
Works with CP-390 & CFP-800-1
Works with CP-390 & CFP-800-1
CYO-410H
• Cable Size: 35-300mm² • Dies Incl: 35,50, 70, 95, 120, 150,185, 240, 300 • Output (T): 12 • Ram Stroke: 30mm • For use in & outside DB • Titanium Alloy Construction
SHP-210D
• Cable Size: 25-240mm² • Built-in revolving die • Output (T): 12 • Ram Stroke: 22mm • For use in & outside the DB
CORDLESS POWER TOOLS Available while stocks last. See new range on page 429.
Crimping / Cutting / Punching Tool Code EZ-60UNV
Crimp Force
60KN
Crimp Size
16 - 300mm2
Punching Range
Ø22mm - Ø60.5mm
Battery Voltage
18V
Cutting Range
Ø40mm (Cu/Al Cable)
Stroke
42mm
Supplied With
• 2 x Batteries + 1 x Charger • Crimping Dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm² • Punching Dies: Ø22, 28, 34, 43, 49, 60.5mm
28
MET
• Spare Battery Code: EZ-BAT18V • Spare Blade Code: EZ-BLADE • Spare Charger Code: EZ-60-CHARGER
PROFESSIONAL POWER TOOLS Crimping Tool Code
Supplied With
16-300mm 60KN 300 17mm 18V / 3Ah
Crimp Size Crimp Force Crimps/Charge Stroke Battery
• Dies 16, 25, 35, 50, 70, 95,120, 150, 185, 240, 300mm² • 2 x Batteries + 1 x Charger (230VAC/18VDC) • 1 Set Spare Cylinder Seals • 1 Set Spare Safety Valve Seals • Spare Battery Code: BZ18/3AH
BZ-300
2
Supplied With
Crimping / Cutting / Punch Tool Code
Crimp Size Crimp Force Crimps/Charge Cuts/Charge Cutting Range Punch/Charge Punching Range Stroke Battery
Punch Tool Code
Code
Power Features
16-300mm 60KN 160 70 Ø40mm (Cu/AL + Armoured) 100 Ø22.5mm - Ø61.5mm 42mm 18V / 3Ah 2
BZ-12
61.5Ø / 35 x 65mm 120KN 180 25mm 18V / 3Ah
Punch Size Punch Force Punch/Charge Stroke Battery
Drill Press
BZ-600UNV
• Dies 16, 25, 35, 50, 70, 95,120, 150, 185, 240, 300mm² • Punch Round 22.5, 25.4, 32.5, 40.5, 50.5, 61.5mm • 2 x Batteries + 1 x Charger (230VAC/18VDC) • 1 Set Spare Cylinder Seals • 1 Set Spare Safety Valve Seals • 1 x Crimping Adaptor & 1 x Punch Adaptor • Draw studs 3/4”, 7/16” + Spacer • Spare Blade Code: BZ600-BLADE • Spare Battery Code: BZ18/3AH Supplied With • Punch/die 22.5, 25.4, 32.5, 40.5, 50.5, 61.5mm • Draw Studs 1 x 7/16 x 3/4” + 1 x 3/4 x 3/4” • 2 x Batteries + 1 x Charger (230VAC/18VDC) • 1 Set Spare Cylinder Seals • 1 Set Spare Safety Valve Seals • Spare Battery Code: BZ18/3AH
POWER TOOLS Heat Gun
ZJQ4116-A1
Heat Gun
PLD2230
PLD2232
2000W 3 Speed / Temperature Settings: 1: 50°C / 500 /min 2: 450°C / 250 /min 3: 600°C / 500 /min
500W Variable spindle Speed: 390 - 2600rpm Spindle travel: 50mm Overall height: 630mm Chuck: 13mm
2000W 3 Speed / Temperature Settings, with Adjustable Temperature for Setting 2 & 3: 1: 50°C / 250 /min 2: 50-600°C / 250 /min 3: 50-600°C / 500 /min Able to work continuously without overheating.
WALL CHASER Code
LT83322
This wall chasing machine
Supply: 230VAC/ 50Hz
will not damage the
Power: 1100W
wall material and can
No load RPM: 2000RPM cut straight or curved Cutting width: 16-35mm
grooves. Every cut will
Max depth: 20-35mm
leave a deep wide groove.
MET
case
Spare Blades Code* 16mm
LT83322-16
Code* 25mm
LT83322-25
Code* 35mm
LT83322-35
*For wall slot size
29
TOOLS
Hydraulic Foot Pump
Headstock for Punches
Cutting Headstock
Crimping Headstock
For Crimping and Punching
For fitting of Round or Square Punches
For cables up to 110mm2 Dia
For crimping of uninsulated lugs 10 to 400mm2. Crimping force 120KN
Dies to be ordered separately type BM184
BM1600
Code
BM288 For cable 85mm Ø max BM289 For cable 110mm Ø max
BM265
Hydraulic Hole Punch Code
Hex Dies for BM284
BM185
Size Size mm2 Code mm2 For punching of 10 BM184010 120 steel Round and Square 16 BM184016 150 25 BM184025 185 Complete with carrying case 35 BM184035 240 Max size: Round 72Ø 50 BM184050 300 Square 68 x 68 70 BM184070 400 Dies to be ordered separately 95 BM184095 Round Punches for Mild Steel (3mm max) Round Punches for Stainless Steel (316) BMT3050
C-Sleeve Dies for BM284 Size mm2
Code
BM184012 BM184015 BM184018 BM184024 BM184030 BM184040
Code
10 16-25 35 50-70 95 120-150
BM184210 BM184225 BM184235 BM184270 BM184295 BM184212
Square Punches for Mild Steel (3mm max)
BMTX305 BMX301/2
BM301/2
Code
Size mmØ
Shaft Required
Prehole
BMT1700 BMT1950 BMT2250 BMT2550 BMT3050 BMT3250 BMT4000 BMT4500 BMT5050 BMT6200
17 19.5 22.5 25.5 30.5 32.5 40 45 50.5 60
BM301 BM301 BM301 BM301 BM301 BM302 BM302 BM302 BM302 BM302
11.5 11.5 11.5 11.5 11.5 17 17 17 17 17
NB: Shaft to be ordered separately
Size mmØ
Code
Shaft Required
22.5 BMX301 30.5 BMX301 40 BMX302 50 BMX302 60 BMX303 NB: Shaft to be ordered separately
BMTX225 BMTX305 BMTX400 BMTX500 BMTX600
Prehole 11.5 11.5 17 17 22.5
Manual Punch (2mm Mild Steel max.) Punch to be ordered separately
BM301/B Hexbolt for punches BMT1700 – BMT3050 BM302/B Hexbolt for punches BMT3250 – BMT6200
Hand Hydraulic Press r ea ty 3 Yrran a W
BM284
Hand Crimping Tool
240mm2
For Uninsulated Terminals 10 to Including Dies for BM1824
BMQ BM311/2/3/4
Code BMQ30 BMQ46 BMQ68 BMQ92 BMQ138
Size mm
30 46 68 92
138
Shaft Required BM311 BM312 BM313 BM313 BM314
Pre -hole 19.5 19.5 28.5 28.5 28.5
NB: Shaft to be ordered separately Dies for BM582, BM1842, BM182P
For Uninsulated Terminals 10 to 150mm2
Dies Size mm2 ID 7/18 BM182010 10 & 120 BM182016 16 & 95 BM182025 25 & 70 Assortment kit with: Hand hydraulic press 50kN Dies-set for uninsulated terminals 10 to 240mm2 in carrying case.
Code Code
30
BM182035 35 & 50 BM182015 150 BM182018 185 BM182024 240
BM1824 Kit c/w dies in carry case BM182P Press only in carry case
7.5/16
Hex Dies
9/14 11/12 20 22 25
Including carrying case. Dies to be ordered separately
Code
BM582
MET
Code BM182010 BM182016 BM182025 BM182035 BM182015 BM182018 BM182024
Size mm2
10 & 120 16 & 95 25 & 70 35 & 50 150 185 240
C-Sleeve Dies
Code BM182210 BM182225 BM182235
Size mm2 10
16 - 25 35
PUNCHES, DIES & BOLTS
Round Screw Punch Diamant Series
Innovative splitting punch with three cutting tips. Suitable for: Steel Sheets (ST 37), Plastic and Aluminium. Operation: Manual and Hydraulic. Includes Punch, Die and Tension Bolt with Ball Bearing (Encapsulated).
Punched Waste Split into Three Parts
Max. Material Thickness
Code
Hole Size
Bolt Size
132502 132504 132506 132508 132510 132512 132514 132518 132520 132524 132526 132528 132530 132532 132534
16.2mm
9.5mm
20.4mm / PG13
9.5mm
2.0
25.4mm
9.5mm
2.0
32.5mm
19.0mm
3.0
40.5mm
19.0mm
3.0
50.5mm
19.0mm
3.0
63.5mm
19.0mm
3.0
15.2mm / PG9
9.5mm
2.0
18.6mm / PG11
9.5mm
2.0
22.5mm / PG16
9.5mm
2.0
28.3mm / PG21
9.5mm
2.0
37.0mm / PG29
19.0mm
3.0
47.0mm / PG36
19.0mm
3.0
54.0mm / PG42
19.0mm
3.0
60.0mm / PG48
19.0mm
3.0
2.0
Material Type Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel
Round Screw Punch Diamant Series
Innovative splitting punch with three cutting tips. Suitable for: Stainless Steel (VA Steel), Steel Sheets (ST 37) , Plastic and Aluminium. Operation: Manual and Hydraulic. We recommend use of hydraulic punch. Includes Splitting Punch, Die, without Tension Bolt.
Punched Waste Split into Three Parts
Mild Steel
Code Punch & Die 132700 132702 132704 132706 132708 132732
Hole Size 16.2mm 20.4mm / PG13 25.4mm 32.5mm 40.5mm 30.5mm
Tension Bolt Code 135014 135014 135014 135004 135008 135004
Max. Material Material Type Thickness
Bolt Size
2.5
Stainless Steel
11.1mm
Stainless Steel
11.1mm
Stainless Steel
11.1mm
Stainless Steel
19.0mm
Stainless Steel
19.0mm
Stainless Steel
19.0mm
2.5 2.5 3.5 3.5 3.5
Round Screw Punch Diamant Series - Punch and Die only
Code 133000 133004 Stainless Steel
Description
Material Type
16, 20, 25, 32, 40mm Round Punch and Die Set
Stainless Steel
16, 20, 25, 32, 40mm Round Punch and Die Set
Mild Steel
Round & Groove Puncher
For anti-rotation locking of pushbuttons and switches. Lateral scrap part ejector, Supplied in plastic case, Suitable for hydraulic operation.
Code 132801
Description
22.5mm Round Puncher with 3mm Stud
Material Type Stainless Steel
Square Screw Punch
Patented Die: with lateral scrap part ejector. Suitable for: Steel Sheets (ST 37), Plastic and Aluminium. Operation: Hydraulic. Includes Punch, Die, Hydraulic Bolt and Counter Nut.
Code
Description
132858 132864 132866
45.5 x 45.5mm Complete Square Punch 68.0 x 68.0mm Complete Square Punch 92.0 x 92.0mm Complete Square Punch
MET
Max. Material Thickness
3.0 3.0 3.0
Material Type Mild Steel Mild Steel Mild Steel
31
HYDRAULIC BATTERY PUNCH Battery Operated Punch
Practical hand-held hydraulic tool with high performance rechargeable 18V battery, for round, rectangular and square punching in control cabinets and plant construction. With pressure relief valve, high-performance drive motor, high tensile strength aluminium head. Ergonomically designed two-component handle, rechargeable battery packages can be inserted from either of two sides.
Code 134012
Description
Punching Force: 70KN Battery Charge Time: 45mm Supplied in robust plastic case: Battery operated hand-held hydraulic unit, 18V rechargeable battery, charger, two hydraulic bolts, set of spacer sleeves (3 pieces), pre-drill 11.0mm, operating instructions.
