Product Manual
8 Servo Drive Breakout
Updated on: 27th November 2017
Index About Elint Labz
2
Introduction
3
Specification
3
Operating voltage: 5V
3
Variants
3
Supported cables:
3
Details
4
Page 1 of 7
About Elint Labz Elint Labz (usually abbreviated as EL) is an electronics design & development tools designer & manufacturer with headquarters in Bengaluru, India. We design, develop & manufacture development boards based on micro-controller & microprocessors, breakout boards for various sensors & actuators. Our domain & expertise is in the area of Electronics & Embedded Systems. Elint Labz was founded in 2014 however the actual operations started from 2015 when it became a full time subsidiary of Hogst Innovative Solutions Pvt. Ltd. & is presently a part of Ajaramara Group a conglomerate of various domains of industries, registered in India as Ajaramara Dynamics Pvt. Ltd. under Companies Act of 2013. As in the name company (Elint Labz) – Electronic intelligence (ELINT) is intelligence gathered by the use of electronic sensors, Laboratories (LABZ) are facilities that provides controlled conditions in which scientific or technological research, experiments and measurement may be performed. EL is an enterprise built to develop smart & intelligent electronics & EL is committed to help achieve electronics literacy in India. No matter the vision or skill level, our products and resources are designed to make electronics & programmable development hardware more accessible. Elint Labz as a platform helps developers & young engineers from prototyping to product development. We provide open source hardware solutions and small quantity manufacturing services using a design from manufacturing framework. We are a strong promoter of the maker movement in India, most of the manufacturing happens with support of our various Indian partners & couple of our collaboration partners who have manufacturing & sourcing facilities in Germany, Korea & Shenzhen. To know more visit the about us section on our website: http://elintlabz.in/about-us/ Elint Labz (HQ) ˗ #200 1st main Arekere MICO layout 2nd stage Bengaluru 560076 KA [Marked on Google Maps] ✆ +91 855 377 2525 ː
[email protected]
Page 2 of 7
Introduction
Servo breakout is a board that can be used for interfacing servo motors . This Module is a simple solution for interfacing multiple servo motors and also controlling them. The pinout is directly compatible with Pluguino, and can also be used with other boards like arduino uno etc . this plug can be easily mounted anywhere using the screws.
Specification
● Operating voltage: 5V ● Size: 28mm x 38mm.
Variants ● None
Supported cables: ● 3-3A
Page 3 of 7
Details
It has dc power jack through which we can connect 5V power supply. Breakout board is designed in much simplified way for an user to interface 8 servos at a time with pluguino board .It has various applications in robotics. Servo breakout board has eight pins namely P1 , P2 , P3 , P4 , P5 , P6 , P7 , P8 and a gnd pin. Through which we can interface servo motors.
How to interface?
Use 3-3 A cable to connect Breakout Board to the Pluguino/Arduino. ● Connect one end of 3-3A cable to the servo breakout board. ● Connect other end to the data pin of Pluguino/Arduino uno/Arduino nano board. ● Ensure that black wire in both end of the cable is connected to the G pin. We can use any data pins for interfacing the servo motor as shown in the picture.
Page 4 of 7
It also has an Power Port as shown in figure through which we can give an power supply externally.
The above picture shows the connection between board and Dc jack. Page 5 of 7
Now in the below pictures we are considering data pin as P5 on Servo breakout board and then connecting Servo to Pin 8 of Pluguino board. You can use any data pins of the pluguino board.
Page 6 of 7
The below picture shows the final setup of Servo breakout board with pluguino board.
Page 7 of 7
Similarly, we can do for Arduino uno/ nano boards.
Page 8 of 7