Accessories Battery insertion at the front to ensure stable position
Battery insertion at the back for spacesaving operation
Code
134014 135002 135006 135016
Description
Rechargeable Battery for 134012 Hydraulic Punch Spare Hydraulic Bolt 19.0/9.5mm Spare Hydraulic Bolt 19.0mm Spare Hydraulic Bolt 19.0/11.1mm
HYDRAULIC CRIMPING & CUTTING Battery Powered Hydraulic Press - 60KN Code
BM383
180° Adjustable Headstock Built-in Pressure Gauge Comes in Carry Case with Battery Charger Crimping Range: 10-185mm2 Crimping Force: 60KN Battery Voltage: 14.4V Weight: 3kg
Code Hex Dies 183010 183016 183025 183035 183050
Battery Powered Hydraulic Press - 120KN Code
BM384
360° Adjustable Headstock Built-in Pressure Gauge Battery Charge Level Indicator Comes in Carry Case with Battery Charger Crimping Range: 10-400mm2 Crimping Force: 120KN Battery Voltage: 14.4V Weight: 7kg Headstock Opening: 30mm
Code -Hex Dies BM184010 BM184016 BM184025 BM184035 BM184050 BM184070 BM184095 BM184012 BM184015 BM184018 BM184024 BM184030 BM184040
Battery Powered Hydraulic Cable Cutter - 60KN Description Code
180° Adjustable Headstock Built-in Pressure Gauge Comes in Carry Case with Battery Charger Cutting Force: 60KN Battery Voltage: 14.4V. Weight: 5.6kg
BM388
BM3802 BM3801
Accessories for BM Battery Powered Hydraulic Tools Description Code Spare 14.4V Battery NIMh BM3801 Spare Battery Charger for 14.4V Batteries BM3802 BM3803 230VAC - 14.4 VDC Power Converter for 14.4V BM Crimping & Cutting Tools
BM3803
32
MET
Size mm2
10 & 185 16 & 150 25 & 120 35 & 95 50 & 70
Size mm2
10 16 25 35 50 70 95 120 150 185 240 300 400
Cutting Capacity
CU/AL: Cable 40mm Max Rod 25mm Max Steel: Cable 15mm Max Rod 16mm Max
CABLE CUTTERS Cable Cutters for Copper Cable Code BM568
Description
For cutting copper cable up to 35mm²
BM5681
For cutting copper cable up to 60mm²
BM570 BM568
BM570
For cutting copper cable up to 120mm²
BM571
BM571
For cutting copper cable up to 240mm²
BM572
For cutting copper cable up to 400mm²
Cable Cutters for Aluminium & Copper Cables LK-22A
Code
Description
LK-22A
For cutting copper & aluminium cables up to 22mm²
LK-60A
LK-60A
For cutting copper & aluminium cables up to 60mm²
CC-100L
For cutting copper & aluminium cables up to 100mm²
HS-325A HS-520A
CC-100L
LK-250 LK-500
For cutting copper & aluminium cables up to 150mm² For cutting copper & aluminium cables up to 240mm² For cutting copper & aluminium cables up to 250mm² For cutting copper & aluminium cables up to 500mm²
HS-325A/520A LK-500/ LK-250
X-PRO 50mm2 Shears
X-PRO Evo 50mm2 Shears
Maxi Grip
Cable Shears
ted t ten Do a P ed ard R w A
Code
BM1325
• Innovative new spring loaded opening action • For the easy stripping and cutting of cables • Especially designed blade for cutting of Aluminium & Copper cables up to a size of 50mm² • Belt Clip Holder
BM1330
• Ergonomic Design for stronger grip & increased comfort • New design accommodates different hand sizes • New reinforced handles • Longer lever & micro serrated blades for easier cutting of cables up to 50mm2
BM1335
• Wire Shears • Robust ergonomic handle • For the easy cutting and stripping of Aluminium and Copper cables up to a size of 35mm² • Tempered stainless steel blade • With safety lock
BM1311
• Wire Shears • Bi-Component handle for greater cutting force • Non-slip serrated blades • Tempered stainless steel blade • Belt clip holder
BOLT CUTTER
Heavy Duty Bolt Cutter Description Code 610mm (24”) Bolt Cutter HT10-6213 762mm (30”) Bolt Cutter HT10-6214
• Alloy Steel • Tubular Handle • Jaws hardened to HRC55-61
MET
33
CRIMPING TOOLS Professional Tools Code BM Type BM534
For insulated lugs (red, blue, yellow)
LY-03C
BM537
For insulated boot-lace ferrules
LY-04WF
BM539
For insulated boot-lace ferrules (6-16mm2) For insulated boot-lace ferrules (10-35mm2)
LY-16WF LY-35WF
BM531
For non insulated auto lugs (0.5-6mm2)
LY-03B
BM535
For non insulated lugs
KH-16 (1.25-16mm2) KH-22 (5.5-25mm2)
–
Hex hand crimp for non insulated lugs
HX-16 (6-16mm2) HX-26B (6-25mm2) HS-05H (1.5-25mm2)
BM543
For coaxial connectors for cable RG58-59-62-6
HS-02H
BM538
For insulated boot-lace ferrules
HSC8-6-4
BM549
Crimping tool for RJ11, RJ12, RJ45
(0.5-4.0mm2)
(0.5 - 10mm2)
(0.5 - 10mm2)
Code
BM524 BM525 BM526 BM527
Economy Tools Code
Description
(0.5-6.0mm2)
(0.5 - 6mm2)
ZD-501006 Code
Description Uninsulated Terminals 0.5-10mm
2
Uninsulated Terminals 2.5-16mm
2
BM523
Description
Heavy Duty crimping Tool for use with uninsulated terminals 10-120mm2
Uninsulated Terminals 6-35mm2 Bootlace Terminals 25 - 35 - 50mm2
Hand Crimping Tools - For uninsulated lugs CT-80
CT-80
Crimping tool with movable & revolving dies 10-95mm2
HX-50B
Hex crimping tool with movable & revolving dies 6-50mm2
HX-150BX HX-245B MT-120
HX-50B/150BX & HX-245B
Hex crimping tool with movable & revolving dies 25 - 150mm2 Hex crimping tool with movable & revolving dies 70-240mm2 Heavy Duty Point Crimping Tool 16 - 95mm2 MT-120
Crimping Tool Kit - with exchangeable dies Code
BM5345
34
BM5345 Complete Kit in a carry case for the following applications: • Insulated Terminals 0.25-6mm2 • Boot Lace Terminals 0.5-4mm2 • Boot Lace Terminals 6-16mm2 • Barrel Open Terminals 0.5-6mm2 • Uninsulated Terminals 0.5-10mm2
ZD-922A
MET
ZD-922A
Complete Kit in a carry case for the following applications: • Insulated Terminals 0.25-6mm2 • Boot Lace Terminals 0.5-16mm2 (2 dies) • Hex crimping of uninsulated terminals up to 35mm2
Kits
CRIMPING TOOL KITS
Data Socket Insertion Tool
Code
For boot-lace insulated ferrules 300pcs (0.5-4.0mm2) c/w Tool type YS-03C0
YS-03C0-1A
151pcs Mixed Insulated Lugs c/w Tool type KH-502
Y-190
Insertion tool for data socket use on 66 & 110/88 type connectors
Code HT-914A
YS-03CO-1A
Y-190
HT-914A
KH-502
Multipurpose Tool
KH-502
Y-200
Y-202
120pcs Mixed Insulated Lugs
Y-202
300pcs Mixed Insulated Lugs
Y-200
45pcs Mixed Insulated Lugs c/w Terminal Crimp and Wire Stripper
SB201437
SB201437
BOOT LACE FEATURE KITS
Kit for Boot-Lace Ferrules
Kit for Insulated Plugs
Code
Kit Includes
BM00411 Tool: BM534
Blue 2.5mm2 Insulated: Red 1.5mm2 Insulated : 4mm Ring - 100pcs; 4mm fork - 100pcs; 4mm Ring - 100pcs; 5mm Ring - 100pcs; 10mm Pin - 100pcs; 4mm fork - 100pcs; Ferrules - 100pcs; 5mm Ring - 100pcs; 6.3mm female disc. - 100pcs; 10mm Pin - 100pcs; 6.3mm male disc. - 100pcs; Ferrules - 100pcs; 6.3mm insulated female disc - 50pcs 6.3mm female disc. - 100pcs; 6.3mm male disc. - 100pcs Yellow 4-6mm2 5mm Ring - 50pcs; Ferrules - 50pcs; 6mm Ring - 50pcs
Guillotine
Code
BM2691
BM00412
Kit Includes
Tool: BM541
Bootlace Ferrules Single: 0.75mm2 white 500pcs; 1mm2 yellow 500pcs; 1.5mm2 red 500pcs; 2.5mm2 blue 250pcs; 4mm2 grey 200pcs; 6mm2 black 100pcs; 10mm2 ivory 50pcs; 16mm2 green 50pcs
DIN RAIL CUTTER
Cutter & puncher for rails EN 50035, EN 50022, EN 50045. Designed for extremely rapid, precise and safe cutting & punching of standardised metal frame profiles.
Dies
BM269112
For rail DIN35(DR35) 7.5mm
MET
BM269113
For rail DIN35(NS35/15) 15mm
Bootlace Ferrules Double: 2 x 0.75mm2 white 200pcs; 2 x 1mm2 yellow 200pcs; 2 x 1.5mm2 red 200pcs; 2 x 2.5mm2 blue 100pcs; 2 x 4mm2 grey 100pcs; 2 x 6mm2 green 50pcs
Support Guide
BM26912
BM269122
Support Guide for BM2691
Support Guide for rail 7.5 & 15mm
35
HAND TOOLS
Screwdrivers
Slotted Electricians Screwdrivers
Code SB1112 SB1113 SB1114
Phillips Electricians Screwdrivers
Code SB1120 SB1121
Pozidrive Electricians Screwdrivers
Code SB1130 SB1131
mm
SB1195
SB1195
SB1197 / SB154115
75 100 100
0 1
60 80
mm
2.5 4.0 6.5
0 1
Code
mm
SB1122 SB1123
130 180
mm mm
SB1115 SB1116 SB1118
145 170 200
Code
mm
60 80
SB1132 SB1133
130 180
SB154115
SB256713
Silicone / Caulking gun Rubber grip to prevent slipping
Chalk line
mm mm
5.5 6.5 8.0
mm
125 150 175
225 260 285
mm mm
2 3
mm
100 150
210 272
mm mm
2 3
mm
100 150
210 272
7 Piece Kit mm mm
1 2
Code
mm
SB1197
145 200 260 180 210
75 100 150 80 100
Nutdriver Kit - 7 Pieces Code Sizes (mm)
SB257803
Tubular Hacksaws
2.5 3.0 4.0
Code
mm
mm mm
Screwdrivers 5 Piece Kit Code
mm
mm mm
2.5 4.0 5.5 6.5
mm
0 1 2
75 100 125 150 60 80 100
mm
145 170 225 260 130 180 210
Length
5, 6, 8, 10, 11, 12, 13
245mm
Cable Tie Tensioners
HS-600A
TG-100
Cable Tie Gun for tensioning and auto cutting for Ties 2.5-4.8mm wide
Combination Square 300mm
SB208101
Cable Tie Gun for tensioning and manual cutting for Ties 2.5-4.8mm wide
Plastic Tape Dispenser
Oval Tubular Hacksaw Frame with aluminium handle 250-300mm
SB208172
Square Tubular Hacksaw Frame with aluminium handle and soft gripMET 300mm (12”)
SB208311 (12Pc)
SB205562
Adjustable Square with spirit level
Stainless Steel Rulers
Spare Hacksaw Blades 300mm (12”)
ARK-243111-6
All Aluminium 6” Junior Hacksaw
36
ARK-167103-12
MET
12”/300mm
ARK-167103-20 20”/500mm
HL5041
For use with packaging tape
HAND TOOLS
Mini Pliers • Bi-Material TPR Handle (soft rubber) • Fully Polished Long Nose
Bent Nose
Flat Nose
Round Nose
Diagonal Cut
End Cut
Linesman
Needle Nose
Code
HT10-3061
HT10-3062
HT10-3063
HT10-3064
HT10-3065
HT10-3066
HT10-3067
HT10-3068
Size
128mm
128mm
115mm
101mm
101mm
101mm
115mm
153mm
Combination Pliers
Long Nose Pliers
Side Cutters
Code (150mm) 6”
HT10-2021
HT10-2024
HT10-2026
HT10-2022
–
HT10-2027
Code (200mm) 8”
HT10-2023
HT10-2025
–
Shifting Spanners
Water Pump (Gas) Pliers
Vice Grip (Curved Jaw)
–
–
HT10-4026
• Chrome Vanadium Steel • Micro Finish • Bi-material TPR Handle
Code (180mm) 7”
Code (125mm) 5”
Code (180mm) 7” Code (200mm) 8”
–
–
HT10-4027
HT12-1062
HT12-1063
HT10-5531
–
HT10-5532
HT10-4028
Code (300mm) 12”
HT12-1064
HT10-5534
–
Code (254mm) 10”
Utility Knives & Sets 10Pc Knife Blades
SB215152
Utility Knife with 3 blades stored in body
• Multi-Stop Button & Retractable Blade • Zinc Alloy
SB215009
3Pc Utility Knife Set
Utility Knife with auto lock and rubber grip
Spare Blades for utility knife 10pcs/ pack
9mm (W) blade
9mm (W) x 80mm (L)
SB215120
SB215153
SB215162
3Pc File Set 200mm (8'') flat, round, half round
SB208863
Hammers & Mallets Claw Hammer
Fully polished with plastic coating handle 566gram SB203016 Two Way Mallet With fibreglass handle
35mm Ø SB203591-35 45mm Ø SB203591-45
Ball Hammer
Fully polished with plastic handle 440gram SB203162-16 672gram SB203162-24
Drop forged Stone Hammer
1kg ARK-146301-1 2kg ARK-146301-2
MET
Rubber Mallet
With fibreglass handle 440gram SB203541-16 672gram SB203541-24
Stone Chisel with Protector
3/4” x 5/8 x 8” Stone Chisel
ARK-255213
37
HAND TOOLS
Spanners • Material: Chrome Vanadium Steel Combination Spanner
Size mm 6 7 8 9 10 11 12 13 14 15 16 17 18
Double Open Ended Spanner
Size mm
Code HT12-4206 HT12-4207 HT12-4208 HT12-4209 HT12-4210 HT12-4211 HT12-4212 HT12-4213 HT12-4214 HT12-4215 HT12-4216 HT12-4217 HT12-4218
Size mm
Code HT12-4219 HT12-4220 HT12-4221 HT12-4222 HT12-4223 HT12-4224 HT12-4225 HT12-4226 HT12-4227 HT12-4228 HT12-4229 HT12-4230 HT12-4232
19 20 21 22 23 24 25 26 27 28 29 30 32
Code
6–7 8–9 10 – 11 12 – 13 14 – 15 16 – 17 18 – 19
Code
Size mm
Code
HT12-6206 20 – 22 HT12-6208 21 – 23 HT12-6210 22 – 24 HT12-6212 25 – 28 HT12-6214 27 – 29 HT12-6216 30 – 32 HT12-6218 Auto Wrench 9"
HT12-6220 HT12-6221 HT12-6222 HT12-6225 HT12-6227 HT12-6230
SB137803-9 SB137803-9
Spanner & Allen (Hex) Key Sets 9Pc Combination Spanner Set 7, 8, 10, 11, 12, 13, 16, 17, 19mm
6Pc Double Open Ended Spanner Set 6+7, 8+9, 10+11, 12+13, 14+15, 16+17mm
30Pc Allen (Hex) Key Set 0.028-3/8'', 0.7-10mm Flat End
SB202102
SB202106
SB202403
Ratchet Combination Wrench Code
Size mm
SB133211-8 SB133211-10 SB133211-13 SB133211-15 SB133211-17 SB133211-19
8 10 13 15 17 19
9Pc Ratchet Wrench Set Code SB133249 72 Tooth ratchet needs only 5˚ of movement to turn a fastener 8, 10, 11, 12, 13, 14, 16, 17, 19mm
72 Tooth ratchet needs only 5˚ of movement to turn a fastener
Metric Socket Wrench Kit
22MRA-CV-S
Kit Includes: • 16pcs 1/2" Dr. Sockets: 10-19, 21-24, 27, 30, 32mm • 2pcs 1/2" Dr Extention BAR "3" & 5" • 1pc 1/2"(M)x3/8" (F) Adaptor • 1pc 1/2" Dr. Universal joint • 1pc 1/2" Dr. F Rachet handel • 1pc blow case
38
Screwdriver Kits
Screwdriver Kits
CT-2016
SB156237
Screw driver set
16 Piece precision screwdriver set
MET
9Pc Allen (Hex) Key Set 1.5-10mm Chrome Plated
SB202407 9Pc Ball Point Hex Key Set SB233157
1.5 - 10mm
31 Piece Screwdriver Bit Set
SB157243
Phillips, Flat, Torx and Hex
CABLE & WIRE STRIPPING TOOLS
Code
STRIP-2
STRIP-3
FLAT
Code
STRIP-5
STRIP-400
This tool allows circular and horizontal stripping and needs no adjustment of cutting depth. Range: Flex Cables: 4 - 13mm Ø. Solid Conductors: 0.5 - 6mm2. Multi-level of coaxial cables: 4 to 8 mm Ø. Built in side-cutter.
As per STRIP-2 with built-in side cutter
2-level stripping of all coaxial cables of 4.8 - 7.5mm outer Ø Performance Range: Coaxial 4.8 - 7.5mm Ø Cabtyre 4 x 0.75mm2 Flexible cables 1.5mm2 - 16mm2
• Automatic wire stripper for all common stranded and solid conductors of 0.2 - 6.0 mm2 • Adjustable length stop of 5 - 12mm (removable if required) • Easily accessible built-in side cutter for max 2mm Ø
ROUND
STRIP-7-FLAT
STRIP-7
Flat Cables: Cable and wire stripping of two or three core flat cables with PVC insulation from 0.75mm2 to 4.0mm. Round Cables: Cable and wire stripping of flexible cables in a range of 0.5mm2 to 16.0mm2. Solid conductors from 0.5mm2 to 10mm2. Spare Blade: STRIP7-BLADE (Round)
STRIP-300 (Duo - strip/crimp)
Three tools in one: Wire Stripper for inner insulations from 0.5 - 6mm2; Crimping of bootlace terminals with two crimping ranges: 0.75mm2 - 1.5mm2 and 2.5mm2 - 6.0mm2 as well as built-in side cutter for max. 6.0mm2
Spare Blade STRIP4-BLADE
Code
STRIP-SOLAR MINI
• Stripping depth stop • Compact wire stripper designed for the solar industry • Suits 1.5-Ø6mm • Side blade cutter
STRIP-7-SOLAR
An automatic wire stripper for all common round cables used in solar engineering. Precise adjustment allows easy removal of multiple insulation layers of solar cables from 1,5-6mm².
• Cable stripper for accurate fast and safe stripping of common round cables 4 - 28mmø. • Variable adjustment of cutting depth with adjusting wheel with no damage to the inner conductors • Automatic adjustment for circular or longitudinal cuts through turnable blade • Additional function: stripping of conductors for all common flexible and solid conductors 0,5mm2 - 6.0mm2
Code
39
STRIP-S428-M
STRIP4-28H
Both circular and longitudinal cuts are possible due to a self-turning stripping blade. Accurate, fast and safe stripping of all common round cables of 4 - 28mmØ.
STRIP-428V
Same as STRIP4-28H, plus: Cable connections, sockets, fuses, circuitry, connecting boxes, lamps and fairy lights etc. can be safely tested for AC voltage by an integral electric potential field sensor. No current flow is required.
STRIP-428
Same as STRIP4-28H, plus: This is the first cable stripper of its kind which has an additional hook blade that can be retracted into the tool & be fixed in both positions.
Second bit inside Round Cable Stripper the handle For all round cables of 8 - 13mm 2 2 ) (e.g. 3 x 1.5mm up to 5 x 2.5mm
• 12 Piece retail counter display stand c/w 12 pieces of STRIP-S428-M
STRIP-S428/12-M
MET
Stripper For all common stranded and solid conductors of 2 2 0.5mm to 6.0mm Coax Stripper Two- or three-level stripping of all common coaxial cables fo 4.8 to 7.5 mm outer Ø. Built in side cutter For PVC-insulated round 2 cables of max 9mm
Voltage tester 110 - 250V
Two turnable bits 1.PZ1 3.5 x 0.6mm 2.PZ2 4.0 x 0.8mm
STRIP-500
39
CABLE & WIRE STRIPPING TOOLS
Professional Cable Stripping Starter Kit
Code
PRO-STARTER
All standard cable types can easily be stripped and dismantled using the tools in the kit STRIP-428: The cable stripper series S 4 - 28 allows precise, quick and safe stripping of all standard round cables with a diameter between 4 and 28millimeters. Comes with retractable hook blade. STRIP-5: Automatic Wire Stripper. Precise work with adjustable length stop (5 - 12mm). Side cutter up to 2mm diameter. STRIP-13: For all standard round cables diameter 8 - 13mm. Flush stripping, even in hard to reach places. STRIP-2: Two-level stripping of all common coaxial cables.
SB201422
SB201426
SB201009
Wire Stripper for cables 0.5-4mm
Wire Stripper for cables 6-16mm 0.75-6mm
For wire 0.5-6.0mm
2
LY-700D
LY-700A
For wire 0.5-2.0mm
2
2
For wire 0.5-6.0mm
2
LY-700B
2
2
For wire 1.0-3.2mm
2
HAND TOOLS
Suction Lifters
BM1770
BM1760
Code
Description
BM1760 BM1770 BM1761
1 Cup suction disc 2 Cup suction discs Spare suction disc
Cup Size
120mm Ø 120mm Ø 120mm Ø
Carrying Capacity 30Kg 60kg ─
GAS POWERED HEAT TOOLS All models use Butane gas
Code
Weight Gas Capacity Operating Time Temperature Features Size
Accessories
ES-720TH
170g 19ml 90min Up to 1300˚C Portable heavy-duty torch Meets U.S. child resistant standard 180 x 52 x 111mm
ES-720SI
170g with cap 15ml 50min ± 200 - 450˚C Cordless butane powered soldering iron/heat tool
180 x 52 x 157mm
237 x 38 x 25mm (with cap)
Description
ES-720KB
Kit includes: • ES-720 multi function soldering iron • 2.4mm Conical tip • 2.4mm Chisel tip • Hot knife tip • Deflector tip • Sponge • Soldering wire • Wrench
ES-650KB
Kit includes: • ES-650 cordless butane powered soldering iron • 2.4mm Chisel tip • 3.0mm Diagonal tip • Hot knife tip • Heat blower tip • Deflector tip • Sponge • Soldering wire
Code
Description
Chisel 3.2mm
L-310
Hot knife
L-1105
Chisel 10.5mm
L-311
Hot knife
L-230
Diagonal 3.0mm
L-510
Heat blower
A-BR
Burning room
L-610
Heat deflector
Code L-016
Conical 1.6mm
L-132
L-024
Conical 2.4mm
L-124
Chisel 2.4mm
Accessories included with ES-720KB
40
ES-650SI
170g 19ml 90min Up to 480˚C Portable multi-function soldering iron/heat tool
Code
MET
Description
SOLDERING IRONS Soldering Irons Code Z88-2026
Z88-2026/8
ZD-715L
Z79-1146
Z79-201B
Description
Z79-1156
40W mains Soldering Iron
Z88-2028
60W mains Soldering Iron
ZD-715L-100W ZD-715L-200W
100W mains Soldering Iron
Z89-2934
48W station type
Z89-2926
48W station type
200W mains Soldering Iron
Spare Heater Element
Spare Tips
–
Z79-2320
–
Z79-2120
–
Z79-8504
–
Z79-8506
Z79-201B
Z79-1146 Z79-1156
Soldering Iron 160°C-480°C digital
Z79-201B
Z79-1146 Z79-1156
Soldering Iron 150°C-420°C
Z78-201B
Spare Heater Element for Iron
–
–
Z89-2934 & Z89-2926 Z89-2934
Z88-201B
Z89-2926
Spare Iron for Z89-2934 & Z89-2926 Solder Spools SN60% PB40%
SH-827
T-1
Code
SH-827 Solder Sucker
SH-814B
SH-60
POT-100 140W
50W Soldering Iron stand 50W Electric Solder Sucker
SH-60H
T-1
140W Solder Pot
Spare element
Spare Tip
SSA08500 Ø0.7mm SSA10500 Ø0.90mm SSA12500 Ø1.25mm SSA20000 Ø2.0mm • 500g rolls
OTHER TOOLS
ZD-7GLUE
Code
TAURUS-558 Solder pot lead free Adjustable Temp: 200-600˚C Power: 250W Pot dimensions: 55 x 55 x 45mm Capacity 1,2kg
TAURUS-107
ZD-509
Solder pot lead free Adjustable Temp: 200-600˚C Power: 500W Pot dimensions: 100 x 70 x 45mm Capacity: 2,3kg
Hot Airgun Low/Off/High 200°C – Off – 500°C 1500 Watts
ZD-7
40Watt Glue Gun
ZD-7GLUE
6Pcs Ø 11 x 100mm
ZD-7GLUE-300
6Pcs Ø 11 x 300mm
12VDC WRENCH & JACK
Auto kit for every car owner 12VDC impact wrench and jack Code
HF-12
Impact Wrench
Electric Jack
Voltage: 12VDC Working Current: ≤8A Max Torque: 300 NM Output Shaft: ½"m (13mm)
Voltage: 12VDC Max Load: 950kg Working Current:≤10A Lifting Height: 22cm (12-34cm)
MET
41
HAND RIVETERS
HR705
HR702
• High grade aluminium die cast housing with drop-forged carbon steel upper handle. • Steel and jaw case are made of chromed, hardened steel plate.
HR710
• Carbon steel forged housing and handle with powder coated surface. • Jaw and jaw case are made of chromed, heat treated steel. • Designed for industrial use.
Code
Length (mm)
Rivet Setting Capacity
HR705 HR702 HR710 HR720
265
Up to 4.8mm (3/16”) for all materials
300 Closed/810 Open
Up to 6.4mm (1/4”) for all materials
255 430
HR720
• Lever design reduces physical strength for all rivet sizes. • The three-jaw design can provide better performance with only a change of nose nozzle.
Up to 4.0mm (5/32”) for all materials and 4.8mm (3/16”) for aluminium Up to 4.8mm (3/16”) for all materials
BLIND RIVETS
Aluminium Rivets with Steel Mandrels
Domed Head
Code
Length
Grip Range G
Diameter
Hole Size (mm)
Head Dia
Head Thickness T
Standard Strength N. (min.)
L D H Shear Tensile 8 3-5 AS3.2-8-* 3.2mm 3.3-3.4mm 5.8-6.5 1.2 535 650 10 5-7 AS3.2-10-* 12 7-9 AS3.2-12-* 6 1.5-2.5 AS4-6-* 8 2.5-4.5 AS4-8-* 4.0mm 4.1-4.2mm 7.0-8.0 1.5 850 1020 10 4.5-6.5 AS4-10-* 12 6.5-8.5 AS4-12-* 14 8.5-10.5 AS4-14-† 18 12.5-14.5 AS4-18-† 10 4-6 AS4.8-10-† 4.8mm 4.9-5.0mm 8.5-9.5 1.6 1160 1420 12 6-8 AS4.8-12-† 14 8-10 AS4.8-14-† 18 12-14 AS4.8-18-† Add quantity to code:* 1000 (box packed),100 (packed in polybag for retail). † 500 (box packed), 100 (packed in polybag for retail).
Eye Bolts
Code
SB209333/M8
Size
10mm(L)
42
Thimble
Clamp
Tensioner
SB209331/6
SB209332/6.5
SB209336/8
6mm
6.5mm
8mm
L
For rope, see page 289
ROPE ACCESSORIES
SB209333/M10 SB209333/M12 13mm(L)
16mm(L)
MET
PROFESSIONAL POWER TOOLS
Code
Description Power No load Speed
Code
Description Power No load Speed
CT14013
CT13327
CT11001
Planer 710W 14500rpm Cutting Width: 82mm Cutting depth: up to 2mm Depth fully adjustable Lock off button c/w Fence guide
Router 2100W 8000-23000rpm Collet ø: 12mm Max. plunge depth: 60mm Electronic variable speed Soft start Lock off button
Cutting depth and angle adjustable
Cutting depth and angle adjustable
Circular saw 1200W 5000rpm Blade size: 165mm Max Cutting depth @ 90°: 55mm Max Cutting depth @ 45°: 36mm
Circular Saw 1500W 4800rpm Blade size: 190mm Max Cutting depth @ 90°: 65mm Max Cutting depth @ 45°: 44mm
CT15076
CT15077
CT15072
Flip-Over Saw 1800W 4200rpm Blade size: 255mm Mitre Saw and Table Saw in-one
CT13311
Belt sander 810W 380rpm Belt size: 533x76mm Soft Grip handle Flush Body design allows sanding of vertical surfaces and adjoining surfaces.
Adjustable angle: 45˚ left/right
CT15007
Cut-Off Saw 2200W 3750rpm Blade size: 355mm Cutting width: 145mm Cutting depth: 108mm Spindle lock for convenient changing of discs
WALL CHASER Code
Code
Description Power No load Speed
ZJQ4116-A1
Drill Press 500W 1440rpm Variable spindle Speed: 390 - 2600rpm Spindle travel: 50mm Overall height: 630mm Chuck: 13mm
LT83322
Supply: 230VAC/ 50Hz Power: 1100W No load RPM: 2000RPM Cutting width: 16-35mm Max depth: 20-35mm
This wall chasing machine will not damage the wall material and can cut straight or curved grooves. Every cut will leave a deep wide groove.
Spare Blades Code* 16mm
LT83322-16
Code* 25mm
LT83322-25
Code* 35mm
LT83322-35
*For wall slot size
case
MET
43
PROFESSIONAL POWER TOOLS
Code
Description Power No load speed Chuck Size Variable Speed Weight
Code
Description Power No Load Speed Impact Rate Drilling Capacity Weight
CT10070
CT10066
Drill for steel/wood 400W 0-3000rpm 10mm Yes 1.3kg
CT18029
Rotary hammer 850W 0-1100rpm 0-5100ipm 13mm Steel 26mm Concrete 32mm Wood 3,2kg
CT18004
CT10010
CT10068
Low speed drill, High torque 1050W 550rpm 13mm No 3.3kg
Impact drill, 2 Speed 1050W 0-1200/0-2800rpm 13mm Yes 2.56kg
Impact drill 780W 0-2800rpm 13mm Yes 2kg
CT18021
CT19004
CT19007
Rotary hammer 1050W 550rpm 3000ipm 38mm Concrete 22mm Granite
Demolition breaker 1500W – 900-1800ipm IMP force = 25J
Heat gun 1600W Temp: I:350˚C, II: 500°C Air Flow: I: 300ℓ/min, II: 500ℓ/min
Heat gun 2000W I:50˚C, II& III: 50-600°C I&II: 350ℓ/min, III: 500ℓ/min
6,9kg
10,5kg
0,5kg
0,7kg
Rotating Rear Handle
Code
Description Power No Load Speed Spindle Size Disc Size Net Weight
CT13003
Angle grinder 600W 11000rpm M14 115mm 2.1kg
Code
CT13332
Description Bench grinder Power 250W No Load Speed 2950rpm Disc Size: 125 x 25 x 32mm Net Weight
44
8.4kg
CT13305
CT13029
Angle grinder 2400W 6000rpm M14 230mm 5.4kg
Angle grinder 1200W 8500rpm M14 150mm 3kg
CT15080
Jig saws 500W 700-3000spm Cutting Capacity: 55mm Orbital Action: 4 position 2kg
MET
CT15078
Jig Saws 710W 700-3000spm Cutting Capacity: 100mm Orbital Action: 4 position 3.1kg
CT10019 + CT13003
Grinder Drill 600W 600W 11000rpm 0-2800rpm Spindle: M14 Chuck: 13mm Kit Includes: 9pcs Drill Bits 1pc. Grinding Wheel
CT17002
Blower - Dual function 550W 14000rpm Airflow: 3.5m³/min 1.72kg
SAND PAPER & SANDING BELTS
Floor Paper Rolls Code FP-P60D/1 FP-P80D/1 FP-P100D/1 Sanding Belts SB-75x532-P40/2 SB-75x532-P60/2 SB-75x532-P80/2 Water Paper Sheets WP-P80C/4 WP-P120C/4 WP-P222C/4 Cabinet Paper CP-P60D/4 CP-P80D/4 CP-P120D/4
Description
Grit
Pcs/Pack
Packs/Box
Sanding Belts - 75 x 532mm Sanding Belts - 75 x 532mm Sanding Belts - 75 x 532mm
P40 P60 P80
2 2 2
12 12 12
Coarse Water Paper Sheets - 230 x 280mm Medium Water Paper Sheets - 230 x 280mm Fine Water Paper Sheets - 230 x 280mm
P80C P120C P222C
4 4 4
25 25 25
Coarse Cabinet Paper Sheets - 230 x 280mm Medium Water Cabinet Sheets - 230 x 280mm Fine Water Cabinet Sheets - 230 x 280mm
P60D P80D P120D
4 4 4
25 25 25
1 1 1
P60D P80D P100D
Floor Paper Strips Floor Paper Strips Floor Paper Strips
25 25 25
POWER TOOL ACCESSORIES - DRILL CHUCK Drill Chuck - Keyless Type Code
Description
CTDCP0023
Chuck with double sleeve
Code
Power No Load Speed
Spares
3/8-24UNF
43
63-76
Drills
SND112 Volts Speed Spare Battery
2-13mm
Female Thread Diameter mm Min-Max Length mm
CORDLESS POWER TOOLS
Screwdrivers
Code
Clamping width mm
SND113 SND112
3.6V 250rpm SND3.6V
Reciprocating Saw
WLP827-01
SND113 6V 180rpm SND6V
18V Ni-cd Battery 2800rpm Maximum Cutting Depth: 101mm Stroke length: 22mm Charge life: 3-5 hours Wood blade: WL-RS01W/5 Metal blade: WL-RS02M/5 Battery: WL-BA01 Charger: WL-CH01
SND114
SND202
SND203
SND114
SND202
SND203
3.6V 150rpm SND3.6V
Jig Saw
WLP821-01
18V Ni-cd Battery 1700rpm Wood: 50mm, Mild Steel: 3mm Bevel angle range: 0-45˚ Charge life: 3-5 hours Wood blade: WL-JS01W/5 Metal blade: WL-JS02M/5 Battery: WL-BA02 Charger: WL-CH02
MET
18V 0-550rpm SND18V
Delta Sander
18V 0-550rpm SND-203BAT
WLP825-01
18V Ni-cd Battery 6000rpm Sanding Pad: 90 x 90 x 90mm Charge life: 3-5hours Spare Delta Sanding paper: WL-DS01/10 Battery: WL-BA02 Charger: WL-CH02
45
DRILLS & TAPS
Size Ø
Yellow Steel Drills Length Code (mm) HSS-1 HSS-1.5 HSS-2.0 HSS-2.5 HSS-3.0 HSS-3.2 HSS-3.5 HSS-4.0 HSS-4.2 HSS-4.5 HSS-5.0 HSS-5.5 HSS-6.0 HSS-6.5 HSS-6.8
34 40 49 57 61 65 70 75 75 80 86 93 93 101 109
7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2 11.0 12.0 13.0 14.0
HSS-7.0 HSS-7.5 HSS-8.0 HSS-8.5 HSS-9.0 HSS-9.5 HSS-10.0 HSS-10.2 HSS-11.0 HSS-12.0 HSS-13.0 HSS-14.0
109 109 117 117 125 125 133 133 142 151 151 160
Pack of 5
Each
Req 1st,2nd&3rd Masonary Drills (ZN-Plated) Drill Cut Taps Length Size Ø Code Size (Set) (mm) Set of 3
TAP-3/1 2.5
TAP-3/3
160
TAP-4/1 3.2
TAP-4/3
BP-C5-160 160 BP-C5.5-160 160 BP-C6-160 160
TAP-5/1 4.2
TAP-5/3
TAP-6/1 5.0
TAP-6/3
60
MAS-4/5
75
BP-C4-160
MAS-5/5
85
MAS-6
100
MAS-7
120
MAS-8
120
BP-C8-160
160
TAP-8/1
MAS-10
120
BP-C10-210
210
TAP-10/1 8.5
MAS-12
150
BP-C12-210
210
MAS-14
150
BP-C14-210
210
Twist Drill Sets
13 Pcs
6.8
TAP-8/3
TAP-10/3
SETS
Each
BP-C16-340 340
BP-C18-340 340 BP-C20-340 340 BP-C22-340 340 BP-C24-340 340 BP-C25-570 570 BP-C28-570 570 BP-C30-570 570 BP-C32-570 570
Tap & Die Set
16 Pcs
25 Pcs
19 Pcs
16.0 16.5 17.0 17.5 18.0 18.5 20.0 20.5 22.0 22.5 24.0 24.5 25.0 25.5 28.0 28.5 30.0 30.5 32.0 32.5 35.0 35.5 37.0 37.5 38.0 38.5 40.0 40.0
Code
TX-H1001
TX-H1302-1
TX-H1902-1
TX-H2502
TX-0802
Size:
1 to 10mm (1mm Increments)
1.5 to 6.5 (0.5 Increments) + 3.2 & 4.8mm
1.0 to 10.0mm (0.5mm Increments)
1.0 to 13.0mm (0.5mm Increments)
Tap & Die Size: M3, M4, M5, M6, M7, M8, M10, M12 1 x Tap Wrench / 1 x Die Handle
Jigsaw Blades
Masonary Drill Set
Tap Wrench M1-M8
5 Pcs
Code
Description
T118A For Metal 1-3mm
46
1st Cut Taps
Each
MAS-3/5
Each
Pack of 5
10 Pcs
SDS Max
Masonary Drills (ZN-Plated) Length Code Length Code (mm) (mm)
Pack of 10
Pack size 1.0 1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5 5.0 5.5 6.0 6.5 6.8
SDS Plus
High speed Drills
High speed Drills (DIN338)
M3-M12
Code
Length
For Size
D312-001
125mm
M1-M8
D312-003
200mm
M3-M12
MET
Impact Chisel
Description Code MI-F25-280 280(L) x 25(B)mm Chisel 4 Pcs Drill Sharpener Description Code Description Code TX-M402-1 4, 5, 6, 8mm Ø SND401 Drill ZN-Plated SND-STONE Spare Stone For Drills 3.6 -10mm Ø
HOLE SAWS
Arbors
Bi-Metal Hole Saws
Fixed Hole Saws
For use with HS Hole Saws
• High Speed Bi-Metal Edge welded to alloy steel for heavy duty cutting
Size Ø (Inches)
Size Ø (mm)
5/8”
16 20 22.5 25 29 30 32 35 38 40 44 48 51 54 57 60 64 73 76
25/32” 7/8”
1” 11/8” 11/16” 11/4” 13/8” 11/2” 19/16” 13/4” 17/8” 2” 21/8” 11/4” 23/8” 21/2” 27/8” 3”
HSD-01 HSD-02
Accessories Code HSD-01/10 HSD-02
Code − TX-20 TX-22.5 TX-25 − TX-30 − − − − − − − − − − − − −
Code HS-16 HS-20 HS-22.5 HS-25 HS-29 HS-30 HS-32 HS-35 HS-38 HS-40 HS-44 HS-48 HS-51 HS-54 HS-57 HS-60 HS-64 HS-73 HS-76 Description
10pcs Spare Drill Bit for HAS-02 & HAS-04 Adaptor for different Arbor Thread Size
• Shank Size: 3/8” Hex • Thread Size: 1/2” • Fits to 16 - 30mm Hole Saw
HAS-04 • Shank Size: 7/16” Hex • Thread Size: 5/8” • Fits to 32 - 76mm Hole Saw
Ø Size (mm) 6.35 x 73 1/2” - 5/8”
16 Piece Hole Saw Kit Code HSD-16
9 Piece Hole Saw Kit Code HSD-04 Includes
HAS-02
Includes
6 x Hole Saws: 20mm (25/32”), 25mm (1”), 32mm (1¼”), 40mm (19/16”), 51mm (2”), 64mm (21/2”) 2 x Arbors to fit Hole Saw: 1 /4” Hex to fit 16 - 30mm 7 /16” Hex to fit 32 - 210mm
2 x Arbors 3 /8” & 1/4 Hex with one 6mm pilot drill & 2.5mm allen key
1 x Adaptor 1/2” - 5/8”
1 x Drive plate
Drill Bit Kit - 101 Piece Kit Code
Includes
LB-013
19pcs - Hss Drills 3pcs - Hss drills with Hex Shank 4pcs - Hole Saw 5pcs - Flat Wood Drills 6pcs - Wood Drills
1pc - Counter Sinking Bit 3pcs - Screw Finder 22pcs - Miscellaneous Driver Bits 6pcs - Masonry Drills 4pcs - Drill Stopper
3M COMFORT GRIP GLOVES Comfort Grip Gloves Code Includes WX300921193 WX300921201
P3
12 x Hole Saws: 19mm (3/4”), 22mm (7/8”), 29mm (11/8”), 32mm (11/4”), 38mm (11/2”), 44mm (13/4”), 51mm (2”), 64mm (21/2”), 76mm (3”), 89mm (31/2”), 102mm (4”), 127mm (5”)
PROTECTION GOGGLES Code
Large Xtra-Large
10pcs - Nut Drivers 15pcs - 50mm Driver Bits 1pc - Magnetic Bit Holder
SB216040
Characteristics • Exceptional comfort and breathability: Thin foam coating provides high breathability for maximum comfort. • Fine gauge knit nylon liner provides flexibilty and padding • High Durability: Unique nitrile formula offers resistance to abrasion. Machine washable
MET
47
POWER TOOL ACCESSORIES - ABRASIVES Superflex Standard Cutting Wheel - Metal - Specification: AS30S B27 F2 Code
GTCW0001 GTCW0002 GTCW0003 GTCW0004 GTCW0005
DIA.
115 125 150 180 230
Thickness
Hole Size
3.0 3.0 3.0 3.0 3.0
22.2 22.2 22.2 22.2 22.2
Thickness
Hole Size
Shape 41 Flat 41 Flat 41 Flat 41 Flat 41 Flat
Max Speed
M/Sec
80 80 80 80 80
Superflex Quality Cutting Wheel - Metal (Light Duty Machines 2kw or Less) Specification: AS30R BF2E
Code
GTCW0006
DIA.
350
3.0
Superflex Standard Cutting Wheel - Stone
Specification: CS302 B40 F2 (Mainly Used For Wall Chasing)
Code
GTCW0009 GTCW0011 GTCW0013
DIA.
115 125 230
Thickness
Hole Size
M/Sec
Shape
M/Sec
41 Flat 41 Flat 41 Flat
Code
DIA.
80
22.2 22.2 22.2
Thickness
Hole Size
Shape
M/Sec
Shape
M/Sec
GTCW0014 GTCW0017 GTCW0019
115 125 230
1.0 1.0 1.9
22.2 22.2 22.2
Code
DIA.
Thickness
Hole Size
80 80 80
115 230
1.0 1.9
22.2 22.2
GTCW0026 GTCW0032
115 230
6.4 6.0
22.2 22.2
T41 Flat T41 Flat
RPM
13280 12280 6600
Max Speed
T41 Flat 80 T41 Flat 80 T41 Flat 80 Superflex Slimline Cutting Wheel - Multi-Purpose - Specification: C60T BF
GTCW0021 GTCW0022
RPM
4100
Max Speed
3.0 3.0 3.0
Superflex Slimline Cutting Wheel - Metal & Stainless Steel (2 in 1) Specification: A46T BF
Max Speed
Shape 41 Flat
25.4
RPM
13280 12280 10190 8600 6600
RPM
13280 12280 6600
Max Speed 80 80
RPM
13280 6600
Superflex Standard Angle Grinding Wheel - Metal - Specification: C60T BF Max Speed DIA. Thickness Code Hole Size Shape 27 D/CT 27 D/C
M/Sec
80 80
RPM
13280 6600
Counter Display Box Superflex Slimline - Specification: A46T (Mild Steel and Stainless Steel) Code
DIA.
GTCW0014/RET 115 Sold in packs of 5 per pack
Thickness
1.0
Hole Size
QTY
200PCS
22.2
Box QTY 25 25 25 25 25
Box QTY 10
Box QTY 25 25 25
Box QTY 25 25 25
Box QTY 25 25
Box QTY 10 10
Description
40 Packs of 5, c/w retail box
Counter Display Box Superflex Slimline - Specification: C60T (Multi-purpose) Code Hole Size QTY Description DIA. Thickness
115 GTCW0021/RET Sold in packs of 5 per pack
Industrial Flap Discs Code
GTFD0030 GTFD0031 GTFD0032 GTFD0033
DIY Flap Discs Code
GTFD0034 GTFD0035 GTFD0036
DIA. 115 115 115 180
DIA. 115 115 115
DIY Diamond Saw Blades Code DIA. GTCW0040 GTCW0041 GTCW0042
48
115 125 230
200PCS
22.2
1.0
Hole 22 22 22 22
Hole 22 22 22
Thickness 2.2/7 2/7 2.2/7
MET
Grit
AZ40 AZ60 AZ80 AZ60
Grit
AZ40 AZ60 AZ80
Hole Size 22.23 22.23 22.23
Box QTY 10 10 10 10
Box QTY 10 10 10
40 Packs of 5, c/w retail box
Professional Light Duty Diamond Disks
Code
dxD(mm)
DP-18580500 DP-18580520
22.2 x 115 22.2 x 230
Code
dxD(mm)
Professional Medium Duty Diamond Disks
Box QTY
1 1 1
DP-18570012 DP-18570042
22.2 x 15 22.2 x 230
WELDING MACHINES
r
rte
e nv
I
Insulation Class H IP21 TORNADO 200
PULSAR 305
1Ph 230/400V 1Ph 230/400V 1Ph/230V Voltage 3.5KVA 2.6KVA 2.6KVA Absorbed Power 50-190A 60-150A 50-150A Welding Current 1.5-4mm 1.5-4mm 1.5-3.25mm Electrode Ø All Awelco welding machines supplied with electrode holder and earth clamp.
1Ph 230/400V 4.7/10KVA 50-200A 1.5-4mm
CLUB 150
Code
CLUB 1850
WM-41090
WM-41124
Type Rated Input Capacity Current Adjustment Output Voltage Rated Duty Cycle Efficiency Electrode Diameter (mm)
WM-42610
ONDULIX 140
1Ph 230V 1.7KVA 35-95A 0.8-0.9 wire
1PH 230V 2,5kVA 5-135A 1.6-3.25mm
WM-11000
WM-56140
Inverter Welding Machines
MMA: c/w Cable Sets ready to use INMIG: c/w Earth Cable & MIG torch Supply Voltage: 230VAC
Code
WM-42305
MIG ONE
SD-MMA-140 MMA 4.1KW 10 - 140A 78V 60% @ 140A 80% 1.6 - 3.2
S-MMA-210
S-INMIG-185
S-EVO-150
MMA 4.4KW 10 - 125A 70V 60% @ 125A 85% 1.6 - 3.2
MIG 6.2KVA 30 - 180A 72V 30% 80% N/A
MMA 7.1KW 10 - 200A 78V 60% @ 200A 80% 1.6 - 4.0
S-EVO-220
MMA 7.9KW 20 - 200A 62V 60% @ 190A 85% 1.6 - 5.0
DIESEL GENERATOR LIGHT TOWER Diesel Powered Generator Light Towers
NDG5LT
NDG9PLT
4.2 18.3A Electric Single Cylinder, 4 Stroke, Air cooler 15hrs 3000 16l 418 2000 x 1100 x (1200 / 6000) 280kg 71dB Oil warning, Voltmeter, Fuel Gauge
9 39.1A Electric 3 Cylinder, 4 Stroke, Water cooled 29.5hrs 1500 135l 1131 2784 x 1360 x (2170 / 8500) 1150kg 66dB Deep Sea 3110 controller
Illuminating Power
2 x 50Watt LED
4 x 1kW Halogen
Tower Max height
5.5m
8.5m
Code Generator Specifications NDG5LT 2x50W LED
NDG9PLT 4X1kw Halogen
Rated kW Rated Current Start Engine Running time (full load) Regulated RPM Fuel Tank Displacement CC Size (LxWxH) Weight (Net) Noise at 7m Standard Items
Light Tower Specifications Lumens
No. Of Mast Sections
GEN
Raise / Lower times
11000 3
9s / 13s
100000 8
12s / 18s
Mast Extension
Hydraulic
Hydraulic
Light Tilt Angle
0-90º
0-90º
Tower Rotation
359º
MET
359º
49
DIGITAL GENERATORS - 230VAC - PETROL
WE NEANG R
Sine wave digital inverter generating sets A new generation of sine wave inverter generating sets with micro processor control. After signal processing a high quality pure sine wave can be acquired with high frequency LC filtering. This type of generator has no waveform distortion offering pure sine wave power with high power factor for instant high loading capacity. A wide range of application areas can be readily assured such as household appliances, computers and communication equipment, medical equipment and other precision instruments. Easy carrying, low noise and "smart fuel saving" features make these generators ideal for household, outdoor and camping requirements.
NIG1000 Code Rated Output kVA Rated current Start DC Output DC Protector AC O/L Engine Fuel Tank Displacement CC Run Time ¾ Loading (Hrs) Normal Running Speed (RPM) Size LxWxH(mm) Weight (Net) Noise Level (7m) Standard Items Wheels
NIG2000
NIG1000
NIG2000
NIG2600
0.9
2
2.6
3.9A
Recoil
8.7A
NIG3000E
3
11.3
13A
12V/ 8.3A
Recoil
Electric+Recoil
Yes
Yes
12V/ 5A
12V/ 8.3A
12V/ 8.3A
12V/ 5A
Yes
Yes
Yes
Yes
149
149
3100-5000
5000
Yes
Yes
2.7l
4.5l
6
6.5
53
5500
NIG3600E
2.6
11.3A
Recoil
NIG3000E
NIG2600
125
5000
Yes
Yes
296 7
2000-6000
12V/ 8.3A Yes 16l
389 8.5
3600
480 x 260 x 410
555 x 305 x 510
620 x 370 x 540
370 x 230 x 320
680 x 480 x 580
750 x 550 x 780
58dB
65dB
58dB
58dB
66dB
68dB
-
-
-
Yes
Yes
Yes
13kg
27kg
29kg
9kg
66kg
AC/DC Circuit protectors, Indicator Light
90kg
ECO-FRIENDLY OPEN FRAME (PETROL)
WE NEANG R
ATS Available for selected models (to be ordered separately)
Features
Rear View
NECO2990E
Code Rated Output kVA/kW Rated Current (A) Starting 12VDC O/P Rated Current Engine Type Fuel Tank Displacement CC Run Time ¾ Loading (Hrs) Normal Running Speed (RPM) Size LxWxH (mm) Dry Weight Noise Level (7M) Standard Items Wheels ATS Code
50
5.0
21.7
Electric+Recoil
12l
6
6.5
NIG5600E
Electric
Yes
Single Cylinder, 4-Stroke, Air Cooled 7l 7l
NIG5600E
NECO2990E
2.0 / 1.7 8.7 Recoil/Electric -
230V Single Phase NECO3990E NECO7990E
NECO3990E
NECO8990E
400V 3 Phase NECO8990TE
6.0 / 5.5 2.6 / 2.3 5.0 / 4.2 7.5 / 6.3 27.7 11.4 21.7 10.9 Recoil/Electric Recoil/Electric Recoil/Electric Recoil/Electric 8.3 8.3 8.3 Single Cylinder, 4-Stroke, Air Cooled 13l 26l 13l 26l 26l 163 196 389 439 439 11 10 9.5 8.5 8.5 3000 597x465x488 597x465x488 945x594x680 945x594x681 945x594x681 50kg 59kg 96kg 103kg 103kg 66dB 66dB 70dB 70dB 70dB 4-in-1 Digital monitor (hour meter, frequency, oil warning, voltage meter) Yes SATS1P36/2P SATS3P18/4P
GEN
• Engine designed to have low fuel consumption • Advanced design of alternator and cooling system provide longer life at high temperatures • Powerful heavy duty engines built to meet stringent European and US emmission controls for generators • Low noise due to new design of silencer made of Al coated steel producing <2dB less exhaust noise compared to normal exhaust system • Easy starting with electric starter supplied with maintenance free battery • Water proof control panel fitted with electromagnetic/pneumatic circuit breaker • Airless flat free wheels
SINGLE PHASE PETROL GENERATORS - 230VAC
ATS-6.6KW-SP ATS Available for selected models (to be ordered separately)
Code Rated Output kVA/ kW Rated Current (A) Starting 12VDC O/P Rated Current Engine Type Fuel Tank Displacement CC Run Time ¾ Loading (Hrs)
Norm Run Speed (RPM) Size LxWxH (mm) Dry weight Noise Level (7m) Standard Items ATS Code Wheels
NPG2500
NPG6500
Petrol Open Frame NPG6500E1 NPG6500 NPG3800
NPG2500
NAC3000E2
NPG12010E
NPG12010E
NAC2500E2
AC King Series NAC3000E2 NAC5000E2
NAC8500E2
2.5 / 2.1 2.0 / 1.7 6.0 / 5.1 4.0 / 3.4 8.5 / 7.2 10.8 8.7 26.1 17.4 37 Electric+Recoil Electric+Recoil Electric+Recoil Electric+Recoil Electric+Recoil 8.3A 8.3A 8.3A 8.3A 8.3A Single Cylinder 4-Stroke VTwin 4-Stroke Air Cooled Air Cooled 25l 13l 13l 25l 25l 40l 15l 389 163 196 439 337 688 163 10 15 11.5 7.5 12 9 15 3000 734x535x559 610x460x460 610x460x460 700x525x560 700x525x560 910x650x846 624x445x435 624x445x435 734x535x557 84.3kg 60kg 62kg 107kg 95kg 175kg 81kg 62kg 41kg 72dB 66dB 66dB 70dB 70dB 78dB 72dB 68dB 68dB Fuel Gauge, Circuit Breaker, Battery, Fuel Gauge, Voltmeter, Circuit breaker, AVR, Battery (electric start only) Digital Display (Voltage, Frequency, Timer & Oil Pressure) SATS1P50/2P ATS-6.6KW-SP Incl. Incl. Incl. Incl. Incl. Incl. Incl. Incl. Incl. 5.0 / 4.25 2.8 / 2.3 21.7 12.2 Electric+Recoil Recoil 8.3A 8.3A Single Cylinder 4-Stroke Air Cooled 25l 25l 389 196 10 17.5
2.0 / 1.7 8.7 Recoil 8.3A
5.0 / 4.25 21.7 Recoil 8.3A
SINGLE PHASE DIESEL GENERATORS - 230VAC
NDG4000CLE
Code Rated Output kVA/kW Rated Current (A) Starting 12VDC 0/P Rated current Engine Type
NDG3500SE
NDG2500CLE
NDG9F
Diesel Open Frame NDG4000CLE NDG5500CLE
4.6 / 4.0 3.0 / 2.5 20 13 Electric+Recoil Electric+Recoil 8.3A 8.3A Single Cylinder 4-Stroke Air Cooled Fuel Tank 12.5l 12.5l 12.5l Displacement cc 418 219 306 Run Time ¾ Load (Hrs) 6.5 14 9 Normal Running Speed (RPM) 3000 Size LxWxH (mm) 745 x 685 x 700 645 x 475 x 550 710 x 475 x 650 Dry weight 105kg 54kg 70kg Noise Level (7m) 85dB 80dB 82dB Standard Items Fuel Gauge, Voltmeter, AC Circuit breaker, Battery (electric start only) Auto Decompression Wheels
Auto Transfer Switch ATS Features
Engine Controller Included
1.8 / 1.5 7.5 Electric+Recoil 8.3A
Incl.
Incl.
NDG17FS
NDG9F
8.0 / 6.8 34.8 Electric 8.3A 3 Cylinder Water Cooled 42l 1357 10 1500 1750 x 790 x 1070 402kg 85dB HGM6120U Engine Controller
Incl.
Auto Transfer Switch
Incl.
NDG3500SE
Diesel Silent NDG5000SE
4.2 / 3.6 2.8 / 2.3 18.3 12.2 Electric+Recoil Electric 8.3A 8.3A Single Cylinder 4-Stroke Air Cooled 15l 15l 418 306 10 12 3000 950 x 550 x 743 950 x 550 x 744 180kg 150kg 71dB 71dB Fuel Gauge, Circuit Breaker, Battery, Digital Display (Voltage, Frequency, Timer & Oil Pressure Incl. Incl.
SKX2-80/4P
NDG17FS
15.0 / 12.8 65.2 Electric N/A 4 Cylinder 4-Stroke Water cooled 42l 2545 10 1500 1570 x 780 x 1050 750kg 65dB HGM6120U Engine Controller No
ATS-5KW-SD N/A SKX2-80/2P ATS-5KW-SD SKX2-40/2P ATS-5KW-SD Auto Transfer Switch Panel Includes: Manual/Auto Switch, LED indication for mains power, generator power, Engine On/Off. Only suitable for use with Navigator gensets. (To be ordered separately)
N/A
Smartgen HGM6120U: Intelligent Control & Monitoring of generator parameters, mains failure/restoration with output for control of optional auto transfer switch.
GEN
51
THREE PHASE GENERATORS - 400VAC
ATS-5KW-SD-3P ATS Available for selected models (to be ordered separately)
Code
NPG6500TE
NPG6500TE
Rated Output kVA/kW Rated current (A) Starting 12VDC O/P Rated current Engine type
6.25 / 5 9.1 Electric+Recoil 8.3A
Fuel Tank Displacement cc Run Time ¾ Load (Hrs) Normal Running Speed (RPM) Size (mm) Dry weight Noise Level (7m)
25l 389 11.5
25l 389 11.5
720 x 485 x 630 85.6kg
700 x 565 x 560 78.3kg
Standard Items ATS Code Wheels
6.25 / 5 9.1 Recoil 8.3A
Single Cylinder 4-Stroke
76dB
NPG6500T
Petrol Open Frame NPG6500T NPG12010TE 10.5 / 8.5 15.4 Electric 8.3A V-Twin 4-Stroke Air Cooled 40l 688 9 3000 910 x 650 x 846 175kg
6.25 / 5 8.2 Electric+Recoil 8.3
Incl.
SATS3P25/4P Incl.
Diesel Silent NDG5000TSE 5.25 / 4.2 7.6 Electric+Recoil 8.3A Single Cylinder, Air Cooled 15l 418 10
6.25 / 5 8.2 Recoil 8.3A
Single Cylinder 4-Stroke 12.5l 418 6.5
12.5l 418 6.5
745 x 485 x 700 105kg
745 x 485 x 700 100kg
78dB 85dB 85dB 76dB Fuel Gauge, Voltmeter, Circuit Breaker, Battery (Electric Start Only)
ATS-6.6KW-TP Incl.
NDG5000TSE
NDG5500CLTE
Diesel Open Frame NDG5500CLTE NDG5500TCL
ATS-5KW-SD-3P Incl.
Incl.
950 x 550 x 743 165kg 71dB
Fuel Gauge, Circuit Breaker, Digital Display (Voltage, Frequency, Timer & Oil Pressure)
ATS-5KW-SD-3P Incl.
THREE PHASE SILENT DIESEL GENERATORS - 400VAC Auto Transfer Switch
NDG21FS3
FGS100FS3
Fitted with Intelligent Control Panel (ICP) & Auto Mains Failiure (AMF) circuits. ATS: Mains Change Over Switchgear Panel to be ordered separately.
Code Rated Output kVA/kW Rated Current (A) Starting
Engine Type Fuel Tank
Displacement cc
Run Time ¾ Loading (Hrs)
Normal Running Speed (RPM) Size LxWxH(mm) Dry weight
Noise Level (7m) Auto Transfer Switch ATS Features Engine Controller Included
52
NDG12FS3
NDG21FS3
NDG28FS3
15.9A
27.5
36.2
11 / 8.8
19 / 15
Electric
3-cylinder, 4-stroke, Water cooled 42l
1617 1500
Electric
Electric
42l
80l
2545
10
25 / 20
10
1500
Diesel Ultra Silent NDG41FS3 NDG33FS3 30 / 24 43.5
55.1
Electric Electric 4 Cylinder 4-Stroke 80l
2834
Water Cooled
2856
10
1500
38 / 30
10
1500
80l
4752 10
1500
NDG66FS3
NDG100FS3
87
130.4
60 / 48
90 / 72
Electric
Electric
100l
100l
4214 10
1500
6871 10
1500
1570x780x1050
1570x780x1050
1660x780x1050
1660x780x1050
1660x950x1050
1900x850x1100
2400x1140x1300
65dB
65dB
65dB
65dB
65dB
65dB
75dB
685kg
SKX2-20/4P
750kg
SKX2-40/4P
900kg
990kg
SKX2-63/4P
1200kg
1400kg
SKX2-100/4P
2300kg
SKT1-160/4P
Auto Transfer Switch Panel Includes: Manual/Auto Switch, LED indication for mains power, generator power, Engine On/Off. Only suitable for use with Navigator gensets. (To be ordered separately) Smartgen HGM6120U: Intelligent Control & Monitoring of generator parameters, mains failure/restoration with output for control of optional auto transfer switch.
GEN
CLEANING & DEGREASING FOR AUTOMOTIVE
Brake Cleaner - 500ml
Multi-Foam Cleaning
Adhesive Spray - Extra Strong
- 400ml
- 500ml
WS-BC
- 5 Litre
WS-MFC
WS-AS
WS-WC
A universal cleaner especially for automotive applications. In comparison with conventional thinners, WEICON Brake Cleaner evaporates without residue. It quickly degreases and cleans metals, glass and many plastics without a problem.
A universally applicable, powerful foam cleaner. WEICON MultiFoam is environmentally sound, bio-degradable, free of phosphate, formaldehyde as well as corrosive and caustic addictives
Special type for permanent and strong bonding of rough and uneven surfaces. A special valve allows small, medium or large adhesive quantities to be sprayed.
Cleans and degreases all materials, plastics, types of rubber, glass, ceramics and wood. It removes grease, oil, resin, rust, wax, nicotine, insect dirt, bitumen and tar specs.
Applications
Applications
Applications
Applications
• Removal of dirt and residue containing oil and grease • On brakes (drum and disk brakes, brake linings, brake shoes, cylinders, springs and bushings) • On clutches (clutch linings and clutch parts) • On engine parts (carburators, petrol and oil pumps, gears, etc.)
• Cleans all glass, metal & plastic parts without leaving residue • Thoroughly eliminates insects, smears and protective films • Gently removes stains from rugs and upholstery • Cleans and cares for all plastic and lacquered surfaces on boats, motorcycle casings and bicycles • Dissolves dirty layers from fittings and tiles
Code
For bonding big surfaces of • Felt, PVC foil, imitation leather, carpets • Plastics and paper • Foam and sponge rubber • Insulating material, flexible foam plastics • Vinyl, leather, rubber, metal and wood
LUBRICATING & MULTIFUNCTIONAL OILS
W44T Turbo-Power Spray - 400ml
Code
Workshop Cleaner
Silicone Spray
- 400ml
AT-44 Allround Spray
- 400ml
WS-SS
W44T covers a wide range of industrial and maintenance applications. Due to its special formula and excellent creep properties, corrosion protection, water-resistance, lubrication, preservation and cleaning are combined in one product. W44T offers good protection against atmospheric influences. For this reason, it is used almost unlimitedly in the areas of workshops, automobiles, shipping, electrical systems, agriculture, household and hobbies.
Silicone Spray is an ideal lubricant and separating agent for rational production and servicing. At the same time, it assumes the function of a preservative and care product for plastic, rubber and metal.
P3
Rust-Shock
- 400ml
WS-AT44
WS-W44
• Machines - all kinds of tools • Work shop facilities, e.g. work benches, shelves, sliding doors, industrial flooring • Motor vehicles, e.g. forklift, trucks, pallet trucks, indoor transporters • Motor parts, e.g. oil sumps, valve covers, starters, generators
AT-44 Allround Spray with PTFE is used in all industrial and workshop areas. Due to its special formula and its very low coefficient of friction resulting from the high percentage of PTFE, corrossion protection, cleaning, water-resistance, lubrication, and conservation are combined in one product.
WS-RS Rust-Shock, the "chemical screwdriver" loosens all kinds of rusted screw connections: it works within seconds due to its two-fold function: • The special composition of the materials generates a "chill effect" on the corroded workpiece. Rust-Shock deeply penetrates into these small spaces created by this cold shrinking process due to its high capillary effect. • There, it loosens the rust crystals in seconds and thus neutralises the connection between the rust layers.
53
CLEANING & DEGREASING - 500ml
- 500ml
- 200ml
WS-CS
WS-AR
WS-TFT
Electro Contact Cleaner is used for fast and efficient cleaning and degreasing of soiled or corroded contacts of all kinds. Removes oxide or sulphide layers, combustion residues as well as resinous or sooty soiling from measuring instruments, tools, scales, switches, sensors, etc. Reduces voltage losses and increases the electrical conductivity. This product is neutral against metals, plastics, elastomers, lacquers and coatings. It evaporates very quickly and does not leave any residues.
Cleaner Spray S degreases and cleans all metals, glass, ceramics and many plastics. Cleaner Spray S evaporates quickly and works without residue. No residual layer remains as is the case when thinners is used.
Sealant and Adhesive Remover dissolves and quickly eliminates sealant and hardened adhesive residues.
The ideal product for the cleaning and care of sensitive plastic and glass surfaces. It removes dirt, dust, grease and nicotine and cleans carefully without leaving residues. Its antistatic effect provides a dirt and dust-repelling surface. Reduces glare.
Applications
Applications
Applications
• Cleaning and degreasing before painting • Before the use of other Weicon products, where a greasy substrate would impair the effect, eg. during adhesion • Cleaning of machine parts
Plastic Cleaner - 500ml
• Dissolves all types of sealant residues from cylinder heads, oil pans, water pumps, exhaust manifolds, valve covers and gear flangs. • Reliably removes carbon residues, paints and laquers • Eliminates oils, resins, greases and tar • Removes all kinds of adhesive, even hardened adhesive.
Compressed-Air Spray
WS-PC
Applications
• Cleaning and degreasing of: ‣ Sensitive plastics like thermoplasts (PVC, PMMA = plexiglass, polystyrene, etc.) eg. window frames, roller blinds, plastic profiles ‣ Rubber materials such as seals ‣ Lacquered surfaces, such as powder-coated metal parts • Removal of label and sticker residue. * Check surface compatibility prior to use.
• All kinds of thin film transistor and liquid crystal displays (eg. computers, notebooks, television sets, mobile phones, copiers, scanners, touch-screens) • Plastic casings of computers, scanners, copiers or television sets.
Hand-Protective Foam
- 400ml
Plastic Cleaner is the ideal product for the cleaning and degreasing of sensitive surfaces.*
54
TFT/ LCD Screen Cleaner
WS-ECC
Code
Code
Sealant & Adhesive Remover - 400ml
Cleaner Spray S
Contact Cleaner
- 200ml
WS-CA
Compressed-Air Spray can be used to remove dust resistant to conventional cleaning methods. It permits dry, contact-free cleaning, even in inaccessible angles and on sensitive surfaces.
Freeze Spray - 400ml
WS-HP Hand Protective Foam forms a greaseless, invisible and waterresistant protective film that does not let various kinds of soiling penetrate the skin and pores. This 'invisible glove' protects against hazardous substances and irritants from aggressive chemical substances, the care effect is considerably improved.
P3
WS-FS Freeze Spray has many uses, eg. fault-finding in electronics as well as repair & maintenance in industrial sectors. It cools parts down to -45°C and allows pin-pointed chilling of even the smallest parts. Freeze Spray is nonconductive and is suitable for any material (except plastics). Applications
• Assembly pieces made of metal such as ball-bearings, bushes, chain-links, shafts etc can be fitted in closest fits with Freeze Spray. • Thermal overloading faults in electrical circuits are found easily through local freezing. Useful also for maintenance works in the field of production and repair as well as in motor mechanics (eg. cooling of engine components).
SURFACES & CORROSION PROTECTION
Contact Spray & Lubricant - 400ml
Code
Stainless Steel Spray
Corro-Protection
- 400ml
WS-CC
Contact Spray is based on a special combination of active ingredients for the care and protection of electrical contacts and components. Dispels moisture from the electrical contacts, prevents leakage current and voltage loss and keeps contacts, fuses, cable connections, etc free of oxidation and sulphide deposits. Applications • Penetrates and dispels moisture and water. • Dissolves oxide deposits from contact points. • Protects permanently against oxidation and corrosion.
- 400ml
WS-SST
WEICON Stainless Steel Spray is a corrosion and weather resistant surface coating. Due to the high chemical resistance, it can be used wherever a resistant, effective protective layer is required. The alloy is composed of chromium, nickel and manganese. Applications • For the repair of damaged stainless steel parts • On lorry attachments • On silos and pipelines • Outdoors (weather-resistant) • For the optical refinement of glass, wood, stone, ceramics and most plastics • For decorative purposes
Rust Protection 2000 Plus
Code
- 400ml
WS-CP
WS-COS
Corro-Protection lastingly preserves tools and precisions parts made of metal for inside storage and overseas shipping, with a dry, waxy protective film.
WEICON Cockpit Spray is a waterrepellent cleaning agent for all plastic and rubber parts. The lasting, invisible protective film prevents soiling and creates an easy- care, dust resistant, silky shine.
Applications
Applications
• Safe corrosion protection of plain, unlacquered metal parts through a transparent protective film • Inside storage of work pieces • Corrosion protection in case of overseas shipping • Preservation of tools and precision parts. As required, the protective film can be removed easily (e.g. with WEICON Cleaner Spray S).
• Eliminates squeaking and creaking noises • Cares for dashboards, inside cladding, all plastic and rubber parts, leather, wood and chromium as well as car roofs covered with synthetic leather • Prevents the freezing of door, window and boot seals • Used as a lubricant for safety belts, seat guides, skylights, window guides, locks and wherever grease causes soiling
Bio-Cut
Alu-Grinding Protection - 400ml
- 400ml
- 400ml
WS-AGP
WS-RP
Cockpit-Spray
WS-BIO
Rust Protection 2000 PLUS is used wherever metal constructions and installations, which a re exposed to extreme ambient and weathering conditions, have to be protected with a long-lasting and optically attractive layer. Temperature resistant from (-50°C (-58°F) to +300°C (+572°F)
WEICON Alu Grinding Protection works like a cooling lubricant and separating agent during the grinding process. It lowers the temperature at the contact point and forms a silicone-free anti-adhesive layer on the abrasive material.
Due to its particularly high lubricating effect, WEICON Bio-Cut permits higher speeds and longer service lives, resulting in a higher cutting performance of tools.
Applications
Applications
Applications
Effective with all abrasive materials on substrates like: • Serrated grinding wheels and flap wheels • Fibre wheels, sheeting and endless grinding bands • Abrasive sleeves, orbital sanders and special machines
• Hall and steel constructions • Iron railings, lattice towers • Fences, handrails and balcony railings • Movable gates and outdoor lamps • Renovation of intact lacquer coatings and all parts with high corrosion risk, e.g. welding seams, threads, edges, screws and nuts
P3
• Drilling and turning • Milling and reaming • Sawing and punching • Thread cutting of all types of steel, castings, stainless steel, copper, brass, aluminium and their alloys
55
Zinc Spray
SURFACES & CORROSION PROTECTION Zinc Spray "Bright Grade"
- 400ml
Aluminium Spray A-100
- 400ml
Copper Spray
- 400ml
Cold Galvanising
Code
WS-ZSB
WS-ZS
WS-ALU
Aluminium Spray contains aluminium pigments with a purity grade of > 99.5% and offers high quality corrosion protection for all metallic surfaces. Aluminium Spray WS-ALU is abrasionresistant.
Zinc Spray offers quick-drying corrosion protection with a long-term effect for all metals. Applications • As high-quality rust-protection primer. • For touching-up welded or drilled sections. • As a conductive intermediate layer in spot-welding. • Wherever metal must be protected from corrosion.
Applications
In addition to the above-mentioned applications, Zinc Spray "Bright Grade" is preferred for the repair of damaged zinc coatings in the same colour.
• In refrigeration & ventilation technology • In combustion plants. • In pipelines and machine housings. • In exhaust systems (only on end pipes) • On fibre-glass car body parts. • In model construction, applied art and toy manufacturing.
WS-COP
Copper Spray is a high-quality, weather-resistant, highly adhesive metal spray for protective and decorative coatings, with an effective nonferrous metal character for indoor and outdoor use. It is even used for the optical refinement (copper-plating) of various metal surfaces or design parts. Applications • Sheet metal window sills. • Roof gutters and drainage pipes. • Outdoor lights and mailboxes. • Craftwork and decorating.
LUBRICATING & MULTIFUNCTIONAL OILS
Universal Spray-On Grease
- 400ml
- 400ml
Strongly adherent and high-pressure resistant long-term grease with MoS₂. Friction and wear are lastingly reduced. Temperature range: -20°C (-4°F) to +120°c (+248°F) Applications • Roller and slide bearings, joints, levers and slideways • Spindles, camshafts and splined shafts, springs • Open gearing (such as gear rims), worm gear pairs at all slide speeds permissible for grease lubrication. • Bearings and joints of rolling mills, tool, agricultural and construction machines as well as rail and street vehicles and many others.
All Round Lubricant Type
Chain & Rope Lube Spray
- 400ml
WS-RL
WS-US
Code
56
Rust Loosener & Contact Spray
PTFE-Spray - 400ml
WS-CR
Rust Loosener and Contact Spray is indispensable for repair, servicing and maintenance. Temperature resistant from -20°C (-4°F) to +150°c (+302°F) Applications • Loosens rusted and sluggish parts, screw connections, bolts, joints and hinges • Dispels water from ignition systems • Secures the function of mechanical parts and contacts, for example on distributor caps and spark plugs • Protects permanently against corrosion and oxidation • Lasting lubrication of sliding surfaces • Cares for and cleans metal surfaces, metal parts and electrical parts
WEICON Chain and Rope Lube Spray is synthetic, transparent adhesive lubricant for the permanent lubrication of all kinds of chains and wire cables. WEICON Chain and Rope Lube Spray is temperature- resistant from -40°C (-40°F) to +200°C (+392°F), strongly adherent and pressure-resistant, sound absorbent, water-resistant and has excellent creep properties. Applications • All kinds of chains and wire cables. • Fast-moving machine parts • Joints and couplings • Roller and ball bearings • Spring assemblies
WS-PTFE WEICON PTFE-Spray adheres to all metal, plastic and wood surfaces. Due to the high PTFE percentage, the coeffecient friction is considerably reduced. Temperature resistant from -810°C (-292°F) to +250°C (+482°F) Applications • On side rails and guides • On conveyor belts, transport rollers and transport chutes • On windows: Tipping mechanisms, locks, hinges • On cutting tools and packaging machines • As continuous lubrication for shafts in plastic bearings
AL-W Special lubricant and corrosion protection, Code also for underwater applications (classification to *Add to code: DIN 51 502: KPL 1-2E-25). Effective protection against aggressive liquids (e.g. salt water, sewage water) in maritime areas and in wet plants. Temperature range: -25°C (-13°F) to +80°C (+176°F)
P3
WST-AL-W* 400g 1kg 5kg 25kg
400g tub 1kg tub 5kg tub 25kg tub
ELASTIC ONE-COMPONENT ADHESIVES & SEALANTS Code
Flex 310 M Classic - 310ml WST-310CL-*
Elastic one-component adhesive and sealant on an MS polymer basis.
Advantages • Free of silicone and halogen.
• Can be painted over immediately† (wet in wet). • Very good adhesion without primer on most surfaces. • Excellent aging stability. • Good UV stability. • Resistance to salt water. • Solvent-free, odour-free. *Add colour to code: WH (White), BK (Black), G (Grey)
† Only "wet in wet" within 3
hours at the latest after material application with suitable paint coating systems (with exception of alkyd resin paints).
Code
Solarflex - 290ml WST-310SOL-WH Elastic one-component adhesive and sealant with fast development of adhesive strength. For strongly stressed adhesive bonds in the following areas: • Solar Power systems • Junction Boxes • Marking systems • Metalworking • Tank and apparatus construction. • Ventilation and air conditioning
Advantages • High initial adhesive strength • Broad range of adhesion • Resistant to weathering and UV • Free of silicone, isocyanate and halogen • Solvent-Free, odour-free, noncorrosive • Sandable & can be painted over
Flex 310 M Super-Tack - 290ml WST-310SUP
Elastic one-component adhesive and sealant with fast development of adhesive strength, on an MS polymer basis. Flex 310 M Super-Tack has a very high initial adhesive strength and so enables adhesive bonds on vertical surfaces indoors and outdoors.
Advantages • Broad range of adhesion, even on moist surfaces. • Colourfast and resistant to weathering and UV. • Free of silicone, isocyanate and halogen. • Solvent-free, odour-free, non-corrosive. • Can be painted over immediately† (wet in wet). • Sandable (after hardening).
Flex 310M Crystal - 310ml WST-310CRYSTAL
Transparent (crystal-clear) elastic adhesive on MS polymer basis is excellent for adhesion on glass, PC, PMMA and acrylic glass. Therefore it is especially suited for elastic connections in which the adhesive is not to be or must not be visible.
Properties • Crystal-clear curing • Free of silicone, isocyanate & halogen • Excellent aging resistance • Good UV stability • Resistant to fresh and salt water • solvent-free, odour-free • If necessary, can also be painted over** ** Only “wet in wet”, within 3 hours at the latest after material application with suitable paint coating systems (except alkyd resin paints)
Aqua-Flex - 310ml WST-AF-*
Special adhesive and sealant for a variety of applications, also on wet and humid surfaces. Aqua-Flex is gap-filling and cures practically without shrinkage to a permanently elastic material.
Advantages • Sealing tubes and water pipes • the repair of tiles and joints, even under water¹. • Bonding decoration elements in gardens, PVC foils, etc. • sealings in humid areas and in the sanitary sector² • Bondings and repairs in the maritime sector. • Repair of roof leakages³ *Add colour to code: WH (White), BK (Black), G (Grey) ¹ not suitable for applications in chloric water. ² bacterial infestation possible. ³ not compatible on bituminous surfaces.
Blackseal WST-BLS-* Black-Seal is especially suited for the use in machine construction and engineering as well as for engine and car manufacturing. It provides excellent adhesion on aluminium, steel, glass, ceramics and many other materials. Areas of application are amongst others engines, water pumps, gears, boxes and axles, oil sumps etc. • Excellent resistance to oil & grease • Temperature resistant from - 60°C (-76°F) to +280°C (+536°F), briefly (<3 hours) up to +300°C (+572°F) *Add Tube size to code: 85 - 85ml 200 - 200ml 310 - 310ml
SPECIAL ADHESIVE SILICONE Flex + Bond WST-FB*
Code * Add Type to Code: WH - White 85ml x 1 BK - Black 85ml x 1 GR - Grey 85ml x 1 CL - Clear 85ml x 1 Counter Display Populated with Flex+Bond (Stock & Display ordered separately)
DISPLAY - Counter Display for 20 x 85ml tubes
WST-FB-DISPLAY
WEICON’s Flex + Bond remarkable features are its wide range of application possibilities and the high adhesive force. It bonds and seals nearly all materials such as metals, wood, plastics, glass, ceramics to themselves and among each other and is therefore the excellent product for a great variety of repairs and bonding as well as for the sealing of seams and joints.
P3
57
ANTI-SEIZE HIGH-PERFORMANCE ASSEMBLY PASTES
Anti-Seize - 120g, 450g & 500g
Code
Anti-Seize High-Tech
Code
WST-AS*
*Add to code: 120 - 120g tub, 450 - 450g tub, 500 - 500g Brushtop Can
WST-HT*
*Add to code: 120 - 120g tub, 450 - 450g tub
Anti-Seize Standard Grade consists of selected, finely ground, metallic solid lubricants and a high-quality synthetic oil mixture.
Properties
Anti-Seize High-Tech is metalfree and can be used with any material.
• Temperature range: -180°C to +1200°C • Colour: anthracite • Basic oil: synthetic oil mixture • Solid lubricants: various metallic powders • NLGI Class: 1 • Corresponds to MIL 907 D
Properties • Temperature range: -40°C to +1400°C • Colour: White • Basic oil: Medicinal Oil • Solid lubricants: Minerals • NLGI Class: 0-1 • Corresponds to MIL 907 D
• Prevents corrosion, fretting corrosion, oxidation, seizure, cold welding, wear and abrasion • Reduced friction and stick-slip • Provides good sealing and shut-off properties against liquid media.
Code
Repair Sticks Steel WST-ST* Preferrably used for quick and high-strength repairs and bonds of metal parts. Patches and seals cracks, holes, leakages and surface damages on: • machine parts. • tanks and conduit pipes. • vessels, pumps and housings. • balcony grids. • stair raillings. • stripped threads. Suitable as a universal repair compound in the whole D.I.Y. and household sector
REPAIR STICKS Repair Sticks Aqua WST-AQ*
Ideal for quick repairs on damp and wet surfaces and for underwater applications. Patches and seals cracks, holes, leakages and surface damages on: • fuel and water tanks. • radiators • electrical switchboards. • sanitary installations. • swimming pools. • and in the marine sector.
Anti-Seize High Tech is particularly suited if: • Metalliferous pastes could cause electrolytic reactions • Nickeliferous products should not or may not be used for health reasons • Dark, metalliferous producs should or may not be used for optical reasons
Repair Sticks Plastic WST-PL* Especially for durable repairs of plastic parts* and fibre-reinforced materials (GFRP, CFRP, fibre-glass) with residual elasticity as well as for bonding of metal parts. • pipes and pipe elbows. • fittings and flanges. • water tanks. • window and door frames. • pumps and pump housings. • coverings and bumpers. *except for plastics such as PE, PTFE, etc.
*Add to code: 57 = 57g stick; 115 = 115g stick
Code
Repair Sticks Wood WST-WO*
For permanent and elastic, non-shrink repairs of wooden parts, seals, gaps on: • timber boards and planks. • veneers • window and door frames. • model making (airplanes, ships, etc.) • wooden toys. Suitable as a universal repair compound in the household and hobby sector.
*Add to code: 28 = 28g stick; 56 = 56g stick
58
Repair Stick Titanium WST-TI*
For permanent high temperature (briefly + 300°C) and wear resistant repairs & bonds of metal parts. Patches and seals cracks, holes, leakages & surface damage on: • tanks • aluminium, light metal & diecast parts • shafts, bearings, pumps & casings • reconditioning of defective threads Suitable as a universal repair compound for high temperature use.
*Add to code: 57 = 57g stick; 115 = 115g stick
P3
Repair Stick Aluminium WST-ALU*
For quick non-rusting repairs & bonds of metal parts. Patches & seals cracks, holes, leakages & surface damage on: • car bodies • transmission casings • window frames & profiles • boats • model making (e.g. cars. trains) Suitable as a universal repair compound in the hobby and garden sectors.
PLASTIC METAL
Weicon plastic metal is ideal for providing fast, cost effective & durable repairs to many different types of material. These are two-component epoxy resin systems. Depending on type, the resin component is filled with either steel or aluminium powder or in some cases, a mineral filler. After mixing two components Weicon Plastic Metal hardens to a firm, metal-like material which immediately adheres to almost every kind of surface. The material does not shrink while curing. The cured material can be machined.
Code Type
Type A WST-PM-A/*
Type BR WST-PM-BR/*
Putty, Steel Filled (-35°C to +120°C)
Putty, Bronze-Filled (-35°C to +120°C)
• Repair of corrosion damage & pitting on tanks • Repairs of pipes & castings • Repairs of cracks on housings & machine parts • Making of moulds, models, tools & fixtures *Add to code - 0.5kg - 0.5kg tub, 2kg - 2kg tub Application
• Filling of blow holes & rebuilding of bronze parts (Ship pro pellers) • Repairs to bronze castings • Patch-up or rebuilding where brazing is not possible.
Ceramic BL Code Type Application
Type SF WST-PM-SF/*
Type UW WST-PM-UW/*
Putty, Steel Filled, Fast Curing (-35°C to +90°C) • For quick repairs an bonding on leaky pipes, housings and gears (pot life ± 5min) • For making anchorages • For making fixing devices
Putty, Titanium Filled, Cures under water, Salt Water Resistant (-35°C to +120°C) • Pipes, pumps, valves, tanks, vessels and trays • Marine & Offshore sector • Sewerage Installations • Wherever moisture leads to bonding problems
WST-PM-BL
Liquid, brushable, mineral (carborundym & zircon) filled. Extremely water resistant, high temperature (-35°C to +180°C) • Lining highly stressed pump cases • As wear proteciotn for slide bearings, slides, funnels & pipes • For repairing castings, valves, & blower vanes
*Add to code - 0.5kg - 0.5kg tub, 2kg - 2kg tub
Casting Resin - MS1000 - 1.0kg Code Type Features
WST-MS1000
Liquid, unfilled, transparent (-35°C to +120°C)
• Unfilled epoxy resin, low viscosity • Casting & Laminating resin system suitable for many different applications • May be filled with a variety of different fillers to produce highly filled backings
SPECIAL ADHESIVES
Code
Epoxy Minute Adhesive - 24ml WST-EMA
Fast Metal Minute Adhesive - 24ml WST-EMMA
Epoxy Minute Adhesive is useful on numerous materials such as metal, plastic, fibre reinforced materials, ceramics, glass, stone and wood.
• Suited for construction and assembly work • Residual elasticity, shock proof, extremely high adhesive strength • Viscid, self-levelling • Very short pot-life (3-4 min) • Fast Curing • Almost colourless, glass clear
Code
Due to its high viscosity (paste consistency), this steel-filled adhesive can not only be applied to vertical surfaces. It can also be used to fill cracks, bubbles and uneven surfaces. Ideal for repairs requiring large tolerance gaps to be bridged. Steel filled, shock proof, extremely high adhesive strength.
Mixing and Dosing System WST-MIXER
Dosing System can be used to mix and apply in one working operation.
WST-QUADRO
Quadro Mixing Nozzle for all easy mix types except metal. • Paste consistency, gap filling • Very short pot life (3-4 minutes) WST-HELIX • Quick-curing • Machinable (grinding,filing,drilling etc.) • Colour Anthracite Helix Mixing Nozzle for easy mix metal.
Rubber Metal Adhesive WST-GMK2410-*
Used for strong, flexible full-surface bonding of rubber to rubber and rubber to metal. Applications • Bonding rubber to metal plates • Bonding rubber profiles, door seals in motor vehicles etc. • Fixing insulation materials or sound absorbing materials to construction parts • As an economical all round contact adhesive for industrial applications.
P3
*Add to Code 185 - 185g Tube 300 - 300g Can 700 - 700g Can
59
THREAD LOCKING & SEALING
Anaerobic Adhesives & Sealants - Locking • Sealing • Retaining • Gasketing Field of application: Threadlocking • Screws & nuts • Stud bolts WEICONLOCK
nut
WSA-302-43 Threadlocking
Code
WSA-302-62 Threadlocking
WSA-302-71 Locking of threads and stud bolts
Viscosity at Gap filling For thread+25°C in capacity in ed joints mPs's mm max. up to Brookfield
Application
WSA-302-43 Universal threadlocking type: WSA-302-62 WSA-302-71 WSA-305-72 WSA-306-38
high viscosity, medium strength, disassembly with normal tools Threadlocking: higher viscosity, high strength, hard to disassemble. Locking of threads and stud bolts: medium viscosity, high strength, hard to disassemble. Pipe and flange sealing (with PTFE): instant seal, high viscosity, medium strength, disassemble with normal tools. Retaining cylindrical assemblies under high dynamic stress: fast-curing, medium viscosity, high strength, hard to disassemble.
WSA-306-38 Retaining cylindrical assemblies
WSA-305-72 Pipe and flange sealing
bolt
Field of application: Flange sealing, gasketing • Flanges • Casings • Lids flange
Colour
Temp. resistance
Available as
2.000 7.000mt
0.25
M 36
blue
-60°C to +150°C
50ml
1.500 6.500 mt
0.25
M 36
red
-60°C to +150°C
50ml
500lt
0.15
M 20 R¾"
red
-60°C to +150°C
50ml
17.000 50.000ht
0.40
M 80 R 3"
white
-60°C to +150°C
50ml
2.500mt
0.20
M 36
green
-60°C to +150°C
50ml
WEICONLOCK
Field of application: Sealing of threaded pipes and fittings • Threaded connections • Hydraulic and pneumatic systems • Cooler and compressed air systems WEICONLOCK
pipe bend
pipe plug
CYANOACRYLATE ADHESIVES (SUPER GLUE)
Contact Cyanoacrylate Adhesives are cold-curing one-component adhesives, free of solvents. They quickly polymerise by reacting with moisture both on the surfaces to be bonded and from the air and cure under light pressure. They will bond within seconds almost all materials to and among each other, such as: metals, plastics, glass, ceramics, wood, leather and natural & synthetic rubber. Available Pack Sizes: 12g & 30g
Code 12g Code 30g
60
Contact VA 100
Contact VA 8312
Contact VA 1500
Contact VA 2500 HT
WSA-VA100-12 WSA-VA100-30
WSA-VA8312-12 WSA-VA8312-30
WSA-VA1500-12 WSA-VA1500-30
WSA-VA2500-12 WSA-VA2500-30
• Medium viscosity 60-120 mPa's. • Somewhat longer curing. • Universal type for bonding metals, plastics and rubber to and among each other. • the ideal adhesive for the D.I.Y. sector.
• Low viscosity, 20-40mPa's. • Very fast curing. • For bonding of numerous rubber materials (eg solid rubber or cellular rubber) and plastics. • especially suitable for bonding EPDM elastomers. • Also suitable for bonding polyolefines (PE-Polyethylene, PP Polypropylene) in combination with WEICON CA-Primer. • The ideal adhesive in combination with WEICON Filler for instant bonding and filling cracks, gaps, holes and irregularities.
P3
• High viscosity, 1000-1500 mPa's. • Slow curing. • For bonding rubber and plastics • Suitable for absorbent and pourous materials such as wood, cork, leather and ceramic.
• High viscosity, 2000-3000 mPa’s. • Slow-curing • Residual elasticity after curing • Suitable for ever changing climatic conditions. • Excellent peel and shock resistance. • The ideal for bonding different rubber materials and plastics as well as metal to plastic.
RUBBER INSULATION COMPOUNDS
Liquid Rubber
Two component
Two component. IP68 protection
Code
GLB030 GLB1
Description
Code
GBP050
2 x 150g bottles 2 x 500g bottles c/w measuring jug and spatula
• Fire-resistant • Fast setting: 10mins @20˚C • Suitable for installations up to 1kV
GSB030 GSB1
2 x 250g tubs
• Fire-resistant • Application: Protection of joints Custom cable break-outs • Sealing of junction boxes
INSULATION GELS Insulation Gel Kit
Two component. IP68 protection
Two component. IP68 protection
Code
Description
• Fast curing: ± 5mins • Remains flexible and elastic • Non-toxic, re-accessible and mouldable
• Dielectric strength: 20kV/mm • Sets even at low temperature
Insulation Gel Bottles
Rubber Paste
Code
Description
GSB030BL
2 x 150g bottles 2 x 500g bottles c/w measuring jug and spatula
GSB040BL
• Re-accessible • Fast setting: 10mins @20˚C • Suitable for installations up to 1kV • Dielectric strength: 20kV/mm • Sets even at low temperature
Description
1 x 300g Gel Bag for 80x80x40mm Junction Box 1 x 400g Gel Bag for 100x100x60mm Junction Box
• Re-accessible • Fast setting: 10mins @20˚C • Suitable for installations up to 1kV • Dielectric strength: 20kV/mm • Sets even at low temperature
Insulation Gel Tub Ready to use. IP68 protection
Code
GSM030 GSM1
Description 300g tub 1kg tub
• Re-accessible & reusable • One component ready to use • Especially useful for vertical installations • Totally transparent • Excellent dialectric properties
NANO PROTECH - PROTECTIVE COATING Protective coating against moisture, corrosion & short circuiting Code
For a demostration of the product's effectiveness scan the code
JT-SPR-NNT-110
Working Principle
Based on new nano-zeolithe-technology with a slightly oily consistency, the coating crawls under rust & oxidation (binds them) and humidity, forming a 3D multifunctional protective barrier network at the interface. Intelligent and dynamic, the coating ensures a water repellent barrier at all times. When components are connected, the coating "opens up" and allows electronic exchange.Disconnecting components then causes the coating to "close up" over the newly exposed metal surfaces to prevent short-circuiting.
Suitable Substrates
Brass, Aluminium, Stainless Steel, Raw Iron, Zinc, etc. (Does not react with plastics, rubber, glass, varnishes, ceramics & fabrics.) Depending on mechanical strain up to 1 year
Durability
Water Displacement
100% in 10 seconds
Applications - Generally used anywhere where moisture & humidity causes failures, applications include but are not limited to: • Electrical Cables, contacts, fuses which have not been protected or isolated against humidity • Electrical equipment & facilities of all kinds • Corrosion prone metal surfaces of all kinds such as brass, aluminium, stainless steel,raw iron, zinc, brazing solder etc. • Electrical plug points, adaptors, connectors, cellphones, laptops, TV Monitors, speakers, outdoor lighting devices • Sound equipment, cameras, measuring devices, sensors, telecommunication aerials • Automotive,marine, aeronautical electrics • Extreme Sports & Outdoor research equipment
P3
61
ADHESIVES Silicones
Code
Details Size Qty. per box
JT-SIL-BL-BW
Bath White Blister 90ml 12
JT-SIL-BL-SC
JT-SIL-BX-SC
JT-SIL-BX-BW
JT-SIL-CT-ASW
JT-SIL-CT-GCL
Clear Box 90ml 24
Shower Clear Blister 90ml 12
White Box 90ml 24
Silicone Sealants - Cartridges
Code
Details Size Qty. per box
Code
Details Size Qty. per box
JT-SIL-CT-SC
Silicone Shower Clear 280ml 24
JT-ADH-BL-GCL Clear Adhesive 50ml 18
JT-SIL-CT-BW
Acrylic Sealant White 280ml 24
Silicone Bath White 280ml 24
Adhesives / Contact Adhesives
JT-ADH-BL-GCO
Contact Adhesive Blister 50ml 18
JT-ADH-BX-GCO
Contact Adhesive Box 50ml 96
Clear 260ml 24
JT-ADH-TN-GCO Contact Adhesive 250ml 24
Super Glue
Code
Details Size Qty. per box
62
JT-SGL-DC
Super Glue Display Card 3g x 12 24 Cards
JT-SGL-BL
Super Glue Single Card 3g 50
P3
JT-SGL-DB
Super Glue Bottle Display Box 3g x 25 1
ADHESIVES & LUBRICANTS Foams / Sprays
Code
Details Size Qty. per box
Code
Details Size Qty. per box
JT-SPR-FMF-750 PU Filler Foam 750ml 12
JT-ADH-CT-COR
Cornice Adhesive 280ml 24
JT-SPR-LB-400
JT-SPR-SIL-400 Silicone Spray 400ml 12
Lube Spray 400ml 12
Miscellaneous Adhesives
JT-ADH-BKT1-COR Cornice Adhesive 1kg 24
JT-ADH-BKT2-COR Cornice Adhesive 2kg 8
JT-ADH-BX-PVCC PVC Cement H/P 100ml 72
JT-ADH-TN-PVCC PVC Cement H/P 250ml 20
TAPES
Double Sided Tape - Prepacks
Code
Details Size Qty. per box
Code
Details Size Qty. per box
JT-DST-BL-AT3-1
Double Sided Auto Tape 0.8mm x 12mm x 1m 12
JT-DST-BL-MN5-1
Double Sided Tape 1.5mm x 18mm x 1m 12
JT-DST-BL-MN8-1 Double Sided Tape 3mm x 18mm x 1m 12
Double Sided Tape - Large Rolls
JT-DST-BL-MN8-0.5 Double Sided Tape 3mm x 18mm x 500 12
JT-DST-LR-NPU1-60 JT-DST-LR-NPE4-15 JT-DST-LR-NPU4-60 JT-DST-LR-NPU7-60 JT-DST-LR-NPU8-30 JT-DST-LR-NPE8-20
Double Sided Tape Double Sided Tape Double Sided Tape Double Sided Tape Double Sided Tape Double Sided Tape 0.8mm x 6mm x 60m 0.8mm x 18mm x 15m 0.8mm x 18mm x 60m 1.6mm x 18mm x 60m 3mm x 18mm x 30m 3mm x 18mm x 20m 1 1 1 1 1 1
P3
63
6mm width
Double Sided Tape HB - High Bond 12mm width
JT-DST-LR-HB1-33-*
Code
Details Size Qty. per box
HB Red Liner 0.8mm x 6mm x 33m 1 *Add colour to code: C (Clear) or GR (Grey)
Code
24mm width
JT-MT-LR-18-40 Masking tape 18mm x 40m 48
Warning Tape
JT-DST-LR-HB2-33-* HP Red Liner Tape 0.8mm x 18mm x 33m 1
HP Red Liner Tape 0.8mm x 12mm x 33m 1
Duct Tape 48mm x 5m 30
Duct Tape 48mm x 25m 24
*Add colour to code: W(White) ,BK(Black) or S(Silver) Barrier Tape
JT-WT-LR-Y/BK-33
Masking tape 48mm x 40m 24
PVC Floor Tape
JT-DT-LR-25M-*
JT-DT-LR-5M-*
Barrier Tape
JT-MT-LR-48-40
Masking tape 24mm x 40m 36
25m
PVC Warning Tape (Non-Stick Tape)
48mm width
JT-MT-LR-24-40
Duct Tape
5m
18mm width
JT-DST-LR-HB3-33-*
Masking Tape
18mm width
Details Size Qty. per box
TAPES
Anit-Slip Tape
JT-WT-LR-R/WH-33
Yellow/Black warning tape Red/White warning tape 0.15mm x 75mm x 500m 0.15mm x 75mm x 500m 1 1
Reflective Tape
Stick-On
Code
SA3561
Details Size Qty. per box
JT-FT-LR-P14-*-33
Skull & Cross Bones warning tape: PVC Floor Tape Electrical cable buried below 150mm x 500m 0.15mm x 50mm x 33m 1 30 *Add colour to code: WH (White), BK (Black), R (Red), GN (Green), BL (Blue) or Y (Yellow). For double colour: Y/BK (Yellow/Black) or R/W (Red/White)
JT-AST-LR-5M-* Anti-Slip Tape 50mm x 18m 1 *Add colour to code: BK (Black). For double colour: Y/BK (Yellow/Black)
JT-RT-LR-SA48-50-*
Standard Reflective Tape Double colour available 48mm x 50m 1
JT-RT-LR-SA48-50-HC-* Honeycomb Reflective Tape - Single colours 48mm x 50m 1
*Add colour to code: *Add colour to code: R(Red),A(Amber),Y(Yellow), R(Red),A(Amber),Y(Yellow), WH (White) & GN (Green) WH (White) & GN (Green) For double colour: R/S (Red/Silver) or Y/BK (Yellow/Black)
PADLOCKS
Iron Padlocks Code
PL-40 40mm
Size
Description PL-40/50/60
MDL-60/70/80
MDL-60
Size
60mm
64
PL-60 60mm
MDL-70 70mm
MDL-80 80mm
Stainless Steel Lock, Brass inner gives max corrosion protection. High tensile strength
Insurance Padlocks Code IPL-60/70/80
50mm
Iron padlock and keys in blisterpack.
Circular Padlocks Code Description
PL-50
IPL-60 60mm
Size
Description
IPL-70 70mm
IPL-80 80mm
Max resistance to bolt cutters. E Brass Body hardened steel shackle.
P3
65
66
67
AC/DC SFC TOOLS
5th Edition 2016